Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment

[1]  Lichao Feng,et al.  Fracture analysis of U71Mn rail flash-butt welding joint , 2015 .

[2]  Huiyuan Wang,et al.  Evaluation of fatigue fracture mechanism in a flash butt welding joint of a U75V type steel for railroad applications , 2015 .

[3]  Hidekazu Murakawa,et al.  Welding deformation and residual stresses in arc welded lap joints by modified iterative analysis , 2015 .

[4]  Hidekazu Murakawa,et al.  Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start , 2015 .

[5]  M. Na,et al.  Residual stress measurement on the butt-welded area by electronic speckle pattern interferometry , 2015 .

[6]  R. Kovacevic,et al.  Experimental and numerical investigation of laser hot wire welding , 2015 .

[7]  D. Stone,et al.  Flash Butt Rail Weld Vertical Fractures , 2015, Journal of Failure Analysis and Prevention.

[8]  Yoon-Suk Chang,et al.  Fatigue life assessment of railway rail subjected to welding residual and contact stresses , 2014 .

[9]  Richard Moat,et al.  A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling , 2014 .

[10]  J. E. Garnham,et al.  Review: Low transformation temperature weld filler for tensile residual stress reduction , 2014 .

[11]  Hidekazu Murakawa,et al.  Influence of transformation induced plasticity on simulated results of welding residual stress in low temperature transformation steel , 2013 .

[12]  A. Becker,et al.  Finite element simulation of welding residual stresses in martensitic steel pipes , 2013 .

[13]  Parisa Hosseini Tehrani,et al.  Prediction of Residual Stress Distribution in Flash Butt Welded Rails using Electro-Thermo-Mechanical Simulation , 2013 .

[14]  D. Deng,et al.  Prediction of the residual welding stress in 2.25Cr-1Mo steel by taking into account the effect of the solid-state phase transformations , 2013, Acta Metallurgica Sinica (English Letters).

[15]  Michele Dassisti,et al.  Methods of measuring residual stresses in components , 2012 .

[16]  Thomas H. Hyde,et al.  Finite element simulation of welded P91 steel pipe undergoing post-weld heat treatment , 2011 .

[17]  Fucheng Zhang,et al.  Numerical Simulation of Flash Butt Welding of High Manganese Steel Crossing with Carbon Steel Rail , 2010 .

[18]  D. Deng.  FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects , 2009 .

[19]  W. Chiu,et al.  Verification of residual stresses in flash-butt-weld rails using neutron diffraction , 2006 .

[20]  Stefano Beretta,et al.  Mechanisms of mixed mode fatigue crack propagation at rail butt-welds , 2006 .

[21]  Xizhang Chen,et al.  Microstructure, residual stress and mechanical properties of a high strength steel weld using low transformation temperature welding wires , 2015 .

[22]  Hidekazu Murakawa,et al.  Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion , 2015 .

[23]  L. Godefroid,et al.  Fatigue failure of a flash butt welded rail. , 2014 .

[24]  Jonas W. Ringsberg,et al.  Fatigue crack growth in a welded rail under the influence of residual stresses , 2005 .

[25]  Zhou Zhen-guo,et al.  Comparison of and Study on the External Quality of the Imported and Domestic Rails , 2004 .