A cut-ply specimen for the mixed-mode fracture toughness and fatigue characterisation of FRPs

[1]  Stefanos Giannis,et al.  Utilising fracture mechanics principles for predicting the mixed-mode delamination onset and growth in tapered composite laminates , 2013 .

[2]  M. Wisnom,et al.  A new semi-empirical law for variable stress-ratio and mixed-mode fatigue delamination growth , 2013 .

[3]  G. Murri.  Evaluation of Delamination Growth Characterization Methods Under Mode I Fatigue Loading , 2012 .

[4]  M. Wisnom,et al.  A new semi-empirical model for stress ratio effect on mode II fatigue delamination growth , 2011 .

[5]  W. Johnston,et al.  Mode II Interlaminar Fracture Toughness and Fatigue Characterization of a Graphite Epoxy Composite Material , 2010 .

[6]  Wisnom,et al.  A cut ply specimen for the determination of mixed-mode interlaminar fracture toughness , 2010 .

[7]  Stephen R Hallett,et al.  A fatigue degradation law for cohesive interface elements – Development and application to composite materials , 2010 .

[8]  Constantinos Soutis,et al.  Measuring the notched compressive strength of composite laminates : Specimen size effects , 2008 .

[9]  Peter Davies,et al.  A status report on delamination resistance testing of polymer-matrix composites , 2008 .

[10]  Michael R Wisnom,et al.  A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens , 2007 .

[11]  A. Szekrényes,et al.  Over-leg Bending Test for Mixed-mode I/II Interlaminar Fracture in Composite Laminates , 2007 .

[12]  Leif Asp,et al.  Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading , 2004 .

[13]  P. Feraboli,et al.  A new mixed mode test for carbon/epoxy composite systems , 2003 .

[14]  Ronald Krueger,et al.  Analysis of Ninety Degree Flexure Tests for Characterization of Composite Transverse Tensile Strength , 2001 .

[15]  Emile S. Greenhalgh,et al.  Delamination Growth and Thresholds in a Carbon/Epoxy Composite under Fatigue Loading , 2001 .

[16]  P. Hansen,et al.  DCB, 4ENF and MMB Delamination Characterisation of S2/8552 and IM7/8552 , 1999 .

[17]  Michael V. Swain,et al.  Modified four-point bending specimen for determining the interface fracture energy for thin, brittle layers , 1998 .

[18]  B. Davidson,et al.  An unsymmetric double cantilever beam test for interfacial fracture toughness determination , 1997 .

[19]  S. Zhao,et al.  Mixed-Mode Delamination Behavior of Carbon/Epoxy Composites , 1995 .

[20]  Zhigang Suo,et al.  Delamination Specimens for Orthotropic Materials , 1990 .

[21]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[22]  A. Evans,et al.  The fracture energy of bimaterial interfaces , 1990 .

[23]  R. McMeeking,et al.  A method for calculating stress intensities in bimaterial fracture , 1989 .

[24]  A. G. Evans,et al.  An experimental study of the fracture resistance of bimaterial interfaces , 1989 .

[25]  John H. Crews,et al.  The mixed-mode bending method for delamination testing , 1989 .

[26]  J. G. Williams,et al.  On the calculation of energy release rates for cracked laminates , 1988 .

[27]  T R Brussat,et al.  Fracture Mechanics for Structural Adhesive Bonds , 1977 .

[28]  D. Tumino,et al.  Fatigue delamination experiments on GFRP and CFRP specimens under single and mixed fracture modes , 2011 .

[29]  M. Benzeggagh,et al.  Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading , 1997 .

[30]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .

[31]  B. Davidson,et al.  A single leg bending test for interfacial fracture toughness determination , 1996 .

[32]  Wisnom,et al.  Delamination in Composites with Terminating Internal Plies Under Tension Fatigue Loading , 1995 .

[33]  D. T. Lovell,et al.  The evolution of an aerospace material: Influence of design, manufacturing and in-service performance , 1994 .

[34]  S. Garbo.  Composite Materials: Testing and Design (Ninth Volume) , 1990 .

[35]  John D. Whitcomb,et al.  Characterization of Mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy , 1985 .