A novel vibration-based fault diagnostic algorithm for gearboxes under speed fluctuations without rotational speed measurement

Abstract The localized failures of gears introduce cyclic-transient impulses in the measured gearbox vibration signals. These impulses are usually identified from the sidebands around gear-mesh harmonics through the spectral analysis of cyclo-stationary signals. However, in practice, several high-powered applications of gearboxes like wind turbines are intrinsically characterized by nonstationary processes that blur the measured vibration spectra of a gearbox and deteriorate the efficacy of spectral diagnostic methods. Although order-tracking techniques have been proposed to improve the performance of spectral diagnosis for nonstationary signals measured in such applications, the required hardware for the measurement of rotational speed of these machines is often unavailable in industrial settings. Moreover, existing tacho-less order-tracking approaches are usually limited by the high time-frequency resolution requirement, which is a prerequisite for the precise estimation of the instantaneous frequency. To address such issues, a novel fault-signature enhancement algorithm is proposed that can alleviate the spectral smearing without the need of rotational speed measurement. This proposed tacho-less diagnostic technique resamples the measured acceleration signal of the gearbox based on the optimal warping path evaluated from the fast dynamic time-warping algorithm, which aligns a filtered shaft rotational harmonic signal with respect to a reference signal assuming a constant shaft rotational speed estimated from the approximation of operational speed. The effectiveness of this method is validated using both simulated signals from a fixed-axis gear pair under nonstationary conditions and experimental measurements from a 750-kW planetary wind turbine gearbox on a dynamometer test rig. The results demonstrate that the proposed algorithm can identify fault information from typical gearbox vibration measurements carried out in a resource-constrained industrial environment.

[1]  M. Farid Golnaraghi,et al.  Assessment of Gear Damage Monitoring Techniques Using Vibration Measurements , 2001 .

[2]  Tomasz Barszcz,et al.  Validation of vibration measurements for heavy duty machinery diagnostics , 2013 .

[3]  Jaspreet Singh Dhupia,et al.  A novel fault diagnostic technique for gearboxes under speed fluctuations without angular speed measurement , 2016, 2016 International Symposium on Flexible Automation (ISFA).

[4]  Bin Zhang,et al.  Application of Blind Deconvolution Denoising in Failure Prognosis , 2009, IEEE Transactions on Instrumentation and Measurement.

[5]  Huibin Lin,et al.  Gearbox coupling modulation separation method based on match pursuit and correlation filtering , 2016 .

[6]  Yimin Shao,et al.  Application of an improved dynamic time synchronous averaging method for fault diagnosis in conditions of speed fluctuation and no tachometer , 2016 .

[7]  Robert B. Randall,et al.  Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation) , 2005 .

[8]  Ahmet Kahraman,et al.  A theoretical and experimental investigation of modulation sidebands of planetary gear sets , 2009 .

[9]  Leonid M. Gelman,et al.  An automated methodology for performing time synchronous averaging of a gearbox signal without speed sensor , 2007 .

[10]  William D. Mark,et al.  Stationary transducer response to planetary-gear vibration excitation with non-uniform planet loading , 2009 .

[11]  Liu Hong,et al.  A time domain approach to diagnose gearbox fault based on measured vibration signals , 2014 .

[12]  Yaguo Lei,et al.  Phenomenological models of vibration signals for condition monitoring and fault diagnosis of epicyclic gearboxes , 2016 .

[13]  Eamonn J. Keogh,et al.  Exact indexing of dynamic time warping , 2002, Knowledge and Information Systems.

[14]  Guolin He,et al.  A novel order tracking method for wind turbine planetary gearbox vibration analysis based on discrete spectrum correction technique , 2016 .

[15]  Philip Chan,et al.  Toward accurate dynamic time warping in linear time and space , 2007, Intell. Data Anal..

[16]  Ahmet Kahraman,et al.  A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors , 2010 .

[17]  Fengshou Gu,et al.  Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping , 2013 .

[18]  Jérôme Antoni,et al.  Cyclostationary modelling of rotating machine vibration signals , 2004 .

[19]  Liu Hong,et al.  An explanation of frequency features enabling detection of faults in equally spaced planetary gearbox , 2014 .

[20]  Rui Ma,et al.  Research on dynamics and fault mechanism of spur gear pair with spalling defect , 2012 .

[21]  Zhipeng Feng,et al.  Joint envelope and frequency order spectrum analysis based on iterative generalized demodulation for planetary gearbox fault diagnosis under nonstationary conditions , 2016 .

[22]  José R. Perán,et al.  Angular resampling for vibration analysis in wind turbines under non-linear speed fluctuation , 2011 .

[23]  Chuan Li,et al.  Time-frequency signal analysis for gearbox fault diagnosis using a generalized synchrosqueezing transform , 2012 .

[24]  James McNames,et al.  Fourier Series Analysis of Epicyclic Gearbox Vibration , 2002 .

[25]  Liu Hong,et al.  A time-domain fault detection method based on an electrical machine stator current measurement for planetary gear-sets , 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[26]  Radoslaw Zimroz,et al.  A new method for the estimation of the instantaneous speed relative fluctuation in a vibration signal based on the short time scale transform , 2009 .

[27]  Yaguo Lei,et al.  A tacho-less order tracking technique for large speed variations , 2013 .

[28]  Zhihong Man,et al.  Optimal sinusoidal modelling of gear mesh vibration signals for gear diagnosis and prognosis , 2012 .

[29]  R. Uma Maheswari,et al.  Trends in non-stationary signal processing techniques applied to vibration analysis of wind turbine drive train – A contemporary survey , 2017 .

[30]  Y.-F. Lin,et al.  Further exploration of Vold–Kalman-filtering order tracking with shaft-speed information—I: Theoretical part, numerical implementation and parameter investigations , 2006 .