论文信息 - A NEW ANALYSIS OF DATA FROM STATNAMIC TESTS ON PILES IN CLAY

A NEW ANALYSIS OF DATA FROM STATNAMIC TESTS ON PILES IN CLAY

A series of pile load tests (maintained load tests, constant rate of penetration tests at different rates, and statnamic tests) was carried out on an instrumented model pile installed in clay beds prepared by consolidation of a slurry in a calibration chamber. The total load, shaft resistance and end bearing during the pile load tests were investigated. Following this, alternative methods of deriving the static load-settlement curve from a Statnamic test in clay taking into account damping effects have been proposed. These methods have then been used to interpret a statnamic test on a full size instrumented pile installed in a stiff glacial till.

William F. Anderson

[1] J. Meca,et al. Rate effects of rapid loading in clay soils. , 2005 .

[2] Michael Brown. The rapid load testing of piles in fine grained soils. , 2004 .

[3] E. Heerema. RELATIONSHIPS BETWEEN WALL FRICTION, DISPLACEMENT VELOCITY AND HORIZONTAL STRESS IN CLAY AND IN SAND, FOR PILE DRIVEABILITY ANALYSIS , 1979 .

[4] W F Anderson,et al. A CLAY CALIBRATION CHAMBER FOR TESTING FIELD DEVICES , 1991 .

[5] T J Poskitt,et al. Damping constants for pile driveability calculations , 1980 .

[6] H M Coyle,et al. Soil damping constants related to common soil properties in sands and clays , 1968 .

[7] Michael Brown,et al. Statnamic testing of model piles in a clay calibration chamber , 2004 .