The Design of a Piezoelectric Heart Assist Device

A piezoelectric heart assist device was designed, and preliminary tests were performed in vitro and in vivo. The device has the advantages of simple construction, low power consumption (approximately one watt), electrical rather than pneumatic drive, and noiseless operation. The device consists of piezoelectric bender elements forming two cantilevers. A unique feature of the device is that two tungsten alloy masses, 0.44 kg each, were added to the free ends of the cantilevers to reduce the resonant frequency to 2.5 Hz. The driving voltage was a 320 V peak-to-peak square wave synchronized with a paced heartbeat.

[1]  A. Kantrowitz,et al.  The experimental use of the diaphragm as an auxiliary myocardium. , 1958, Surgical forum.

[2]  A Kantrowitz,et al.  Initial clinical experience with intraaortic balloon pumping in cardiogenic shock. , 1968, JAMA.

[3]  B Parker,et al.  Peri-aortic diastolic augmentation. , 1969, Transactions - American Society for Artificial Internal Organs.

[4]  D Jaron,et al.  Analysis of assisted circulation. , 1972, Bibliotheca cardiologica.

[5]  W. Pierce,et al.  The piezoelectric artificial heart. , 1964, Transactions - American Society for Artificial Internal Organs.

[6]  W Welkowitz,et al.  A nonuniform hybrid model of the aorta. , 1967, Transactions of the New York Academy of Sciences.

[7]  John C. Schuder,et al.  Low-Frequency Piezoelectric Energy Conversion for an Intrathoracic Artificial Heart , 1968 .

[8]  R. Clauss,et al.  Assisted circulation. , 1961, The Ohio State medical journal.

[9]  W S Pierce,et al.  Segmented polyurethane: a polyether polymer. An initial evaluation for biomedical applications. , 1968, Journal of biomedical materials research.

[10]  W. Kolff,et al.  Extracorporeal assistance to the circulation and intraaortic balloon pumping. , 1962, Transactions - American Society for Artificial Internal Organs.