Modeling of end-use properties of poly(propylene/ethylene) resins

The objective of the present work is to develop empirical models to predict end-use properties of poly(ethylene/propylene) resins as functions of more fundamental molecular and morphological properties of the polymer resins. The final properties analyzed are two mechanical properties, rigidity and impact strength, and one thermal property, glass transition temperature. Two additional properties of practical importance are also modeled: the melt index and the xylene soluble content. Molecular and morphological properties selected for resin characterization are molecular weight distribution, polymer composition, degree of crystallinity, spherulite size distribution and rubbery phase dispersion. End-use, molecular and morphological properties were evaluated experimentally for 19 different commercial polypropylene copolymer grades. Statistical correlation analysis was performed for all variables and used as the basis for proper choice of inputs to each output model. Models developed are able to reproduce and predict experimental data within experimental accuracy and show that both polymerization and final resin processing variables may be of fundamental importance for definition of the final property balance of the polymer material.

[1]  C. Paulik,et al.  Influence of molecular structure on crystallization behaviour and mechanical properties of polypropylene , 1995 .

[2]  J. Flood,et al.  How molecular weight distribution and drawing temperature affect polypropylene physical properties and morphology , 1990 .

[3]  Richard H. Boyd,et al.  Glass Transition Temperatures of Polymers from Molecular Dynamics Simulations , 1994 .

[4]  E. Martuscelli,et al.  Melt rheology, phase structure and impact properties of injection-moulded samples of isotactic polypropylene/ethylene-propylene copolymer (iPP/EPR) blends: influence of molecular structure of EPR copolymers , 1993 .

[5]  T. C. Yu,et al.  Modifying polypropylene with a metallocene plastomer , 1996 .

[6]  R. Seyler.  Assignment of the glass transition , 1994 .

[7]  J. Rieger,et al.  The glass transition temperature of random copolymers: 1. Experimental data and the Gordon-Taylor equation , 1997 .

[8]  G. Cecchin.  In situ polyolefin alloys , 1994 .

[9]  G. Michler,et al.  Relationship between morphology and micromechanical toughening mechanisms in modified polypropylenes , 1996 .

[10]  JULIAN F. Johnson,et al.  Influence of molecular weight and molecular weight distribution on mechanical properties of polymers , 1982 .

[11]  Y. Mizutani,et al.  Annealing of commercial block polypropylene. II: Behavior of poly(ethylene-co-propylene) component , 1992 .

[12]  Z. Stachurski,et al.  The mechanical behavior of blends of polyethylene, polypropylene, and an ethylene–propylene block copolymer at −20°C , 1992 .

[13]  Xiao‐dong Zhang,et al.  Effect of converting the crystalline form from α to β on the mechanical properties of ethylene/propylene random and block copolymers , 1994 .

[14]  N. Brown,et al.  The effect of crystallinity on fracture and yielding of polyethylenes , 1995 .

[15]  E. Martuscelli,et al.  Polypropylene/ethylene-co-propylene blends: influence of molecular structure of EPR and composition on phase structure of isothermally crystallized samples , 1991 .

[16]  E. Martuscelli,et al.  Polypropylene/ethylene-co-propylene blends: influence of molecular structure and composition of EPR on melt rheology, morphology and impact properties of injection-moulded samples , 1991 .

[17]  J. Karger‐Kocsis,et al.  Comparison of the fracture and failure behavior of injection‐molded α‐ and β‐polypropylene in high‐speed three‐point bending tests , 1997 .

[18]  David Mautner Himmelblau,et al.  Process analysis by statistical methods , 1970 .

[19]  V. Divjaković,et al.  Effect of addition of polyethylene on properties of polypropylene/ethylene-propylene rubber blends , 1996 .

[20]  Markus Gahleitner,et al.  Crystallinity and mechanical properties of PP-homopolymers as influenced by molecular structure and nucleation , 1996 .

[21]  S. Tjong,et al.  Impact fracture toughness of β-form polypropylene , 1995 .

[22]  J. Rieger,et al.  The glass transition temperature of random copolymers: 2. Extension of the Gordon-Taylor equation for asymmetric Tg vs composition curves , 1997 .

[23]  R. Phillips,et al.  High modulus polypropylene: Effect of polymer and processing variables on morphology and properties , 1994 .

[24]  Raymond B. Seymour,et al.  Structure-property relationships in polymers , 1984 .

[25]  E. Martuscelli,et al.  Influence of molecular mass, thermal treatment and nucleating agent on structure and fracture toughness of isotactic polypropylene , 1993 .