Structural behavior of solid expandable tubular undergoes radial expansion process – Analytical, numerical, and experimental approaches

Abstract Today’s structures have to meet increasingly rigorous requirements during operation. The economic and human costs of failure during service impose a great responsibility on organizations and individuals who develop new products as well as those who select/integrate products in a final engineering design. A crucial aspect for successful product development and/or inclusion is the careful selection of the best material(s), derived from an informed awareness of the capabilities and opportunities afforded by all candidate materials, together with a design that takes full benefit of those competencies. Thick-wall tubular is an example where all these issues are playing a major role in deciding their industrial applications. Given for their desirable features of high strength and geometrical shape, they are widely used in aerospace, marine, military, automotive, oil and gas, and many other fields. This paper focuses on developing analytical solution to investigate the structural response of thick-wall tubulars undergo plastic deformation due to expanding them using a rigid mandrel of conical shape. Volume incompressible condition together with the Levy–Mises flow rule were used to develop the equations which relate the expansion ratio of the tubular to the length and thickness variations. Besides, Tresca’s yield criterion was used to include the plastic behavior of the tubular material. Further to this, a numerical model of the tubular expansion process was also developed using the commercial finite element software ABAQUS. Experiments of tubular expansion have been conducted using a full-scale test-rig in the Engineering Research Laboratory at Sultan Qaboos University to validate the analytical and numerical solutions. The developed analytical and numerical models are capable of predicting the stress field in the expansion zone, the force required for expansion, as well as the length and thickness variations induced in the tubular due to the expansion process. Comparison between analytical, experimental, and simulation results showed that a good agreement has been attained for various parameters.

[1]  Tasneem Pervez,et al.  Use of SET in cased and open holes : Comparison between aluminum and steel , 2008 .

[2]  M. Kargarnovin,et al.  Design of thick-walled cylindrical vessels under internal pressure based on elasto-plastic approach , 2009 .

[3]  Bill Dean,et al.  Increasing Solid Expandable Tubular Technology Reliability in a Myriad of Downhole Environments , 2003 .

[4]  Xin-Lin Gao.  Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a strain gradient plasticity theory , 2003 .

[5]  Lance Cook,et al.  Monodiameter Drilling Liner - From Concept to Reality , 2003 .

[6]  Tasneem Pervez,et al.  Simulation of Solid Tubular Expansion in Well Drilling Using Finite Element Method , 2005 .

[7]  P. Harris.  Carbonate reservoir characterization: A geologic-engineering analysis , 1993 .

[8]  T. Pervez,et al.  Experimental and numerical investigation of expandable tubular structural integrity for well applications , 2010 .

[9]  Hisham A. Nasr-El-Din,et al.  Characteristics of high-permeability zones using core analysis, and production logging data , 2007 .

[10]  Joseph Perry,et al.  Elasto-plastic stresses in thick walled cylinders , 2003 .

[12]  A. Karrech,et al.  Coupled Stress and Pressure Waves Propagation in an Elastic Solid Tube Submerged in Fluids , 2006 .

[13]  Ali Karrech,et al.  Analytical model for the expansion of tubes under tension , 2010 .

[15]  William C. Maurer,et al.  Analytical Model for Casing Expansion , 2005 .

[16]  Wilhelmus Christianus Maria Lohbeck,et al.  Expandable Wellbore Tubulars , 1991 .

[17]  Tasneem Pervez,et al.  Dynamic Effects of Mandrel/Tubular Interaction on Downhole Solid Tubular Expansion in Well Engineering , 2009 .

[18]  Oladele O. Owoeye,et al.  Optimisation of Well Economics By Application of Expandable Tubular Technology , 2000 .

[19]  Omar S. Al-Abri,et al.  Tube Expansion Under Various Down-Hole End Conditions , 2013 .

[20]  Franz Marketz,et al.  Inflow Profile Control in Horizontal Wells in a Fractured Carbonate using Swellable Elastomers , 2007 .

[21]  Omar S. Al-Abri,et al.  Optimum mandrel configuration for efficient down-hole tube expansion , 2012 .

[22]  Francesca Verga,et al.  New Semianalytic Technique to Determine Horizontal Well Productivity Index in Fractured Reservoirs. , 2005 .

[23]  Pascal Daniel Richard,et al.  Fractured Reservoir Characterization Using Dynamic Data In A Carbonate Field, Oman , 2005 .

[24]  Rashid Khan,et al.  Experimental and Numerical Simulation of In-Situ Tube Expansion for Deep Gas Wells , 2012 .

[25]  F. J. Klever,et al.  Analytical Burst Strength Prediction of OCTG With and Without Defects , 1998 .

[26]  Amran Ayob,et al.  Pressure limits of thick-walled cylinders , 2009 .

[27]  Phil Burge,et al.  Towards a Mono-Diameter Well - Advances in Expanding Tubing Technology , 2000 .

[28]  A. Seibi,et al.  Structural Behavior of a Solid Tubular Under Large Radial Plastic Expansion , 2005 .

[29]  Michael Bullock,et al.  Solid Expandable Tubular Technology - A Year of Case Histories in the Drilling Environment , 2001 .

[30]  Rune Gusevik,et al.  Reaching Deep Reservoir Targets Using Solid Expandable Tubulars , 2002 .

[31]  W. Drugan,et al.  Theory of plasticity , 1987 .

[32]  Lance Cook,et al.  Expandable Tubular Solutions , 1999 .

[33]  George C. Lee,et al.  Stresses in thick-walled conical shells , 1966 .

[34]  L. Ring,et al.  In-Situ Expansion of Casing and Tubing: Effect on Mechanical Properties and Resistance to Sulfide Stress Cracking , 2000 .