Integration of buildings with third-generation photovoltaic solar cells: a review

Clean-energy technologies have been welcomed due to environmental concerns and high fossil-fuel costs. Today, photovoltaic (PV) cells are among the most well-known technologies that are used today to integrate with buildings. Particularly, these cells have attracted the attention of researchers and designers, combined with the windows and facades of buildings, as solar cells that are in a typical window or facade of a building can reduce the demand for urban electricity by generating clean electricity. Among the four generations that have been industrialized in the development of solar cells, the third generation, including dye-sensitized solar cells (DSSCs) and perovskite, is used more in combination with the facades and windows of buildings. Due to the characteristics of these cells, the study of transparency, colour effect and their impact on energy consumption is considerable. Up to now, case studies have highlighted the features mentioned in the building combination. Therefore, this paper aims to provide constructive information about the practical and functional features as well as the limitations of this technology, which can be used as a reference for researchers and designers.

[1]  Jong Min Lee,et al.  Direct visualization of current-induced spin accumulation in topological insulators , 2018, Nature Communications.

[2]  W. Jo,et al.  A built-in electric field induced by ferroelectrics increases halogen-free organic solar cell efficiency in various device types , 2020 .

[3]  Hongxing Yang,et al.  Study on thermal performance of semi-transparent building-integrated photovoltaic glazings , 2008 .

[4]  J. Kalejs,et al.  Silicon ribbons and foils—state of the art , 2002 .

[5]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[6]  Jun Du,et al.  Solar Paint from TiO2 Particles Supported Quantum Dots for Photoanodes in Quantum Dot–Sensitized Solar Cells , 2018, ACS omega.

[7]  S. Tiwari,et al.  A review on perovskite solar cells: Evolution of architecture, fabrication techniques, commercialization issues and status , 2020 .

[8]  Performance Improvement of Dye-Sensitized Solar Cell- (DSSC-) Based Natural Dyes by Clathrin Protein , 2019, International Journal of Photoenergy.

[9]  Aritra Ghosh,et al.  Numerical studies of thermal comfort for semi-transparent building integrated photovoltaic (BIPV)-vacuum glazing system , 2019, Solar Energy.

[10]  Wolfgang Kowalsky,et al.  Efficient semitransparent inverted organic solar cells with indium tin oxide top electrode , 2009 .

[11]  K. Smolders,et al.  Bright light and mental fatigue: effects on alertness, vitality, performance and physiological arousal , 2014 .

[12]  Oleksandr Voznyy,et al.  Perovskite Thin Films via Atomic Layer Deposition , 2015, Advanced materials.

[13]  Aron Walsh,et al.  Ferroelectric materials for solar energy conversion: photoferroics revisited , 2014, 1412.6929.

[14]  P. Tontiwachwuthikul,et al.  Volumetric Properties and Viscosities for Aqueous N-Methyl-2-pyrrolidone Solutions from 25 °C to 70 °C , 2004 .

[15]  Saffa Riffat,et al.  Building integrated solar thermal collectors – A review , 2015 .

[16]  Minoru Mizuno,et al.  Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential application , 2008 .

[17]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[18]  A. Aberle,et al.  Highly Efficient Semi-Transparent Perovskite Solar Cells for Four Terminal Perovskite-Silicon Tandems. , 2019, ACS applied materials & interfaces.

[19]  J. Kettle,et al.  Outdoor organic photovoltaic module characteristics: Benchmarking against other PV technologies for performance, calculation of Ross coefficient and outdoor stability monitoring , 2018 .

[20]  A. Chakraborty,et al.  CoNi2S4-reduced graphene oxide nanohybrid: An excellent counter electrode for Pt-free DSSC , 2020 .

[21]  C. M. Li,et al.  Rational design of triphenylamine dyes for highly efficient p-type dye sensitized solar cells , 2014 .

[22]  E. Caamaño-Martín,et al.  ‘State-of-the-art’ of building integrated photovoltaic products , 2013 .

[23]  Hongxing Yang,et al.  Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems , 2013 .

[24]  Y. Sulaiman,et al.  Review on the effect of compact layers and light scattering layers on the enhancement of dye-sensitized solar cells , 2021 .

[25]  Aritra Ghosh,et al.  Investigation of thermal and electrical performances of a combined semi-transparent PV-vacuum glazing , 2018, Applied Energy.

[26]  M. Mazloum‐Ardakani,et al.  The investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell , 2017 .

[27]  R. Friend,et al.  Harnessing singlet exciton fission to break the Shockley–Queisser limit , 2017 .

[28]  Martin A. Green,et al.  Third generation photovoltaics: Ultra‐high conversion efficiency at low cost , 2001 .

[29]  Francesco Fiorito,et al.  Building integration of semitransparent perovskite-based solar cells: Energy performance and visual comfort assessment , 2017 .

[30]  H. Kreft,et al.  Economic use of plants is key to their naturalization success , 2020, Nature Communications.

[31]  M. S. Akhtar,et al.  Effective inorganic-organic composite electrolytes for efficient solid-state dye sensitized solar cells , 2013, 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC).

[32]  Kisuk Kang,et al.  Application of transparent dye-sensitized solar cells to building integrated photovoltaic systems , 2011 .

[33]  Nikolaos Skandalos,et al.  PV glazing technologies , 2015 .

[34]  Arno Schlueter,et al.  High-resolution, parametric BIPV and electrical systems modeling and design , 2019, Applied Energy.

[35]  M. Grätzel,et al.  Carbon Nanoparticles in High‐Performance Perovskite Solar Cells , 2018 .

[36]  Brian Norton,et al.  Advances in switchable and highly insulating autonomous (self-powered) glazing systems for adaptive low energy buildings , 2018, Renewable Energy.

[37]  Walid R. Issa,et al.  Thermal performance of semitransparent CdTe BIPV window at temperate climate , 2020, Solar Energy.

[38]  Fahad A. Al-Sulaiman,et al.  Review of recent developments and persistent challenges in stability of perovskite solar cells , 2018, Renewable and Sustainable Energy Reviews.

[39]  S. Jenatsch,et al.  A transparent, solvent-free laminated top electrode for perovskite solar cells , 2016, Science and technology of advanced materials.

[40]  Man Kwong Wong,et al.  Stability issues of the next generation solar cells , 2016 .

[41]  Yongfang Li,et al.  Flexible and Semitransparent Organic Solar Cells , 2018 .

[42]  Danny H.W. Li,et al.  Energy and cost analysis of semi-transparent photovoltaic in office buildings , 2009 .

[43]  David Hui,et al.  Mechanical performance of foam-filled lattice composite panels in four-point bending: Experimental investigation and analytical modeling , 2014 .

[44]  M. Shim,et al.  Towards the commercialization of colloidal quantum dot solar cells: perspectives on device structures and manufacturing , 2020 .

[45]  Martin A. Green,et al.  Third generation photovoltaics , 2002, 2002 Conference on Optoelectronic and Microelectronic Materials and Devices. COMMAD 2002. Proceedings (Cat. No.02EX601).

[46]  S. Zakeeruddin,et al.  High performance carbon-based printed perovskite solar cells with humidity assisted thermal treatment , 2017 .

[47]  U. Buttner,et al.  Thermochromic Perovskite Inks for Reversible Smart Window Applications , 2017 .

[48]  Francisco-Eugenio Lopez Giraldo,et al.  Calibration method for Correlated Color Temperature (CCT) measurement using RGB color sensors , 2013, Symposium of Signals, Images and Artificial Vision - 2013: STSIVA - 2013.

[49]  K. Lobato.  Charge transport and recombination in dye-sensitized nanocrystalline solar cells , 2007 .

[50]  Xudong Xiao,et al.  Mechanically-stacked perovskite/CIGS tandem solar cells with efficiency of 23.9% and reduced oxygen sensitivity , 2018 .

[51]  Y. Hao,et al.  An efficient TeO2/Ag transparent top electrode for 20%-efficiency bifacial perovskite solar cells with a bifaciality factor exceeding 80% , 2019, Journal of Materials Chemistry A.

[52]  David K. Benson,et al.  Semi-transparent a-SiC:H solar cells for self-powered photovoltaic-electrochromic devices , 1996 .

[53]  Richard Corkish,et al.  A life cycle assessment of perovskite/silicon tandem solar cells , 2017 .

[54]  N. Lewis,et al.  Nanotechnology for catalysis and solar energy conversion , 2020, Nanotechnology.

[55]  G. Righini,et al.  Solar cells' evolution and perspectives: a short review , 2020 .

[56]  C. Ballif,et al.  Field Performance versus Standard Test Condition Efficiency of Tandem Solar Cells and the Singular Case of Perovskites/Silicon Devices. , 2018, The journal of physical chemistry letters.

[57]  S. Shobih,et al.  A Comparison of the Utilization of Carbon Nanopowder and Activated Carbon as Counter Electrode for Monolithic Dye-Sensitized Solar Cells (DSSC) , 2018, Jurnal Elektronika dan Telekomunikasi.

[58]  Fujun Zhang,et al.  Over 13% Efficiency Ternary Nonfullerene Polymer Solar Cells with Tilted Up Absorption Edge by Incorporating a Medium Bandgap Acceptor , 2018, Advanced Energy Materials.

[59]  Qamar Wali,et al.  Advances in stability of perovskite solar cells , 2020 .

[60]  Y. Özen,et al.  Comparison of TiO2 and ZnO electron selective layers on the inverted-type polymer solar cells , 2020, Polymer Bulletin.

[61]  Fujun Zhang,et al.  Thick‐Film Organic Solar Cells Achieving over 11% Efficiency and Nearly 70% Fill Factor at Thickness over 400 nm , 2020, Advanced Functional Materials.

[62]  Gang Li,et al.  A Semi‐transparent Plastic Solar Cell Fabricated by a Lamination Process , 2008 .

[63]  Shangfeng Yang,et al.  A strategic review on processing routes towards highly efficient perovskite solar cells , 2018 .

[64]  Thomas Jackson,et al.  Energy and economic evaluation of building-integrated photovoltaics , 2001 .

[65]  Improving the effective photovoltaic performance in dye-sensitized solar cells using an azobenzenecarboxylic acid-based system , 2019, Heliyon.

[66]  Aritra Ghosh,et al.  Color Comfort Evaluation of Dye-Sensitized Solar Cell (DSSC) Based Building-Integrated Photovoltaic (BIPV) Glazing after 2 Years of Ambient Exposure , 2019, The Journal of Physical Chemistry C.

[67]  Aritra Ghosh,et al.  Status of BIPV and BAPV System for Less Energy-Hungry Building in India—A Review , 2020, Applied Sciences.

[68]  A. Hagfeldt,et al.  Reducing Surface Recombination by a Poly(4-vinylpyridine) Interlayer in Perovskite Solar Cells with High Open-Circuit Voltage and Efficiency , 2018, ACS omega.

[69]  Tapas K. Mallick,et al.  Evaluation of colour properties due to switching behaviour of a PDLC glazing for adaptive building integration , 2018 .

[70]  S. Siebentritt.  Why are kesterite solar cells not 20% efficient? , 2013 .

[71]  Henk J. Bolink,et al.  Perovskite solar cells employing organic charge-transport layers , 2013, Nature Photonics.

[72]  Fujun Zhang,et al.  Highly efficient quaternary organic photovoltaics by optimizing photogenerated exciton distribution and active layer morphology , 2020 .

[73]  C. Gueymard,et al.  Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems , 2009 .

[74]  C. Su,et al.  Design and development of cyclometalated ruthenium complexes containing thiophenyl-pyridine ligand for dye-sensitized solar cells , 2014 .

[75]  Fujun Zhang,et al.  Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers , 2020 .

[76]  Konrad Wojciechowski,et al.  C60 as an Efficient n-Type Compact Layer in Perovskite Solar Cells. , 2015, The journal of physical chemistry letters.

[77]  J. Nelson.  The physics of solar cells , 2003 .

[78]  Henry J. Snaith,et al.  The renaissance of dye-sensitized solar cells , 2012, Nature Photonics.

[79]  Chi-ming Lai,et al.  Solar façades: A review , 2015 .

[80]  Ying Huang,et al.  Building-integrated photovoltaics (BIPV) in architectural design in China , 2011 .

[81]  A study of electrochemical behavior of quinazolin derivatives as novel additives and their specific effects on the performance of dye-sensitized solar cells , 2017, Ionics.

[82]  T. Aernouts.  Efficient Structures and Processes for Reliable Perovskite Solar Modules , 2019, Proceedings of the 11th International Conference on Hybrid and Organic Photovoltaics.

[83]  Hongxing Yang,et al.  Numerical evaluation of the mixed convective heat transfer in a double-pane window integrated with see-through a-Si PV cells with low-e coatings , 2010 .

[84]  Dong Yoon Lee,et al.  Grid type dye-sensitized solar cell module with carbon counter electrode , 2008 .

[85]  Shengsheng He,et al.  A Short Progress Report on High-Efficiency Perovskite Solar Cells , 2017, Nanoscale Research Letters.

[86]  Cherie R. Kagan,et al.  Building devices from colloidal quantum dots , 2016, Science.

[87]  Rahman Saidur,et al.  Recent progress in perovskite solar cells , 2018 .

[88]  Andrea Acquaviva,et al.  A Novel Integrated Real-time Simulation Platform for Assessing Photovoltaic Penetration Impacts in Smart Grids , 2017 .

[89]  Guangda Niu,et al.  Review of recent progress in chemical stability of perovskite solar cells , 2015 .

[90]  Hideaki Araki,et al.  Development of CZTS-based thin film solar cells , 2009 .

[91]  A. Pugazhendhi,et al.  Performance of TiO2 nanoparticles synthesized by microwave and solvothermal methods as photoanode in dye-sensitized solar cells (DSSC) , 2020, International Journal of Hydrogen Energy.

[92]  H. Rensmo,et al.  Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures—A Photoelectron Spectroscopy Investigation , 2015 .

[93]  Ranko Goic,et al.  review of solar photovoltaic technologies , 2011 .

[94]  Martin A. Green.  Third Generation Photovoltaics: Assessment of progress over the last decade , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[95]  B. Liu,et al.  A Narrow‐Bandgap n‐Type Polymer with an Acceptor–Acceptor Backbone Enabling Efficient All‐Polymer Solar Cells , 2020, Advanced materials.

[96]  Pierluigi Siano,et al.  Stochastic optimal scheduling of distributed energy resources with renewables considering economic and environmental aspects , 2018 .

[97]  D. Shin,et al.  Recent advancements in and perspectives on flexible hybrid perovskite solar cells , 2019, Journal of Materials Chemistry A.

[98]  Deo Prasad,et al.  Designing with Solar Power: A Source Book for Building Integrated Photovoltaics (BiPV) , 2005 .

[99]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .

[100]  Efficient cosensitization of new organic dyes containing bipyridine anchors with porphyrins for dye-sensitized solar cells , 2020 .

[101]  Ricardo Rüther,et al.  Technical and economic evaluation of thin-film CdTe building-integrated photovoltaics (BIPV) replacing façade and rooftop materials in office buildings in a warm and sunny climate , 2018 .

[102]  Lin Lu,et al.  Overall energy performance of semi-transparent single-glazed photovoltaic (PV) window for a typical office in Hong Kong , 2013 .

[103]  S. Yusuf,et al.  Efficiency Enhancement of Dye-Sensitized Solar Cells (DSSCs) using Copper Nanopowder (CuNW) in TiO2 as Photoanode , 2019, IOP Conference Series: Materials Science and Engineering.

[104]  Bjørn Petter Jelle,et al.  Building integrated photovoltaic products: A state-of-the-art review and future research opportunities , 2012 .

[105]  Miguel Brito,et al.  Modelling solar potential in the urban environment: State-of-the-art review , 2015 .

[106]  J. M. Kroon,et al.  Recent Advances in Dye-Sensitized Solar Cells , 2007 .

[107]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[108]  Junqiao Wu,et al.  Third generation photovoltaics , 2009 .

[109]  Fujun Zhang,et al.  Alloy-like ternary polymer solar cells with over 17.2% efficiency. , 2020, Science bulletin.

[110]  Takahiko Miyazaki,et al.  Energy savings of office buildings by the use of semi-transparent solar cells for windows , 2005 .

[111]  Akash Kumar Shukla,et al.  Design, simulation and economic analysis of standalone roof top solar PV system in India , 2016 .

[112]  Jing Xu,et al.  Integrated smart electrochromic windows for energy saving and storage applications. , 2014, Chemical communications.

[113]  Jianqi Zhang,et al.  Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency , 2020, Advanced materials.

[114]  L. Qiu,et al.  Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules , 2018, Nature Communications.

[115]  Sisi He,et al.  Scalable Fabrication of Stable High Efficiency Perovskite Solar Cells and Modules Utilizing Room Temperature Sputtered SnO2 Electron Transport Layer , 2018, Advanced Functional Materials.

[116]  C. D. Kartha,et al.  Modification of the optoelectronic properties of sprayed In2S3 thin films by indium diffusion for application as buffer layer in CZTS based solar cell , 2013 .

[117]  Jun-Tae Kim,et al.  Performance Evaluation of DSC Windows for Buildings , 2013 .

[118]  N. M. Mohamed,et al.  Environmental performance of window-integrated systems using dye-sensitised solar module technology in Malaysia , 2019, Solar Energy.

[119]  S. Mhaisalkar,et al.  Bifacial, Color-Tunable Semitransparent Perovskite Solar Cells for Building Integrated Photovoltaics. , 2019, ACS applied materials & interfaces.

[120]  Aritra Ghosh.  Potential of building integrated and attached/applied photovoltaic (BIPV/BAPV) for adaptive less energy-hungry building’s skin: A comprehensive review , 2020, Journal of Cleaner Production.

[121]  H. Hosono,et al.  Extraordinary Strong Band‐Edge Absorption in Distorted Chalcogenide Perovskites , 2020, Solar RRL.

[122]  Aritra Ghosh,et al.  Investigation of semi-transparent dye-sensitized solar cells for fenestration integration , 2019, Renewable Energy.

[123]  Srinivas Sista,et al.  Highly Efficient Tandem Polymer Photovoltaic Cells , 2010, Advanced materials.

[124]  Tapas K. Mallick,et al.  Perovskite Solar Cells for BIPV Application: A Review , 2020, Buildings.

[125]  Henry J. Snaith,et al.  Stability of Metal Halide Perovskite Solar Cells , 2015 .

[126]  Su-Huai Wei,et al.  Halide perovskite materials for solar cells: a theoretical review , 2015 .

[127]  Olle Inganäs,et al.  Interlayer for Modified Cathode in Highly Efficient Inverted ITO‐Free Organic Solar Cells , 2012, Advanced materials.

[128]  Endre Horváth,et al.  Ultra-Low Thermal Conductivity in Organic-Inorganic Hybrid Perovskite CH3NH3PbI3. , 2014, The journal of physical chemistry letters.

[129]  Synthesis of 2-amino-4-(4-(methylamino)phenyl)-6-phenylnicotinonitrile as a new additive for the passivation of the TiO 2 surface and retarding recombination in dye-sensitized solar cells , 2018 .

[130]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[131]  Aritra Ghosh,et al.  Carbon counter electrode mesoscopic ambient processed & characterised perovskite for adaptive BIPV fenestration , 2020 .

[132]  Ming‐Chung Wu,et al.  High-Performance Perovskite Solar Cells Based on Low-Temperature Processed Electron Extraction Layer , 2019, Front. Mater..

[133]  M. Grätzel,et al.  Greener, Nonhalogenated Solvent Systems for Highly Efficient Perovskite Solar Cells , 2018 .

[134]  N. Amin,et al.  Organosoluble starch derivative as quasi-solid electrolytes in DSSC: Unravelling the synergy between electrolyte rheology and photovoltaic properties , 2020 .

[135]  Shangfeng Yang,et al.  Carbon–Oxygen‐Bridged Ladder‐Type Building Blocks for Highly Efficient Nonfullerene Acceptors , 2018, Advanced materials.

[136]  B. Liu,et al.  A Trifluoromethyl Group Modified Non-fullerene Acceptor Towards Improved Power Conversion Efficiency Over 13% in Polymer Solar Cells. , 2020, ACS applied materials & interfaces.

[137]  Giyoong Tae,et al.  Efficient Polymer Solar Cells Fabricated by Simple Brush Painting , 2007 .

[138]  Yuting Chen,et al.  Theoretical study of building-integrated photovoltaics based on perovskite single junction and perovskite/silicon tandem solar cells , 2020 .

[139]  Hongzheng Chen,et al.  Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model , 2020 .

[140]  Po-Chun Chen,et al.  Heat insulation solar glass and application on energy efficiency buildings , 2014 .

[141]  Li Yu,et al.  High‐Efficiency and Reliable Smart Photovoltaic Windows Enabled by Multiresponsive Liquid Crystal Composite Films and Semi‐Transparent Perovskite Solar Cells , 2019, Advanced Energy Materials.

[142]  Zhike Liu,et al.  Ultrathin and flexible perovskite solar cells with graphene transparent electrodes , 2016 .

[143]  T. Miyasaka,et al.  Halide Perovskite Photovoltaics: Background, Status, and Future Prospects. , 2019, Chemical reviews.

[144]  Akash Kumar Shukla,et al.  A comprehensive review on design of building integrated photovoltaic system , 2016 .

[146]  A. Jen,et al.  Highly efficient all-inorganic perovskite solar cells with suppressed non-radiative recombination by a Lewis base , 2020, Nature Communications.

[147]  Yong Yan,et al.  Enhanced performance of perovskite solar cells by ultraviolet-ozone treatment of mesoporous TiO2 , 2018 .

[148]  Jyh‐Chiang Jiang,et al.  Theoretical study on halide and mixed halide Perovskite solar cells: Effects of halide atoms on the stability and electronic properties , 2019, Journal of the Chinese Chemical Society.

[149]  A. Soman,et al.  Colored solar cells with spectrally selective photonic crystal reflectors for application in building integrated photovoltaics , 2019, Solar Energy.

[150]  Prashant Baredar,et al.  Comparison of BIPV and BIPVT: A review , 2017, Resource-Efficient Technologies.

[151]  M. Guiver,et al.  Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane , 2019, Nature Communications.

[152]  S. Sundaram,et al.  Perceiving the temperature coefficients of carbon-based perovskite solar cells , 2020, Sustainable Energy & Fuels.

[153]  Nalanie Mithraratne,et al.  Lifetime performance of semi-transparent building-integrated photovoltaic (BIPV) glazing systems in the tropics , 2014 .

[154]  S. Riffat,et al.  Thermal performance investigation of heat insulation solar glass: A comparative experimental study , 2015 .

[155]  Eric T. Hoke,et al.  A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. , 2014, Angewandte Chemie.

[156]  Udo Bach,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells , 2000 .

[157]  Aldo Di Carlo,et al.  Comparative analysis of the outdoor performance of a dye solar cell mini‐panel for building integrated photovoltaics applications , 2015 .

[158]  Elvira Fortunato,et al.  Silicon thin film solar cells on commercial tiles , 2011 .

[159]  Shangfeng Yang,et al.  18% Efficiency organic solar cells. , 2020, Science bulletin.

[160]  M. H. Abdullah,et al.  Photoanode of nanostructured TiO2 prepared by ultrasonic irradiation assisted of sol-gel with P-25 for dye-sensitized Solar Cells , 2013, RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics.

[161]  Guohua Wu,et al.  Influence of different acceptor groups in julolidine-based organic dye-sensitized solar cells , 2013 .

[162]  Walid R. Issa,et al.  Evaluation of solar factor using spectral analysis for CdTe photovoltaic glazing , 2019, Materials Letters.

[163]  H. Woo,et al.  Fluorine Substituted Bithiophene Imide-Based n-Type Polymer Semiconductor for High-Performance Organic Thin-Film Transistors and All-Polymer Solar Cells (Solar RRL 2∕2019) , 2019, Solar RRL.

[164]  Peter Lund,et al.  Device Physics of Dye Solar Cells , 2010, Advanced materials.

[165]  Tilmann E. Kuhn,et al.  Electricity yield simulation for the building-integrated photovoltaic system installed in the main building roof of the Fraunhofer Institute for Solar Energy Systems ISE , 2016 .

[166]  David Hyman Gordon,et al.  Renewable Energy Resources , 1986 .

[167]  Anil Kumar,et al.  Natural dyes for dye sensitized solar cell: A review , 2017 .

[168]  David T. Limmer,et al.  Thermochromic halide perovskite solar cells , 2018, Nature Materials.

[169]  S. Stranks,et al.  The influence of the Rashba effect , 2018, Nature Materials.

[170]  Reinhard Schwödiauer,et al.  Flexible high power-per-weight perovskite solar cells with chromium oxide-metal contacts for improved stability in air. , 2015, Nature Materials.

[171]  David B Mitzi,et al.  High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber , 2010, Advanced materials.

[172]  Yu Tian,et al.  Perovskite-Based Solar Cells: Materials, Methods, and Future Perspectives , 2018 .

[173]  Juan Bisquert,et al.  Physical Chemical Principles of Photovoltaic Conversion with Nanoparticulate, Mesoporous Dye-Sensitized Solar Cells , 2004 .

[174]  Rizalman Mamat,et al.  BIPV in Southeast Asian countries – opportunities and challenges , 2017 .

[175]  H. Snaith,et al.  The Importance of Perovskite Pore Filling in Organometal Mixed Halide Sensitized TiO2-Based Solar Cells. , 2014, The journal of physical chemistry letters.

[176]  Rawad K. Hallani,et al.  Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability , 2020 .

[177]  Jianning Ding,et al.  The dye adsorption optimization of ZnO nanorod-based dye-sensitized solar cells , 2014 .

[178]  Christoph J. Brabec,et al.  Pushing efficiency limits for semitransparent perovskite solar cells , 2015 .

[179]  Tapas K. Mallick,et al.  Enhancing the performance of building integrated photovoltaics , 2011 .

[180]  S. C. Solanki,et al.  Photovoltaic modules and their applications: A review on thermal modelling , 2011 .

[181]  Federico Bella,et al.  Perovskite Solar Cells: From the Laboratory to the Assembly Line. , 2018, Chemistry.

[182]  Hyunhyub Ko,et al.  Ultrathin, lightweight and flexible perovskite solar cells with an excellent power-per-weight performance , 2019, Journal of Materials Chemistry A.

[183]  M. Mazloum‐Ardakani,et al.  Recent advancements in compact layer development for perovskite solar cells , 2018, Heliyon.

[184]  P. Malbranche,et al.  Thermal analysis of a BIPV system by various modelling approaches , 2017 .

[185]  Ruth J. Muschel,et al.  Corrigendum: Cancer cells that survive radiation therapy acquire HIF-1 activity and translocate toward tumour blood vessels , 2013, Nature Communications.

[186]  M. Kovalenko,et al.  Temperature dependent behaviour of lead sulfide quantum dot solar cells and films , 2016 .

[187]  David Moreno,et al.  Design optimisation of perforated solar façades in order to balance daylighting with thermal performance , 2017 .

[188]  Bin Fan,et al.  Large area perovskite solar cell module , 2017 .

[189]  Adel S. Al-Jimaz,et al.  Effect of temperature and chain length on the viscosity and surface tension of binary systems of N,N-dimethylformamide with 1-octanol, 1-nonanol and 1-decanol , 2014 .

[190]  Jong-ho Yoon,et al.  Power performance analysis of a transparent DSSC BIPV window based on 2 year measurement data in a full-scale mock-up , 2018, Applied Energy.

[191]  Hyuck-Mo Lee,et al.  High‐Performance Solution‐Processed Double‐Walled Carbon Nanotube Transparent Electrode for Perovskite Solar Cells , 2019, Advanced Energy Materials.

[192]  J Romero,et al.  Calculating correlated color temperatures across the entire gamut of daylight and skylight chromaticities. , 1999, Applied optics.

[193]  V. Fthenakis.  Sustainability metrics for extending thin-film photovoltaics to terawatt levels , 2012 .

[194]  Aritra Ghosh,et al.  Colour properties and glazing factors evaluation of multicrystalline based semi-transparent Photovoltaic-vacuum glazing for BIPV application , 2019, Renewable Energy.

[195]  S. Foo,et al.  Modeling of High-Efficiency Multi-Junction Polymer and Hybrid Solar Cells to Absorb Infrared Light , 2019, Polymers.

[196]  Yanming Sun,et al.  Polymer Donors for High-Performance Non-Fullerene Organic Solar Cells. , 2019, Angewandte Chemie.

[197]  Matthew C Beard,et al.  The promise and challenge of nanostructured solar cells. , 2014, Nature nanotechnology.

[198]  Jun Lin,et al.  Layered organic-inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering , 2010 .

[199]  Zhanhao Hu,et al.  Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation , 2019, Nature Energy.

[200]  Nam-Gyu Park,et al.  Perovskite solar cells: an emerging photovoltaic technology , 2015 .

[201]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[202]  G. Lu,et al.  Enhanced photovoltaic properties of dye-sensitized solar cells using three-component CNF/TiO2/Au heterostructure. , 2019, Journal of colloid and interface science.

[203]  Fanan Wei,et al.  Recent progress in perovskite solar cells: the perovskite layer , 2020, Beilstein journal of nanotechnology.

[204]  Rizalman Mamat,et al.  BIPV based sustainable building in South Asian countries , 2018 .

[205]  Seeram Ramakrishna,et al.  Controlled electron injection and transport at materials interfaces in dye sensitized solar cells , 2009 .

[206]  M. Nazeeruddin,et al.  Frontiers, opportunities, and challenges in perovskite solar cells: A critical review , 2018, Journal of Photochemistry and Photobiology C: Photochemistry Reviews.

[207]  Jun-Ki Choi,et al.  Improving the prediction performance of the finite element model for estimating the technical performance of the distributed generation of solar power system in a building façade , 2018 .

[208]  Pengwan Chen,et al.  Strain engineering in perovskite solar cells and its impacts on carrier dynamics , 2019, Nature Communications.

[209]  Ruei-Tang Chen,et al.  Design and fabrication of diffusive solar cell window , 2012 .

[210]  H. Flammersberger.  Experimental study of Cu2ZnSnS4 thin films for solar cells , 2010 .

[211]  Justin Wong,et al.  A COMPARISON OF WINDOW MODELING METHODS IN ENERGYPLUS 4.0 , 2010 .

[212]  Anusorn Kongkanand,et al.  Quantum dot solar cells. Tuning photoresponse through size and shape control of CdSe-TiO2 architecture. , 2008, Journal of the American Chemical Society.

[213]  Nalanie Mithraratne,et al.  Energy analysis of semi-transparent BIPV in Singapore buildings , 2013 .

[214]  Emmanuel Rey,et al.  Integrated thinking for photovoltaics in buildings , 2018, Nature Energy.

[215]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[216]  C. McNeill,et al.  High‐Performance All‐Polymer Solar Cells Enabled by n‐Type Polymers with an Ultranarrow Bandgap Down to 1.28 eV , 2020, Advanced materials.

[217]  Henry J Snaith,et al.  Present status and future prospects of perovskite photovoltaics , 2018, Nature Materials.

[218]  Jean-Louis Scartezzini,et al.  Reactively sputtered coatings on architectural glazing for coloured active solar thermal facades , 2014 .

[219]  E. Misran,et al.  Anthocyanin as natural dye in DSSC fabrication: A review , 2021 .

[220]  Foo Wah Low,et al.  Recent developments of graphene-TiO2 composite nanomaterials as efficient photoelectrodes in dye-sensitized solar cells: A review , 2018 .

[221]  Tapas K. Mallick,et al.  Analysis of the daylight performance of window integrated photovoltaics systems , 2019 .

[222]  Kala Ramakrishnan,et al.  Efficient charge collection of photoanodes and light absorption of photosensitizers: A review , 2020, International Journal of Energy Research.

[223]  Wei Wang,et al.  Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency , 2014 .

[224]  Jie Jia,et al.  Investigation on the daylight and overall energy performance of semi-transparent photovoltaic facades in cold climatic regions of China , 2018, Applied Energy.

[225]  Aslihan Babayigit,et al.  Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite , 2015 .

[226]  Liyuan Han,et al.  Highly conjugated electron rich thiophene antennas on phenothiazine and phenoxazine-based sensitizers for dye sensitized solar cells , 2014 .

[227]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[228]  Kah-Yoong Chan,et al.  A Review on Semitransparent Solar Cells for Real-Life Applications Based on Dye-Sensitized Technology , 2021, IEEE Journal of Photovoltaics.

[229]  Fujun Zhang,et al.  Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells , 2016, Advanced materials.

[230]  A. Khoshroo,et al.  Enhanced performance of dye-sensitized solar cells with dual-function coadsorbent: reducing the surface concentration of dye-iodine complexes concomitant with attenuated charge recombination. , 2015, Physical chemistry chemical physics : PCCP.

[231]  Aritra Ghosh,et al.  Electrically actuated visible and near-infrared regulating switchable smart window for energy positive building: A review , 2021 .

[232]  Jong-ho Yoon,et al.  Practical application of building integrated photovoltaic (BIPV) system using transparent amorphous silicon thin-film PV module , 2011 .

[233]  Y. Hao,et al.  Efficient Semitransparent Perovskite Solar Cells Using a Transparent Silver Electrode and Four-Terminal Perovskite/Silicon Tandem Device Exploration , 2018 .

[234]  Aritra Ghosh,et al.  The colour rendering index and correlated colour temperature of dye-sensitized solar cell for adaptive glazing application , 2018 .

[235]  G. Pandian,et al.  Commercial and residential building energy labeling , 2005 .

[236]  Asif Javed.  The Effect of Temperatures on the Silicon Solar Cell , 2014 .

[237]  Sandeep Kumar Pathak,et al.  Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells , 2013, Nature Communications.

[238]  M. Johnston,et al.  Highly Efficient Perovskite Solar Cells with Tunable Structural Color , 2015, Nano letters.

[239]  M. Green,et al.  Physics of the temperature coefficients of solar cells , 2015 .

[240]  I. Moreels,et al.  Light absorption by colloidal semiconductor quantum dots , 2012 .

[241]  Francesco Martellotta,et al.  Comparing energy performance of different semi-transparent, building-integrated photovoltaic cells applied to "reference" buildings , 2017 .

[242]  Bao-Jie He,et al.  Optimizing Building Envelope Dimensions for Passive Solar Houses in the Qinghai-Tibetan Region: Window to Wall Ratio and Depth of Sunspace , 2019, Journal of Thermal Science.

[243]  Fujun Zhang,et al.  Semitransparent polymer solar cells with 12.37% efficiency and 18.6% average visible transmittance. , 2020, Science bulletin.

[244]  A. Sproul,et al.  Numerical simulation study of BIPV/T double-skin facade for various climate zones in Australia: Effects on indoor thermal comfort , 2019, Building Simulation.

[245]  Yongxiu He,et al.  Analysis on the development and policy of solar PV power in China , 2013 .

[246]  Cherie R. Kagan,et al.  Engineering charge injection and charge transport for high performance PbSe nanocrystal thin film devices and circuits. , 2014, Nano letters.

[247]  M. Rümmeli,et al.  Ultraflexible and Lightweight Bamboo-Derived Transparent Electrodes for Perovskite Solar Cells. , 2019, Small.

[248]  Brian Norton,et al.  Interior colour rendering of daylight transmitted through a suspended particle device switchable glazing , 2017 .

[249]  S. Sundaram,et al.  Performance of WO3-Incorporated Carbon Electrodes for Ambient Mesoscopic Perovskite Solar Cells , 2019, ACS omega.

[250]  O. Polat,et al.  Li doped ZnO based DSSC: Characterization and preparation of nanopowders and electrical performance of its DSSC , 2020 .

[251]  Do Yeon Kim,et al.  Graphene–titania films by supersonic kinetic spraying for enhanced performance of dye-sensitized solar cells , 2014 .

[252]  E. Cuce.  Toward multi-functional PV glazing technologies in low/zero carbon buildings: Heat insulation solar glass - Latest developments and future prospects , 2016 .

[253]  Nallapaneni Manoj Kumar,et al.  Solar irradiance forecasting and energy optimization for achieving nearly net zero energy building , 2018 .

[254]  Xiaohang Chen,et al.  Tuning the Surface Morphologies and Properties of ZnO Films by the Design of Interfacial Layer , 2017, Nanoscale Research Letters.

[255]  Walid R. Issa,et al.  Performance assessment of cadmium telluride-based semi-transparent glazing for power saving in façade buildings , 2020 .

[256]  Francesco Martellotta,et al.  Improving energy and visual performance in offices using building integrated perovskite-based solar cells: A case study in Southern Italy , 2017 .

[257]  Jean-Louis Scartezzini,et al.  Coloured coatings for glazing of active solar thermal façades by reactive magnetron sputtering , 2011 .

[258]  Jianyong Ouyang,et al.  Transparent conductive oxide-free perovskite solar cells with PEDOT:PSS as transparent electrode. , 2015, ACS applied materials & interfaces.

[259]  S. M. Babu,et al.  Third-Generation Solar Cells: Concept, Materials and Performance - An Overview , 2019, Environmental Chemistry for a Sustainable World.

[260]  Effect of Hydroquinone Dderivatives in Electrolytes on Dye-Sensitized Solar Cell Performance , 2014 .

[261]  Tin-Tai Chow,et al.  Potential application of “see-through” solar cells in ventilated glazing in Hong Kong , 2009 .

[262]  Zhiqiang John Zhai,et al.  Design of optimal building envelopes with integrated photovoltaics , 2015 .

[263]  T. Edvinsson,et al.  Low-Temperature Nb-Doped SnO2 Electron-Selective Contact Yields over 20% Efficiency in Planar Perovskite Solar Cells , 2018 .

[264]  Hongxing Yang,et al.  Thermal behavior of a novel type see-through glazing system with integrated PV cells , 2009 .

[265]  Francesco Martellotta,et al.  Energetic and visual comfort implications of using perovskite-based building-integrated photovoltaic glazings , 2017 .

[266]  Qi Chen,et al.  Planar heterojunction perovskite solar cells via vapor-assisted solution process. , 2014, Journal of the American Chemical Society.

[267]  X. Gong,et al.  Solution-Processed Polymeric Thin Film as the Transparent Electrode for Flexible Perovskite Solar Cells. , 2020, ACS applied materials & interfaces.

[268]  Surface passivation of titanium dioxide via an electropolymerization method to improve the performance of dye-sensitized solar cells , 2016 .

[269]  Fujun Zhang,et al.  A critical review on semitransparent organic solar cells , 2020 .

[270]  Fujun Zhang,et al.  Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells , 2018 .

[271]  Tomas Matuska,et al.  Influence of increased temperature on energy production of roof integrated PV panels , 2018 .

[272]  Hua Tan,et al.  An A–D–D–A-type non-fullerene small-molecule acceptor with strong near-infrared absorption for high performance polymer solar cells , 2019, Journal of Materials Chemistry C.

[273]  S. Sapra,et al.  Enhanced photovoltaic performance of Y2O3:Ho3+/Yb3+ upconversion nanophosphor based DSSC and investigation of color tunability in Ho3+/Tm3+/Yb3+ tridoped Y2O3 , 2020 .

[274]  X. Hou,et al.  A nanostructure-based counter electrode for dye-sensitized solar cells by assembly of silver nanoparticles , 2014 .

[275]  Wansun Kim,et al.  Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms , 2020 .

[276]  G. Gigli,et al.  Polymeric rheology modifier allows single-step coating of perovskite ink for highly efficient and stable solar cells , 2018, Nano Energy.

[277]  A. Pandikumar,et al.  Dye Sensitized Solar Cell: A Summary , 2013 .