Physical and electrochemical characterization of catalysts for oxygen reduction in fuel cells

[1]  Mathias Schulze,et al.  Combined electrochemical and surface analysis investigation of degradation processes in polymer electrolyte membrane fuel cells , 2007 .

[2]  Y. Rosenberg,et al.  Pt-, PtNi- and PtCo-supported catalysts for oxygen reduction in PEM fuel cells , 2006 .

[3]  Ermete Antolini,et al.  The stability of Pt–M (M = first row transition metal) alloy catalysts and its effect on the activity in low temperature fuel cells: A literature review and tests on a Pt–Co catalyst , 2006 .

[4]  N. Alonso‐Vante.  Carbonyl Tailored Electrocatalysts , 2006 .

[5]  Héctor R. Colón-Mercado,et al.  Stability of platinum based alloy cathode catalysts in PEM fuel cells , 2006 .

[6]  H. Tributsch,et al.  Oxygen reduction at carbon supported ruthenium-selenium catalysts: Selenium as promoter and stabilizer of catalytic activity , 2006 .

[7]  Mathias Schulze,et al.  XPS investigation of the PTFE induced hydrophobic properties of electrodes for low temperature fuel cells , 2005 .

[8]  U. Stimming,et al.  The influence of carbon support porosity on the activity of PtRu/Sibunit anode catalysts for methanol oxidation , 2005 .

[9]  Ping Yu,et al.  PtCo/C cathode catalyst for improved durability in PEMFCs , 2005 .

[10]  B. Popov,et al.  Durability study of Pt3Ni1 catalysts as cathode in PEM fuel cells , 2004 .

[11]  Mathias Schulze,et al.  Alteration of the distribution of the platinum catalyst in membrane-electrode assemblies during PEFC operation , 2004 .

[12]  Mathias Schulze,et al.  Long term investigations of silver cathodes for alkaline fuel cells , 2004 .

[13]  Erich Gülzow,et al.  Fully automatic test facilities for the characterisation of DMFC and PEFC MEAs , 2003 .

[14]  M. Schulze,et al.  Characterization of Catalysts for Low Temperature Fuel Cells with Chemisorption, Temperature Programmed Reduction and Oxidation Measurements , 2003 .

[15]  U. Stimming,et al.  Catalysts for Direct Methanol Fuel Cells , 2002 .

[16]  P. Ross,et al.  Surface science studies of model fuel cell electrocatalysts , 2002 .

[17]  B. Rambabu,et al.  A study of methanol electro-oxidation reactions in carbon membrane electrodes and structural properties of Pt alloy electro-catalysts by EXAFS , 2000 .

[18]  Mathias Schulze,et al.  Dry layer preparation and characterisation of polymer electrolyte fuel cell components , 2000 .

[19]  Mathias Schulze,et al.  New dry preparation technique for membrane electrode assemblies for PEM fuel cells , 1999 .

[20]  E. Oldfield,et al.  Cyclic voltammetry and 195Pt nuclear magnetic resonance characterization of graphite-supported commercial fuel cell grade platinum electrocatalysts , 1998 .

[21]  V. Antonucci,et al.  Morphological variation of platinum catalysts in phosphotungstic acid fuel cell , 1998 .

[22]  A. Helmbold,et al.  Innovative production technique for PEFC electrodes , 1996 .

[23]  Günther G. Scherer,et al.  Study of radiation-grafted FEP-G-polystyrene membranes as polymer electrolytes in fuel cells , 1995 .

[24]  E. Bauer.  G. Ertl, J. Küppers: Low energy electrons and surface chemistry, second, completely revised edition, VCH Verlagsgesellschaft, Weinheim 1985. 374 Seiten, Preis: DM 168,-/$ 75.00 , 1987 .

[25]  K. F. Blurton,et al.  Surface area loss of platinum supported on graphite , 1978 .

[26]  A. Vijh,et al.  From Electrocatalysis to Fuel Cells , 1973 .

[27]  S. J. Gregg,et al.  Adsorption Surface Area and Porosity , 1967 .