Functionalized methanofullerenes used as n-type materials in bulk-heterojunction polymer solar cells and in field-effect transistors.

The synthesis of two well-solubilized [60]methanofullerene derivatives ( p- EHO-PCBM and p- EHO-PCBA) is presented for usage in organic solar cells and in field-effect transistors. The para position of the PCBM's phenyl ring was substituted with a branched alkoxy side chain, which contributes to higher solubility, facilitating synthesis, purification, and processing. We find a small change of the open-circuit voltage ( V oc) as a slight improvement in performance upon application in P3HT/[60]methanofullerene bulk-heterojunction-photovoltaic cells, when compared to PCBM, because of the electron donation of the alkoxy group. In the case of the devices with a TiO x layer, the best power conversion efficiencies (PCE, eta e) is observed in a layered structure of P3HT/ p- EHO-PCBA/TiO x (eta e = 2.6%), which slightly exceeds that of P3HT/PCBM/TiO x (eta e = 2.3%) under conditions reported here. This can be attributed, in part, to the carboxylic acid group in p- EHO-PCBA that leads to an effective interface interaction between the active layer and TiO x phase. In addition, n-channel organic field-effect transistor (OFET) devices were fabricated with thin films of p- EHO-PCBM and p- EHO-PCBA, respectively cast from solution on SiO 2/Si substrates. The values of field-effect mobility (mu) for p- EHO-PCBM and p- EHO-PCBA are 1 x 10 (-2) and 1.6 x 10 (-3) cm (2)/V.s, respectively. The results in this paper demonstrate the effects of a carboxylic acid group and an electron-donating substituent in [60]methanofullerenes as n-type materials with respect to organic solar cells and OFET applications.

[1]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[2]  W. Takashima,et al.  Ambipolar Transport in Field-Effect Transistors Based on Composite Films of Poly(3-hexylthiophene) and Fullerene Derivative , 2007 .

[3]  Jan C Hummelen,et al.  Increasing the open circuit voltage of bulk-heterojunction solar cells by raising the LUMO level of the acceptor. , 2007, Organic letters.

[4]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[5]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[6]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[7]  Michael Grätzel,et al.  Solar energy conversion by dye-sensitized photovoltaic cells. , 2005, Inorganic chemistry.

[8]  Kohshin Takahashi,et al.  Relation between carrier mobility and cell performance in bulk heterojunction solar cells consisting of soluble polythiophene and fullerene derivatives , 2005 .

[9]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[10]  Oliver Ambacher,et al.  Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): Fullerene , 2005 .

[11]  J. Fréchet,et al.  Polythiophene containing thermally removable solubilizing groups enhances the interface and the performance of polymer-titania hybrid solar cells. , 2004, Journal of the American Chemical Society.

[12]  Paul A. van Hal,et al.  Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells. , 2003, Angewandte Chemie.

[13]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[14]  Giovanni Ridolfi,et al.  The Effect of a Mild Thermal Treatment on the Performance of Poly(3‐alkylthiophene)/Fullerene Solar Cells , 2002 .

[15]  H. Shim,et al.  Synthesis and properties of new electroluminescent polymers possessing both hole and electron-transporting units in the main chain , 2002 .

[16]  C. Brabec,et al.  Origin of the Open Circuit Voltage of Plastic Solar Cells , 2001 .

[17]  R. Haddon.  C70 THIN FILM TRANSISTORS , 1996 .

[18]  Robert C. Haddon,et al.  C60 thin film transistors , 1995 .

[19]  Jie Yao,et al.  Preparation and Characterization of Fulleroid and Methanofullerene Derivatives , 1995 .

[20]  Y. Maruyama,et al.  Redox properties of organofullerenes , 1994 .

[21]  R C Haddon,et al.  Chemistry of the Fullerenes: The Manifestation of Strain in a Class of Continuous Aromatic Molecules , 1993, Science.

[22]  C. Anderson.  AZT patent. Court favors drug 'concept' over proof. , 1993, Science.

[23]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[24]  S. Punchihewa,et al.  Surface complexation of colloidal semiconductors strongly enhances interfacial electron-transfer rates , 1991 .

[25]  M. Knipper,et al.  University of Groningen Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells Chirvase, , 2003 .

[26]  heterojunctions,et al.  Polymer photovoltaic cells - enhanced efficiencies via a network of internal donor-acceptor heterojunctions , 2001 .

[27]  N. S. Sariciftci,et al.  Photoinduced electron transfer from pi-conjugated polymers onto Buckminsterfullerene, fulleroids and methanofullerenes , 1995 .

[28]  A. Hirsch,et al.  Water-soluble malonic acid derivatives of C60 with a defined three-dimensional structure , 1994 .