Microstructure evolution and mechanical properties of TiAl binary alloys added with SiC fibers

[1]  G. Fan,et al.  Strain partitioning behavior of in situ Ti5Si3/TiAl composites , 2018 .

[2]  You-wen Yang,et al.  Effect of solution and aging treatment on the microstructure and tensile properties of SiCf/C/Mo/Ti2AlNb composites , 2018 .

[3]  Yuyong Chen,et al.  Microstructure evolution and tensile properties of conventional cast TiAl-based alloy with trace Ni addition , 2018 .

[4]  Yuman Zhu,et al.  {101¯1} Twin boundary structures in a Mg–Gd alloy , 2018 .

[5]  Yuyong Chen,et al.  Effects of carbon and boron addition on microstructure and mechanical properties of TiAl alloys , 2017 .

[6]  C. Kenel,et al.  Mechanical performance and oxidation resistance of an ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing , 2017 .

[7]  J. Lapin,et al.  Microstructure and mechanical properties of cast in-situ TiAl matrix composites reinforced with (Ti,Nb)2AlC particles , 2017 .

[8]  Jing Zhu,et al.  Structural stability and the alloying effect of TiB polymorphs in TiAl alloys , 2017 .

[9]  Ruirun Chen,et al.  Variations of microstructure and tensile property of γ-TiAl alloys with 0–0.5 at% C additives , 2017 .

[10]  Ruirun Chen,et al.  Influence of high-temperature hydrogen charging on microstructure and hot deformability of binary TiAl alloys , 2017 .

[11]  Ruirun Chen,et al.  Formation of TiC/Ti2AlC and α2+γ in in-situ TiAl composites with different solidification paths , 2017 .

[12]  R. Hu,et al.  Understanding the role of carbon atoms on microstructure and phase transformation of high Nb containing TiAl alloys , 2017 .

[13]  H. Cui,et al.  Effect of carbon reactant on microstructures and mechanical properties of TiAl/Ti2AlC composites , 2017 .

[14]  P. An,et al.  Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment , 2017 .

[15]  R. Hu,et al.  Tensile properties and fracture behavior of in-situ synthesized Ti2AlN/Ti48Al2Cr2Nb composites at room and elevated temperatures , 2017 .

[16]  L. Geng,et al.  Fabrication of in situ Ti5Si3/TiAl composites with controlled quasi-network architecture using reactive infiltration , 2016 .

[17]  Ruirun Chen,et al.  Comparison of microstructures and mechanical properties of as-cast and directionally solidified Ti-47Al-1W-0.5Si alloy , 2016 .

[18]  Y. Jiao,et al.  Effects of Ti5Si3 characteristics adjustment on microstructure and tensile properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites with two-scale network architecture , 2016 .

[19]  H. Cui,et al.  Lamellar structure and effect of Ti2AlC on properties of prepared in-situ TiAl matrix composites , 2016 .

[20]  H. Clemens,et al.  Modeling concepts for intermetallic titanium aluminides , 2016 .

[21]  T. Kruml,et al.  Mechanical properties of high niobium TiAl alloys doped with Mo and C , 2016 .

[22]  Ruirun Chen,et al.  Influence of thermal stabilization treatment on microstructure evolution of the mushy zone and subsequent directional solidification in Ti-43Al-3Si alloy , 2016 .

[23]  Chenhui Yang,et al.  Effect of MoO3 on microstructure and mechanical properties of (Ti,Mo)Al/Al2O3 composites by in situ reactive hot pressing , 2016 .

[24]  A. Twardowska,et al.  Lattice dynamics of binary and ternary phases in Ti–Si–C system: A combined Raman spectroscopy and density functional theory study , 2015 .

[25]  Y. Jiao,et al.  In Situ Synthesis of (TiC + Ti3SiC2 + Ti5Si3)/Ti6Al4V Composites with Tailored Two‐scale Architecture , 2015 .

[26]  L. Geng,et al.  Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal? , 2015 .

[27]  J. Lewandowski,et al.  Effects of test orientation on fracture and fatigue crack growth behavior of third generation as-cast Ti–48Al–2Nb–2Cr , 2015 .

[28]  Peng Zhang,et al.  The microstructure and tensile properties of the Ti2AlC reinforced TiAl composites fabricated by powder metallurgy , 2014 .

[29]  G. Fan,et al.  Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system , 2013 .

[30]  W. Zhang,et al.  Investigation of interfacial reaction in SiC fiber reinforced Ti–43Al–9V composites , 2013 .

[31]  F. Qiu,et al.  Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles , 2013 .

[32]  F. Qiu,et al.  Study of effect of Mn addition on the mechanical properties of Ti2AlC/TiAl composites through first principles study and experimental investigation , 2012 .

[33]  L. Geng,et al.  Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ TiBw/Ti composites , 2012 .

[34]  F. Qiu,et al.  Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction , 2012 .

[35]  Yanchun Zhou,et al.  Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review , 2010 .

[36]  F. Schimansky,et al.  High carbon solubility in a γ-TiAl-based Ti–45Al–5Nb–0.5C alloy and its effect on hardening , 2009 .

[37]  K. P. Rao,et al.  Characterization and mechanical properties of in situ synthesized Ti5Si3/TiAl composites , 2003 .

[38]  Annick Loiseau,et al.  Atom probe study of phase transformations in a Ti–48 at.% Al alloy , 2002 .

[39]  D. G. Morris,et al.  The effect of heat treatments on the microstructural stability of the intermetallic Ti–46.5Al–2W–0.5Si , 2001 .

[40]  A. Menand,et al.  Interstitial solubility in γ and α2 phases of TiAl-based alloys , 1996 .

[41]  R. Mehrabian,et al.  Phase equilibria and solidification in Ti-Al alloys , 1989 .