An Adaptive Measurement System for the Simultaneous Evaluation of Frequency Shift and Series Resistance of QCM in Liquid

In this paper, a novel measurement system based on Quartz Crystal Microbalances is presented. The proposed solution was conceived specifically to overcome the measurement problems related to Quartz Crystal Microbalance (QCM) applications in dielectric liquids where the Q-factor of the resonant system is severely reduced with respect to in-gas applications. The QCM is placed in a Meacham oscillator embedding an amplifier with adjustable gain, an automatic strategy for gain tuning allows for maintaining the oscillator frequency close to the series resonance frequency of the quartz, which is related in a simple way with the physical parameters of interest. The proposed system can be used to monitor simultaneously both the series resonant frequency and the equivalent electromechanical resistance of the quartz. The feasibility and the performance of the proposed method are proven by means of measurements obtained with a prototype based on a 10-MHz AT-cut quartz.

[1]  J. Gordon,et al.  Frequency of a quartz microbalance in contact with liquid , 1985 .

[2]  Craig A. Grimes,et al.  Wireless Magnetoelastic Resonance Sensors: A Critical Review , 2002 .

[3]  Tommaso Addabbo,et al.  Quartz-Crystal Microbalance Gas Sensors Based on TiO2 Nanoparticles , 2018, IEEE Transactions on Instrumentation and Measurement.

[4]  Xianhe Huang,et al.  The Exploration and Confirmation of the Maximum Mass Sensitivity of Quartz Crystal Microbalance , 2018, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[5]  Mohieddine Benammar,et al.  Quartz Crystal Microbalance Electronic Interfacing Systems: A Review , 2017, Sensors.

[6]  Luis Armando Carvajal Ahumada,et al.  Evaluation of Hyaluronic Acid Dilutions at Different Concentrations Using a Quartz Crystal Resonator (QCR) for the Potential Diagnosis of Arthritic Diseases , 2016, Sensors.

[7]  D. Johannsmann,et al.  On the Use of the Quartz Crystal Microbalance for Whole-Cell-Based Biosensing , 2018 .

[8]  P. Labbé,et al.  Functional characterization of starch-degrading enzymes using quartz crystal microbalance with dissipation monitoring (QCM-D) , 2013 .

[9]  Andreas Dietzel,et al.  Low-cost, in-liquid measuring system using a novel compact oscillation circuit and quartz-crystal microbalances (QCMs) as a versatile biosensor platform , 2017 .

[10]  T. Sogorb,et al.  An extended Butterworth Van Dyke model for quartz crystal microbalance applications in viscoelastic fluid media , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  M. Radomski,et al.  The use of quartz crystal microbalance with dissipation (QCM-D) for studying nanoparticle-induced platelet aggregation , 2012, International journal of nanomedicine.

[12]  Qingxia Liu,et al.  QCM-D study of nanoparticle interactions. , 2016, Advances in colloid and interface science.

[13]  B. Kasemo,et al.  Missing mass effect in biosensor's QCM applications. , 2002, Biosensors & bioelectronics.

[14]  B. Kasemo,et al.  A nanocell for quartz crystal microbalance and quartz crystal microbalance with dissipation-monitoring sensing. , 2009, The Review of scientific instruments.

[15]  Tommaso Addabbo,et al.  An AlN Micromachined Mass Sensor: Modeling and Characterization , 2021, IEEE Transactions on Instrumentation and Measurement.

[16]  Eduardo Fernández,et al.  Sensor Applications of Soft Magnetic Materials Based on Magneto-Impedance, Magneto-Elastic Resonance and Magneto-Electricity , 2014, Sensors.

[17]  Antonio Arnau,et al.  A Review of Interface Electronic Systems for AT-cut Quartz Crystal Microbalance Applications in Liquids , 2008, Sensors.

[18]  Tommaso Addabbo,et al.  Conditioning Circuit for Simultaneous Sensing and Actuation in Piezoelectric MEMS Resonators , 2019, 2019 IEEE Sensors Applications Symposium (SAS).

[19]  Xiuming Wang,et al.  Theoretical Derivation and Verification of Liquid Viscosity and Density Measurements Using Quartz Tuning Fork Sensor , 2019, 2019 Symposium on Piezoelectrcity,Acoustic Waves and Device Applications (SPAWDA).

[20]  K V Santhosh,et al.  Non-contact viscosity measurement using sensor fusion techniques , 2017, 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT).

[21]  Senentxu Lanceros-Mendez,et al.  Metallic Glass/PVDF Magnetoelectric Laminates for Resonant Sensors and Actuators: A Review , 2017, Sensors.

[22]  Feng Tan,et al.  Method for Measuring the Properties of Liquid by a Single QCM at Different Temperatures , 2018, 2018 IEEE International Frequency Control Symposium (IFCS).

[23]  A. Piñón-Pazos,et al.  New approach for the QCM sensors characterization , 2014 .

[24]  Viscosity measurements in pulsed magnetic fields by using a quartz-crystal microbalance. , 2019, The Review of scientific instruments.

[25]  L.A. Meacham,et al.  The Bridge-Stabilized Oscillator , 1938, Proceedings of the Institute of Radio Engineers.

[26]  H. Bissig,et al.  Simultaneous measurement of the maximum oscillation amplitude and the transient decay time constant of the QCM reveals stiffness changes of the adlayer , 2003, Analytical and bioanalytical chemistry.