Optimization of a Hexapod Micro Parallel Robot Using Genetic Algorithms

In this paper a mono-objective optimum design procedure for a six-degree of freedom parallel micro robot is outlined by using optimality criterion of workspace and numerical aspects. A mono-objective optimization problem is formulated by referring to a basic performance of parallel robots. Additional objective functions can be used to extend the proposed design procedure to more general but specific design problems. A kinematic optimization was performed to maximize the workspace of the mini parallel robot. Optimization was performed using Genetic Algorithms.

[1]  S.-D. Stan,et al.  Optimal Design of a 2 DOF Micro Parallel Robot Using Genetic Algorithms , 2007, 2007 IEEE International Conference on Integration Technology.

[2]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[3]  K. C. Gupta,et al.  On the Nature of Robot Workspace , 1986 .

[4]  Marco Ceccarelli,et al.  A Synthesis Algorithm for Three-Revolute Manipulators by Using an Algebraic Formulation of Workspace Boundary , 1995 .

[5]  Jan A. Snyman,et al.  A numerical method for the determination of dextrous workspaces of Gough–Stewart platforms , 2001 .

[6]  Joseph Duffy,et al.  Special configurations of spatial mechanisms and robot arms , 1982 .

[7]  Sergiu-Dan Stan,et al.  Multi-objective Design Optimization of Mini Parallel Robots Using Genetic Algorithms , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[8]  Kenneth J. Waldron,et al.  The Workspaces of a Mechanical Manipulator , 1981 .

[9]  Joseph K. Davidson,et al.  Rigid Body Location and Robot Workspaces: Some Alternative Manipulator Forms , 1987 .

[10]  V. Maties,et al.  Optimization of 2 DOF Micro Parallel Robots Using Genetic Algorithms , 2007, 2007 IEEE International Conference on Mechatronics.

[11]  C. Gosselin.  Determination of the Workspace of 6-DOF Parallel Manipulators , 1990 .

[12]  Tatsuo Arai,et al.  A prototype parallel manipulator: kinematics, construction, software, workspace results, and singularity analysis , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[13]  Jean-Pierre Merlet,et al.  Determination of the orientation workspace of parallel manipulators , 1995, J. Intell. Robotic Syst..

[14]  S. Stan,et al.  Workspace optimization of a two degree of freedom mini parallel robot , 2006, 2006 IEEE International Conference on Automation, Quality and Testing, Robotics.

[15]  Carlo Ferraresi,et al.  Workspace and dexterity evaluation of 6 d.o.f. spatial mechanisms , 1995 .

[16]  Pavel Petrovic.  Evolving Behavior Coordination for Mobile Robots Using Distributed Finite-State Automata , 2008 .

[17]  John H. Holland,et al.  Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence , 1992 .

[18]  Marco Ceccarelli,et al.  Fundamentals of Mechanics of Robotic Manipulation , 2004, Mechanisms and Machine Science.

[19]  S. Agrawal.  Workspace boundaries of in-parallel manipulator systems , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[20]  Ying-Chien Tsai,et al.  Accessible Region and Synthesis of Robot Arms , 1981 .

[21]  K. C. Gupta,et al.  Design Considerations for Manipulator Workspace , 1982 .

[22]  J. Duffy,et al.  An Optimization Approach to the Determination of the Boundaries of Manipulator Workspaces , 2000 .

[23]  G. Gogu.  Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations , 2004 .

[24]  Jian Wang,et al.  Workspace evaluation of Stewart platforms , 1994, Adv. Robotics.