Fault-tolerant model predictive control of a direct methanol-fuel cell system with actuator faults

Abstract This paper investigates fault tolerant model predictive control (MPC) of a direct methanol fuel cell (DMFC) system with several faults in the methanol feeding pump. An active FTMPC strategy with a hierarchal structural design is developed. The focus here is on fault detection and isolation (FDI) and the implementation of fault-tolerant strategies within the control algorithm. To this end, a model-based FDI scheme with virtual sensors is first developed by means of the real-time diagnosis of fault occurrence during operation. Thereby, several faults in the methanol pump are characterized and the information integrated into the MPC algorithm in each fault case. Strategies are presented to reconfigure the active fault-tolerant MPC to keep the DMFC system stable in case of a feeding failure. Moreover, economic, stability and lifetime characteristics are also integrated into the active fault-tolerant MPC. The proposed FDI and FTMPC scheme is tested experimentally in a DMFC test rig with a 5-cell DMFC stack to demonstrate the effectiveness and robustness of the designed approach. Several fault scenarios with the FTMPC are shown. Particularly in the case of fuel cells, fault tolerance is necessary to meet the goals of long-lasting system stability and efficiency.

[1]  Zhang Mingbo,et al.  Fuzzy controller with increment output mode for SCM system , 2011, 2011 International Conference on Electric Information and Control Engineering.

[2]  Prashant Mhaskar,et al.  Lyapunov-based model predictive control of stochastic nonlinear systems , 2012, Autom..

[3]  Vicenç Puig,et al.  Fault-Tolerant MPC Control of PEM Fuel Cells , 2008 .

[4]  Gang Feng,et al.  Quasi-min-max fuzzy model predictive control of direct methanol fuel cells , 2014, Fuzzy Sets Syst..

[5]  E. Badreddin,et al.  Application of model predictive control for fault tolerant system using dynamic safety margin , 2006, 2006 American Control Conference.

[6]  Jan M. Maciejowski,et al.  Modelling and predictive control: Enabling technologies for reconfiguration , 1999 .

[7]  B. Ould Bouamama,et al.  Fault detection and isolation of PEM fuel cell system based on nonlinear analytical redundancy: An application via parity space approach , 2011 .

[8]  Ulrike Krewer,et al.  Model predictive control of a hybrid fuel cell & battery power system , 2012 .

[9]  Olivier Bethoux,et al.  Fault detection and identification using simple and non-intrusive on-line monitoring techniques for PEM fuel cell , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[10]  Mohammad Javad Khosrowjerdi,et al.  Active Fault Tolerant Controller Design using Model Predictive Control , 2015 .

[11]  Ulrike Krewer,et al.  Modelling, dynamics and control of a portable DMFC system , 2010 .

[12]  Lin Li,et al.  FAULT-TOLERANT CONTROL FOR CONSTRAINED LINEAR SYSTEMS BASED ON MPC AND FDI , 2008 .

[13]  Cédric Damour,et al.  Fault Tolerant Control Strategy applied to PEMFC water management , 2015 .

[14]  Dong Huang,et al.  Fuzzy Sliding Mode Control for a Fuel Cell System , 2013 .

[15]  Hiroya Seki,et al.  Nonlinear Model Predictive Control Using Successive Linearization , 2002 .

[16]  Ludger Blum,et al.  Hybridization and Control of Direct Methanol Fuel Cell Systems for Material Handling Applications , 2010 .

[17]  Damiano Rotondo,et al.  Fault Tolerant Control of a PEM Fuel Cell using qLPV Virtual Actuators , 2015 .

[18]  Prashant Mhaskar,et al.  Offset-free model predictive controller of a heat pump , 2014, 2014 American Control Conference.

[19]  Rudibert King,et al.  Comparison of two nonlinear model predictive control methods and implementation on a laboratory three tank system , 2011, IEEE Conference on Decision and Control and European Control Conference.