Circuit Modelling and Eigenfrequency Analysis of a Poly-Si Based RF MEMS Switch Designed and Modelled for IEEE 802.11ad Protocol

This paper presents the equivalent circuit modelling and eigenfrequency analysis of a wideband robust capacitive radio frequency (RF) microelectromechanical system (MEMS) switch that was designed using Poly-Si and Au layer membrane for highly reliable switching operation. The circuit characterization includes the extraction of resistance, inductance, on and off state capacitance, and Q-factor. The first six eigenfrequencies are analyzed using a finite element modeler, and the equivalent modes are demonstrated. The switch is optimized for millimeter wave frequencies, which indicate excellent RF performance with isolation of more than 55 dB and a low insertion loss of 0.1 dB in the V-band. The designed switch actuates at 13.2 V. The R, L, C and Q-factor are simulated using Y-matrix data over a frequency sweep of 20–100 GHz. The proposed switch has various applications in satellite communication networks and can also be used for devices that will incorporate the upcoming IEEE Wi-Fi 802.11ad protocol. Category: Smart and intelligent computing

[1]  Gabriel M. Rebeiz,et al.  RF MEMS switches and switch circuits , 2001 .

[2]  Sung-Bong Yang,et al.  A Direction Entropy-Based Forwarding Scheme in an Opportunistic Network , 2014, J. Comput. Sci. Eng..

[3]  Hyokyung Bahn,et al.  Page Replacement for Write References in NAND Flash Based Virtual Memory Systems , 2014, J. Comput. Sci. Eng..

[4]  R. L. Edwards,et al.  Measurements of Young's modulus, Poisson's ratio, and tensile strength of polysilicon , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[5]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .

[6]  M. Mehregany,et al.  Contact physics of gold microcontacts for MEMS switches , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).

[7]  C. Nguyen,et al.  Micromechanical electrostatic K-band switches , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[8]  Gabriel M. Rebeiz,et al.  W-band CPW RF MEMS circuits on quartz substrates , 2003 .

[9]  Tejinder Singh,et al.  High Isolation Single-Pole Four-Throw RF MEMS Switch Based on Series-Shunt Configuration , 2014, TheScientificWorldJournal.

[10]  Jin-Koo Rhee,et al.  An RF-MEMS Switch With Low-Actuation Voltage and High Reliability , 2006, Journal of Microelectromechanical Systems.

[11]  C. Goldsmith,et al.  Robustness of RF MEMS Capacitive Switches With Molybdenum Membranes , 2009, IEEE Transactions on Microwave Theory and Techniques.

[12]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 1. Modeling , 2000 .

[13]  Tejinder Singh,et al.  Effective Stress Modeling of Membranes Made of Gold and Aluminum Materials Used in Radio-Frequency Microelectromechanical System Switches , 2013 .

[14]  K. Sarabandi,et al.  MEMS devices for high isolation switching and tunable filtering , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[15]  Milton Feng,et al.  Rf' Mem Switches I . Introduciion , 2004 .

[16]  S. Snelgrove,et al.  Medication Monitoring for People with Dementia in Care Homes: The Feasibility and Clinical Impact of Nurse-Led Monitoring , 2014, TheScientificWorldJournal.