Thermoelectric Properties of Rare Earth-doped SrTiO3 Using Combination of Combustion Synthesis (CS) and Spark Plasma Sintering (SPS)

Thermoelectric properties of combustion synthesized and spark plasma sintered rare-earth-doped (La, Sm, Gd, Dy and Y) SrTiO3 was investigated from room temperature to 870 K from viewpoint of energy and time saving without deterioration in thermoelectric properties. All single phases of rare-earth-doped SrTiO3 were successfully synthesized and sintered with high densities. With temperature increasing, the absolute value of Seebeck coefficient of all the samples increased and the electric conductivity decreased; the power factor of all the samples decreased except Y-doped sample in the considering temperature range. In all the samples, the La-doped sample and the Y-doped sample had the highest and lowest power factor, respectively. The figure of merit of La-doped samples with different doping amounts was evaluated and the maximum figure of merit 0.22 was obtained at 800 K from Sr0.92La0.08TiO3 sample. Comparing Y and La-doped samples prepared by our synthesis method with that of conventional solid-state reaction method, the thermoelectric properties of our samples were relatively higher. Thus the combination of combustion synthesis and spark plasma sintering has a potential to prepare perovskite-oxide materials with relatively higher thermoelectric properties for high-temperature application.

[1]  T. Akiyama,et al.  Combustion synthesis of SrTiO3 using different raw materials , 2008 .

[2]  H. Ohta,et al.  Large thermoelectric performance of heavily Nb-doped SrTiO3 epitaxial film at high temperature , 2005 .

[3]  S. Yamanaka,et al.  Thermoelectric properties of reduced and La-doped single-crystalline SrTiO3 , 2005 .

[4]  S. Yamanaka,et al.  Thermoelectric properties of perovskite type strontium ruthenium oxide , 2005 .

[5]  H. Ohta,et al.  High-temperature carrier transport and thermoelectric properties of heavily La- or Nb-doped SrTiO3 single crystals , 2005 .

[6]  S. Yamanaka,et al.  Thermoelectric properties of doped BaTiO3-SrTiO3 solid solution , 2004 .

[7]  J. Inoue,et al.  Magnetoresistance in Ferromagnet/Semimetal/Ferromagnet Junctions , 2004 .

[8]  S. Yamanaka,et al.  Thermoelectric properties of rare earth doped SrTiO3 , 2003 .

[9]  T. Okuda,et al.  Large thermoelectric response of metallic perovskites: Sr 1 − x La x TiO 3 ( 0 x 0 . 1 ) , 2001 .

[10]  D. Luss,et al.  A new route to synthesize La1−xSrxMnO3 , 2000 .

[11]  H. Beck,et al.  Combustion-synthesis of SrTiO3 Part I. synthesis and properties of the ignition products , 2000 .

[12]  H. Beck,et al.  Combustion-synthesis of SrTiO 3 Part II. Sintering behaviour and surface characterization , 2000 .

[13]  T. Akiyama,et al.  Mathematical model of combustion synthesis , 1998 .

[14]  I. Parkin,et al.  Self-propagating high-temperature synthesis of SrTiO3 and SrxBayTiO3 (x+y=1) , 1996, Journal of Materials Science.

[15]  A. G. Merzhanov,et al.  History and recent developments in SHS , 1995 .

[16]  Arvind Varma,et al.  Combustion synthesis of advanced materials , 1992 .

[17]  Toshio Kimura,et al.  Preparation of rod-shaped BaTiO3 powder , 1986 .