Design and optimization of solid lattice hybrid structures fabricated by additive manufacturing

Abstract Additive Manufacturing (AM) has largely relieved the design freedom of functional parts. Topology optimization has been widely used to design lightweight structures fabricated by AM. In this paper, a general design method is proposed to design solid lattice hybrid structures. An optimization algorithm is used in this method that can generate a functionally graded heterogeneous lattice structure connecting the solid part. The manufacturability can be improved due to the lattice structure supporting the overhangs. The selection of the lattice topology and the generation of the solid-lattice space are explained in detail. A hybrid element model is used to simulate the mechanical performance and optimize the material distribution of the lattice structure. To validate the design theory and the advantage of the hybrid structure, a three-point bending beam is designed by the proposed method and the existing methods. Both the simulation result and the experimental result show that the hybrid structure has a higher stiffness, yield strength, and critical buckling load than the pure solid structure and the pure lattice structure.

[1]  Yaoyao Fiona Zhao,et al.  Lattice Structure Design and Optimization With Additive Manufacturing Constraints , 2018, IEEE Transactions on Automation Science and Engineering.

[2]  Yaoyao Fiona Zhao,et al.  A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing , 2017 .

[3]  David W. Rosen,et al.  A comparison of synthesis methods for cellular structures with application to additive manufacturing , 2010 .

[4]  Chee Kai Chua,et al.  Polymeric composites for powder-based additive manufacturing: Materials and applications , 2019, Progress in Polymer Science.

[5]  Lin Cheng,et al.  Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation , 2017 .

[6]  Y. Xie,et al.  3D and multiple load case bi-directional evolutionary structural optimization (BESO) , 1999 .

[7]  Xun Xu,et al.  Support Structures for Additive Manufacturing: A Review , 2018, Journal of Manufacturing and Materials Processing.

[8]  Yi Min Xie,et al.  Evolutionary structural optimisation (ESO) using a bidirectional algorithm , 1998 .

[9]  G. Labeas,et al.  Elastic modulus and Poisson’s ratio determination of micro-lattice cellular structures by analytical, numerical and homogenisation methods , 2012 .

[10]  Chee Kai Chua,et al.  3D‐Printed Mechanical Metamaterials with High Energy Absorption , 2018, Advanced Materials Technologies.

[11]  Hongqing Vincent Wang,et al.  A Unit Cell Approach for Lightweight Structure and Compliant Mechanism , 2005 .

[12]  Yaoyao Fiona Zhao,et al.  Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing , 2015, Comput. Aided Des..

[13]  Kristina Shea,et al.  The Effect of Anisotropy on the Optimization of Additively Manufactured Lattice Structures , 2017 .

[14]  W. Lu,et al.  Optimisation of functionally graded lattice structures using isostatic lines , 2017 .

[15]  Y. Xie,et al.  Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method , 2007 .

[16]  Yi Min Xie,et al.  Design of lattice structures with controlled anisotropy , 2016 .

[17]  Gregory C. Graf,et al.  Development of specialized base primitives for meso-scale conforming truss structures , 2009 .

[18]  Weihong Zhang,et al.  Concurrent topology optimization design of structures and non-uniform parameterized lattice microstructures , 2018, Structural and Multidisciplinary Optimization.

[19]  David Rosen,et al.  Design of truss-like cellular structures using relative density mapping method , 2015 .

[20]  Eugenio Guglielmelli,et al.  Load-Adaptive Scaffold Architecturing: A Bioinspired Approach to the Design of Porous Additively Manufactured Scaffolds with Optimized Mechanical Properties , 2011, Annals of Biomedical Engineering.

[21]  JiangJingchao,et al.  Support Optimization for Flat Features via Path Planning in Additive Manufacturing , 2019, 3D Printing and Additive Manufacturing.

[22]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[23]  Guoying Dong,et al.  A 149 Line Homogenization Code for Three-Dimensional Cellular Materials Written in matlab , 2018, Journal of Engineering Materials and Technology.

[24]  David W. Rosen,et al.  The Size Matching and Scaling Method: A Synthesis Method for the Design of Mesoscale Cellular Structures , 2010 .

[25]  K. Salonitis,et al.  A hybrid finite element analysis and evolutionary computation method for the design of lightweight lattice components with optimized strut diameter , 2017 .

[26]  Jihong Zhu,et al.  Experimental validation of 3D printed material behaviors and their influence on the structural topology design , 2018 .

[27]  Tino Stanković,et al.  A Generalized Optimality Criteria Method for Optimization of Additively Manufactured Multimaterial Lattice Structures , 2015 .

[28]  I. Ashcroft,et al.  A DITHERING BASED METHOD TO GENERATE VARIABLE VOLUME LATTICE CELLS FOR ADDITIVE MANUFACTURING , 2011 .

[29]  Yaoyao Fiona Zhao,et al.  Simulation of elastic properties of solid-lattice hybrid structures fabricated by additive manufacturing , 2017 .

[30]  Lu Zhou,et al.  Topology optimization of self-supporting structures with polygon features for additive manufacturing , 2018, Computer Methods in Applied Mechanics and Engineering.

[31]  G. Labeas,et al.  Shear Modulus Determination of Cuboid Metallic Open‐Lattice Cellular Structures by Analytical, Numerical and Homogenisation Methods , 2012 .