A temperature-dithering closed-loop interface circuit for a scanning thermal microscopy system

This work presents an interface circuit for low-frequency dithering measurements of resistor-based transducers. It is demonstrated in the context of a polyimide-shank scanning thermal microscopy probe which provides high thermal sensitivity and spatial resolution, but has a low bandwidth from both mechanical and thermal perspectives. These pose challenges in temperature dithering and control, as well as noise immunity. The circuit includes a proportional-integral controller and a demodulator, along with appropriate amplifier and filter blocks. It keeps the average temperature of the probe tip constant while synchronously detecting variations in the second harmonic of the modulated signal as the tip is scanned across the sample surface. Strategic choices in the circuit architecture and topology are evaluated, and the overall system including the sensor and the circuit is simulated. Measurements of the implemented system show that a signal-to-noise ratio (SNR) of 15.7 is achieved while scanning a photoresist sample of 218 nm thickness on a silicon substrate, and that the detection limit for variations in thermal conductance is <3 pW/K.

[1]  Khalil Najafi,et al.  A silicon micromachined scanning thermal profiler with integrated elements for sensing and actuation , 1997 .

[2]  S. K. Murad,et al.  Generic scanned-probe microscope sensors by combined micromachining and electron-beam lithography , 1998 .

[3]  Juan J. de Pablo,et al.  Thermal Probe Measurements of the Glass Transition Temperature for Ultrathin Polymer Films as a Function of Thickness , 2000 .

[4]  Arun Majumdar,et al.  Sensor nanofabrication, performance, and conduction mechanisms in scanning thermal microscopy , 1997 .

[5]  Y. Gianchandani,et al.  Applications of a low contact force polyimide shank bolometer probe for chemical and biological diagnostics , 2003 .

[6]  H. Pollock,et al.  Scanning thermal microscopy: Subsurface imaging, thermal mapping of polymer blends, and localized calorimetry , 1996 .

[7]  Yoshihiko Suzuki.  Novel microcantilever for scanning thermal imaging microscopy , 1996 .

[8]  John M. R. Weaver,et al.  Scanning thermal microscopy using batch fabricated thermocouple probes , 1998 .

[9]  Yogesh B. Gianchandani,et al.  Surface micromachined polyimide scanning thermocouple probes , 2001 .

[10]  E. Oesterschulze,et al.  Imaging of thermal properties and topography by combined scanning thermal and scanning tunneling microscopy , 1996 .

[11]  Dürig,et al.  The “ Millipede ” — More than one thousand tips for future AFM data storage , 2000 .

[12]  E. Oesterschulze,et al.  Micromachined fabrication of Si cantilevers with Schottky diodes integrated in the tip , 1998 .

[13]  L. Balk,et al.  Quantitative thermal conductivity measurements with nanometre resolution , 1999 .

[14]  L. Lu,et al.  3ω method for specific heat and thermal conductivity measurements , 2001, quant-ph/0202038.

[15]  S. Kwun,et al.  The 3ω technique for measuring dynamic specific heat and thermal conductivity of a liquid or solid , 1996 .

[16]  Arun Majumdar,et al.  Thermal imaging by atomic force microscopy using thermocouple cantilever probes , 1995 .

[17]  Clayton C. Williams,et al.  Micromachined submicrometer photodiode for scanning probe microscopy , 1995 .

[18]  Juan J. de Pablo,et al.  Scaling of Tg and reaction rate with film thickness in photoresist: A thermal probe study , 2000 .

[19]  Yogesh B. Gianchandani,et al.  Microcalorimetry applications of a surface micromachined bolometer-type thermal probe , 2000 .

[20]  Joohyung Lee,et al.  A scanning thermal microscopy system with a temperature dithering, servo-controlled interface circuit , 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03..

[21]  Mo Song,et al.  Sub-surface imaging by scanning thermal microscopy , 1996 .

[22]  H. K. Wickramasinghe.  Scanned-probe microscopes , 1989 .

[23]  James K. Gimzewski,et al.  A femtojoule calorimeter using micromechanical sensors , 1994 .

[24]  Leonidas E. Ocola,et al.  Latent image formation: Nanoscale topography and calorimetric measurements in chemically amplified resists , 1996 .

[25]  A. Majumdar.  SCANNING THERMAL MICROSCOPY , 1999, Annual Review of Materials Science.

[26]  Yiying Wu,et al.  Scanning thermal imaging microscopy using composite cantilever probes , 1995 .

[27]  Quantitative thermal probing of devices at sub-100 nm resolution , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).