Structure/processing relationships and mechanical properties of freeze-cast B4C scaffolds with unidirectional channels

[1]  Shu Yan,et al.  Pressureless liquid-phase sintering of B4C with MoSi2 as a sintering aid , 2019, Ceramics International.

[2]  Yuping Zeng,et al.  High porosity Ca-α-SiAlON ceramics with rod-like grains fabricated by freeze casting and pressureless sintering , 2019, Journal of the European Ceramic Society.

[3]  J. Wu,et al.  Design and deformation behaviour of a laminar B4C/Al composite , 2018, Ceramics International.

[4]  Haiyan Du,et al.  Influence of fibers on the microstructure and compressive response of directional ice-templated alumina ceramics , 2018, Journal of the European Ceramic Society.

[5]  D. Ghosh,et al.  Effects of porosity and strain rate on the uniaxial compressive response of ice-templated sintered macroporous alumina , 2018 .

[6]  Z. Zhong,et al.  High toughness and electrical discharge machinable B4C-TiB2-SiC composites fabricated at low sintering temperature , 2017 .

[7]  U. Wegst,et al.  Structure-processing correlations and mechanical properties in freeze-cast Ti-6Al-4V with highly aligned porosity and a lightweight Ti-6Al-4V-PMMA composite with excellent energy absorption capability , 2017 .

[8]  Q. Shen,et al.  Microstructure and mechanical behavior of AA2024/B4C composites with a network reinforcement architecture , 2017 .

[9]  D. Ghosh,et al.  Influence of anisotropic grains (platelets) on the microstructure and uniaxial compressive response of ice-templated sintered alumina scaffolds , 2017 .

[10]  Tingting Xu,et al.  Effect of two-step sintering on micro-honeycomb BaTiO3 ceramics prepared by freeze-casting process , 2016 .

[11]  Adam J. Stevenson,et al.  Mechanical properties and failure behavior of unidirectional porous ceramics , 2016, Scientific Reports.

[12]  Tingting Xu,et al.  A review of fabrication strategies and applications of porous ceramics prepared by freeze-casting method , 2016 .

[13]  Annett Baier,et al.  Ceramics Industrial Processing And Testing , 2016 .

[14]  R. Ritchie,et al.  Bioinspired Hydroxyapatite/Poly(methyl methacrylate) Composite with a Nacre‐Mimetic Architecture by a Bidirectional Freezing Method , 2016, Advanced materials.

[15]  J. D. Costa,et al.  The influence of Fe2O3 doping on the pore structure and mechanical strength of TiO2-containing alumina obtained by freeze-casting , 2015 .

[16]  R. Ritchie,et al.  Developing strength and toughness in bio-inspired silicon carbide hybrid materials containing a compliant phase , 2015 .

[17]  E. Levänen,et al.  Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting , 2015 .

[18]  Okenwa I. Okoli,et al.  Processing and properties of advanced porous ceramics: An application based review , 2014 .

[19]  X. Xiong,et al.  Effects of heat treatment on phase contents and mechanical properties of infiltrated B4C/2024Al composites , 2014 .

[20]  A. Ragauskas,et al.  Preparation and characteristics of cellulose nanowhisker reinforced acrylic foams synthesized by freeze-casting , 2014 .

[21]  Chang‐an Wang,et al.  A novel way to fabricate tubular porous mullite membrane supports by TBA-based freezing casting method , 2013 .

[22]  R. Ritchie,et al.  On the development of ice-templated silicon carbide scaffolds for nature-inspired structural materials , 2013 .

[23]  T. Button,et al.  The effect of particle size in freeze casting of porous alumina–zirconia composite , 2013 .

[24]  M. Scheel,et al.  Time-lapse, three-dimensional in situ imaging of ice crystal growth in a colloidal silica suspension , 2013, 1805.05415.

[25]  Yujun Zhang,et al.  Fabrication, microstructure and mechanical behavior of SiCw-B4C–Si composite , 2012 .

[26]  F. Oliveira,et al.  Microstructure and mechanical properties of multi-carbides/(Al, Si) composites derived from porous B4C preforms by reactive melt infiltration , 2012 .

[27]  Yuping Zeng,et al.  Microstructure and mechanical properties of porous Si3N4 ceramics prepared by freeze-casting , 2012 .

[28]  R. Oberacker,et al.  Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities , 2011 .

[29]  Yong Huang,et al.  Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures , 2010 .

[30]  Haijiao Zhang,et al.  Densification and Mechanical Properties of Spark Plasma Sintered B4C with Si as a Sintering Aid , 2010 .

[31]  Ulrike G K Wegst,et al.  Biomaterials by freeze casting , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[32]  Yumin Zhang,et al.  Fabrication of Ceramics with Complex Porous Structures by the Impregnate–Freeze‐Casting Process , 2009 .

[33]  Eduardo Saiz,et al.  Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating , 2009, 1710.04095.

[34]  R. Ritchie,et al.  Tough, Bio-Inspired Hybrid Materials , 2008, Science.

[35]  Sylvain Deville,et al.  Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues , 2008, 1710.04201.

[36]  Eduardo Saiz,et al.  Ice-templated porous alumina structures , 2007, 1710.04651.

[37]  Eduardo Saiz,et al.  Freezing as a Path to Build Complex Composites , 2006, Science.

[38]  Andrew I. Cooper,et al.  Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles , 2005, Nature materials.

[39]  A. Bandyopadhyay,et al.  Strength Degradation of Nonrandom Porous Ceramic Structures under Uniaxial Compressive Loading , 2004 .

[40]  Shinhoo Kang,et al.  Advances in Manufacturing Boron Carbide‐Aluminum Composites , 2004 .

[41]  S. Kang,et al.  Low-temperature processing of B 4CAl composites via infiltration technique , 2001 .

[42]  Dean‐Mo Liu.  Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic , 1997 .

[43]  Michael F. Ashby,et al.  The out-of-plane properties of honeycombs , 1992 .

[44]  D. J. Green,et al.  The effect of cell size on the mechanical behavior of cellular materials , 1990 .

[45]  S. Murthy,et al.  Elastic properties of boron carbide , 1985 .

[46]  Michael F. Ashby,et al.  The mechanical properties of cellular solids , 1983 .