Microcontroller-based portable instrument for stabilised optical oxygen sensor

Abstract A novel measurement system comprised of a portable electronic instrument with an opto-chemical sensor for atmospheric oxygen sensing is presented. Optical sensors based on luminescence quenching have been thoroughly investigated in the search for sufficient sensitivity and high stability. The dye platinum octaethylporphyrin complex immobilised in a polystyrene membrane was selected as an oxygen probe that was stabilised with the heterocyclic amine DABCO, achieving in this way a mean drift of 0.01% oxygen concentration per day. The portable instrument is based on a microcontroller. Its main features are: a single optical sensor channel, lack of optical filters, fully digital signal processing, autonomous operation with computer communication capability for reprogramming and data saving and low power consumption. The use of a digital output photodetector makes it possible to avoid analogue processing with the consequent circuitry saving and better noise immunity. The measured parameter in the transduction process is quite similar to the luminescence lifetime. The typical measurement range is from 0 to 30% oxygen and the response time is below 30 s for full range swing. Typical instrument characteristics are temperature effect correction, low drift and an accuracy of 0.5% in oxygen concentration for the collective calibration curve. Better accuracy can be obtained with individual sensor calibration. Dimensions and weight are 110 mm × 66 mm × 28 mm and 95 g (without battery), respectively. Powering it with a standard 9 V PP3 battery for more than 10 days of operation is possible.

[1]  P. Hauser,et al.  A solid-state instrument for fluorescence chemical sensors using a blue light-emitting diode of high intensity , 1995 .

[2]  A. Lepre,et al.  Controlling the Response Characteristics of Luminescent Porphyrin Plastic Film Sensors for Oxygen , 1997 .

[3]  A. Neal Watkins,et al.  Portable, Low-Cost, Solid-State Luminescence-Based O2 Sensor , 1998 .

[4]  S. Garner,et al.  Photostability of High μβ Electro-Optic Chromophores at 1550 nm† , 2004 .

[5]  Ingo Klimant,et al.  Recent progress in optical oxygen sensor instrumentation , 1995 .

[6]  James N. Demas,et al.  Determination of oxygen concentrations by luminescence quenching of a polymer-immobilized transition-metal complex , 1987 .

[7]  Wolfgang Trettnak,et al.  Miniaturized luminescence lifetime-based oxygen sensor instrumentation utilizing a phase modulation technique , 1996 .

[8]  T. Miyashita,et al.  Optical oxygen detection based on luminescence change of metalloporphyrins immobilized in poly(isobutylmethacrylate-co-trifluoroethylmethacrylate) film , 2000 .

[9]  Prabir K. Dutta,et al.  Oxygen sensors: Materials, methods, designs and applications , 2003 .

[10]  A. Mills.  Effect of plasticizer viscosity on the sensitivity of an [Ru(bpy)32+(Ph4B–)2]-based optical oxygen sensor , 1998 .

[11]  Gely V. Ponomarev,et al.  Towards an optoelectronic luminescent sensing device , 1994, Other Conferences.

[12]  B. M. Monroe.  Quenching of singlet oxygen by aliphatic amines , 1977 .

[13]  W. Seitz,et al.  Luminescence ratio indicators for oxygen , 1987 .

[14]  T. Miyashita,et al.  Novel optical oxygen sensing material: platinum octaethylporphyrin immobilized in a copolymer film of isobutyl methacrylate and tetrafluoropropyl methacrylate , 2001 .

[15]  J. Peterson,et al.  Fiber-optic probe for in vivo measurement of oxygen partial pressure. , 1984, Analytical chemistry.

[16]  J. Aylott,et al.  A real-time ratiometric method for the determination of molecular oxygen inside living cells using sol-gel-based spherical optical nanosensors with applications to rat C6 glioma. , 2001, Analytical chemistry.

[17]  Wenying Xu,et al.  Modeling of Luminescence Quenching-Based Sensors: Comparison of Multisite and Nonlinear Gas Solubility Models , 1995 .

[18]  Dan Xiao,et al.  A hand-held optical sensor for dissolved oxygen measurement , 2003 .

[19]  Benjamin A. DeGraff,et al.  Photophysics and photochemistry of oxygen sensors based on luminescent transition-metal complexes , 1991 .

[20]  Colette McDonagh,et al.  Phase fluorometric dissolved oxygen sensor , 2001 .

[21]  P. Hartmann,et al.  Effects of polymer matrices on calibration functions of luminescent oxygen sensors based on porphyrin ketone complexes. , 1996, Analytical chemistry.

[22]  Paul Hartmann,et al.  Photobleaching of a ruthenium complex in polymers used for oxygen optodes and its inhibition by singlet oxygen quenchers , 1998 .

[23]  L. Capitán-Vallvey,et al.  Single-use phosphorimetric sensor for the determination of nalidixic acid in human urine and milk. , 2000, The Analyst.

[24]  G. Rao,et al.  Ratio measurements in oxygen determinations: wavelength ratiometry, lifetime discrimination, and polarization detection , 2003 .

[25]  K. Seiler,et al.  Theoretical aspects of bulk optode membranes , 1992 .

[26]  Ichiro Okura,et al.  Photoluminescent determination of oxygen using metalloporphyrin-polymer sensing systems , 1998 .

[27]  A. Mills.  Optical sensors for oxygen: a log-gaussian multisite-quenching model , 1998 .

[28]  Gelii V. Ponomarev,et al.  Phosphorescent Complexes of Porphyrin Ketones: Optical Properties and Application to Oxygen Sensing , 1995 .

[29]  Andrew Mills,et al.  Response characteristics of optical sensors for oxygen: a model based on a distribution in τoand kq , 1999 .

[30]  Y. Amao,et al.  Probes and Polymers for Optical Sensing of Oxygen , 2003 .

[31]  Dietmar Kieslinger,et al.  Luminescence lifetime-based sensing: new materials, new devices , 1997 .

[32]  N. H. Martin,et al.  Semi-empirical molecular orbital calculations on the interaction between singlet oxygen and amines : modeling charge transfer quenching , 1997 .

[33]  Luis Fermín Capitán-Vallvey,et al.  Determination of calcium by a single-use optical sensor , 2000 .

[34]  Dmitri B. Papkovsky,et al.  Phosphorescent Sensor Approach for Non-Destructive Measurement of Oxygen in Packaged Foods: Optimisation of Disposable Oxygen Sensors and their Characterization Over a Wide Temperature Range , 2000 .

[35]  Peter Douglas,et al.  Response characteristics of thin film oxygen sensors, Pt and Pd octaethylporphyrins in polymer films , 2002 .