Simple method for measurement of surface roughness using spectral interferometry

The phenomenon that correlation between two beams, in a two-beam interferometer, modifies the spectral characteristics of the light field, is used to estimate the average of the roughness of the surfaces. In the case of intensity interferometer, the path difference between the two arms of the interferometer should be less than the coherence length of the light and the light should be quasi-monochromatic. However, the advantage of spectral interferometer is that the light need not be quasi-monochromatic and the path difference could be much more than the coherence length of light. It is found that more the path difference between the two arms of the interferometer, accurate are the measurements of the roughness of the surfaces. This study shows that spectral interferometry enables one to measure average roughness of the surfaces in the subscales of optical wavelengths.

[1]  Angela Duparré,et al.  Relation between light scattering and the microstructure of optical thin films. , 1993, Applied optics.

[2]  Horst Truckenbrodt,et al.  Roughness and defect characterization of optical surfaces by light-scattering measurements , 1993, Optical Systems Design.

[3]  M. Saillard,et al.  Scattering from metallic and dielectric rough surfaces , 1990 .

[4]  R. Sirohi.  Speckle Metrology , 1993, Optical Methods of Measurement.

[5]  P. Rastogi.  Speckle shearing photography: a tool for direct measurement of surface strains. , 1998, Applied optics.

[6]  C. Wykes,et al.  Holographic and speckle interferometry: Speckle pattern interferometry , 1989 .

[7]  G. Agarwal,et al.  Spectral changes in the Mach–Zehnder interferometer , 1993, OSA Annual Meeting.

[8]  J. S. Vaishya,et al.  Displacement measurements from coherence-induced spectral changes in a Mach-Zehnder interferometer , 1995 .

[9]  Measurements of light scattering by a characterized random rough surface , 1991 .

[10]  J. Bennett,et al.  Surface roughness measurements of low-scatter mirrors and roughness standards. , 1984, Applied optics.

[11]  Rolf E. Hummel,et al.  Thin films for optical coatings , 1995 .

[12]  S. O. Sari,et al.  Study of surface plasma-wave reflectance and roughness-induced scattering in silver foils , 1980 .

[13]  R. S. Sirohi.  Selected papers on speckle metrology , 1991 .

[14]  L. Mandel,et al.  Optical Coherence and Quantum Optics , 1995 .

[15]  Hans J. Tiziani,et al.  Spectral and temporal phase evaluation for interferometry and speckle applications , 1999, Other Conferences.

[16]  Rajpal S. Sirohi.  Engineering applications of speckle phenomenon , 1999, Other Conferences.

[17]  William L. Wolfe,et al.  Scattering from microrough surfaces: comparison of theory and experiment , 1983 .

[18]  J. Dainty.  Laser speckle and related phenomena , 1975 .

[19]  Eugenio R. Mendez,et al.  Experimental study of scattering from characterized random surfaces , 1987 .

[20]  H Truckenbrodt,et al.  Interfacial roughness and related scatter in ultraviolet optical coatings: a systematic experimental approach. , 1998, Applied optics.

[21]  J. Bennett,et al.  Introduction to Surface Roughness and Scattering , 1999 .

[22]  D. N. Rao,et al.  Experimental Demonstration of Spectral Modification in a Mach-Zehnder Interferometer , 1994 .

[23]  M. Françon,et al.  Laser Speckle and Applications in Optics , 1979 .

[24]  朝倉 利光,et al.  J.C.Dainty 編 : Laser Speckle and Related Phenomena, Springer-Verlag, Berlin and Heidelberg, 1975, 286ページ, 23.5×16cm, 15,170円, (Topics in Applied Physics, Vol.9) , 1976 .