Developing an Ear Prosthesis Fabricated in Polyvinylidene Fluoride by a 3D Printer with Sensory Intrinsic Properties of Pressure and Temperature

An ear prosthesis was designed in 3D computer graphics software and fabricated using a 3D printing process of polyvinylidene fluoride (PVDF) for use as a hearing aid. In addition, the prosthesis response to pressure and temperature was observed. Pyroelectric and piezoelectric properties of this ear prosthesis were investigated using an astable multivibrator circuit, as changes in PVDF permittivity were observed according to variations of pressure and temperature. The results show that this prosthesis is reliable for use under different conditions of pressure (0 Pa to 16,350 Pa) and temperature (2 °C to 90 °C). The experimental results show an almost linear and inversely proportional behavior between the stimuli of pressure and temperature with the frequency response. This 3D-printed ear prosthesis is a promising tool and has a great potentiality in the biomedical engineering field because of its ability to generate an electrical potential proportional to pressure and temperature, and it is the first time that such a device has been processed by the additive manufacturing process (3D printing). More work needs to be carried out to improve the performance, such as electrical stimulation of the nervous system, thereby extending the purpose of a prosthesis to the area of sensory perception.

[1]  A. J. Lovinger.  Ferroelectric Polymers , 1983, Science.

[2]  Sung-Taek Hong,et al.  An update on auricular reconstruction: three major auricular malformations of microtia, prominent ear and cryptotia , 2010, Current opinion in otolaryngology & head and neck surgery.

[3]  Xunlin Qiu,et al.  Patterned piezo-, pyro-, and ferroelectricity of poled polymer electrets , 2010 .

[4]  Qiming Zhang,et al.  Electrical and thermal properties of vinylidene fluoride–trifluoroethylene-based polymer system with coexisting ferroelectric and relaxor states , 2013, Journal of Materials Science.

[5]  D. Cho,et al.  3D printing of composite tissue with complex shape applied to ear regeneration , 2014, Biofabrication.

[6]  Ilker S. Bayer,et al.  Biocompatible poly (vinylidene fluoride)/cyanoacrylate composite coatings with tunable hydrophobicity and bonding strength , 2008 .

[7]  Carlos Omar González-Morán,et al.  Development of Poly(vinylidene flouride) Polymer Applied in Force Sensors for Gait Analysis in Wistar Mice of Physiology Research Laboratory , 2008 .

[8]  R. Filipo,et al.  Low-frequency pitch perception in children with cochlear implants in comparison to normal hearing peers , 2015, European Archives of Oto-Rhino-Laryngology.

[9]  H. R. Gallantree.  Review of transducer applications of polyvinylidene fluoride , 1983 .

[10]  Q. Sun,et al.  Three-Dimensional Finite Element Modeling of Human Ear for Sound Transmission , 2004, Annals of Biomedical Engineering.

[11]  R Marks,et al.  Evaluation of biomechanical properties of human skin. , 1995, Clinics in dermatology.

[12]  Marc Moonen,et al.  A Stereo Music Preprocessing Scheme for Cochlear Implant Users , 2015, IEEE Transactions on Biomedical Engineering.

[13]  J. Tysome,et al.  Systematic Review of Middle Ear Implants: Do They Improve Hearing as Much as Conventional Hearing Aids? , 2010, Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology.

[14]  Carlos Omar González-Morán,et al.  System for Controlling the Moisture of the Soil Using Humidity Sensors from a Polyvinylidenefluoride Fiber Mats , 2013 .

[15]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[16]  D. Haynes,et al.  Middle Ear Implants for Rehabilitation of Sensorineural Hearing Loss: A Systematic Review of FDA Approved Devices , 2014, Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology.

[17]  D. Gault,et al.  Patient satisfaction and aesthetic outcomes after ear reconstruction with a Branemark-type, bone-anchored, ear prosthesis: a 16 year review. , 2010, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.

[18]  J. Jang,et al.  Highly Sensitive and Multifunctional Tactile Sensor Using Free-standing ZnO/PVDF Thin Film with Graphene Electrodes for Pressure and Temperature Monitoring , 2015, Scientific Reports.

[19]  U Klinge,et al.  PVDF as a new polymer for the construction of surgical meshes. , 2002, Biomaterials.

[20]  Pierre Ueberschlag,et al.  PVDF piezoelectric polymer , 2001 .

[21]  R Guidoin,et al.  Polyvinylidene fluoride (PVDF) as a biomaterial: from polymeric raw material to monofilament vascular suture. , 1995, Journal of biomedical materials research.

[22]  H. Zahouani,et al.  In vivo measurements of the elastic mechanical properties of human skin by indentation tests. , 2008, Medical engineering & physics.

[23]  Khalil Arshak,et al.  The Use of PE/PVDF Pressure and Temperature Sensors in Smart Wireless Sensor Network System Developed for Environmental Monitoring , 2008 .

[24]  Yun Fang Jia,et al.  Simulation and Experiment of PVDF Temperature Sensor , 2013 .

[25]  Carlos Omar González Morán,et al.  Polyvinylidene Flouride Polymer Applied in an Intraocular Pressure Sensor , 2005 .

[26]  Davide G. Tommasi,et al.  Age- and sex-related changes in the normal human ear. , 2009, Forensic science international.

[27]  Gianfranco Gassino,et al.  CAD/CAM ear model and virtual construction of the mold. , 2007, The Journal of prosthetic dentistry.

[28]  S. N. Fedosov,et al.  Corona poling of a ferroelectric polymer (PVDF) , 1999, Other Conferences.

[29]  J. Kiefer,et al.  Combined aesthetic and functional reconstruction of ear malformations. , 2010, Advances in oto-rhino-laryngology.

[30]  J. Triglia,et al.  Quality of life in bimodal hearing users (unilateral cochlear implants and contralateral hearing aids) , 2015, European Archives of Oto-Rhino-Laryngology.