3D printing for soft robotics – a review

Abstract Soft robots have received an increasing attention due to their advantages of high flexibility and safety for human operators but the fabrication is a challenge. Recently, 3D printing has been used as a key technology to fabricate soft robots because of high quality and printing multiple materials at the same time. Functional soft materials are particularly well suited for soft robotics due to a wide range of stimulants and sensitive demonstration of large deformations, high motion complexities and varied multi-functionalities. This review comprises a detailed survey of 3D printing in soft robotics. The development of key 3D printing technologies and new materials along with composites for soft robotic applications is investigated. A brief summary of 3D-printed soft devices suitable for medical to industrial applications is also included. The growing research on both 3D printing and soft robotics needs a summary of the major reported studies and the authors believe that this review article serves the purpose.

[1]  Kyung Hyun Choi,et al.  In situ UV curable 3D printing of multi-material tri-legged soft bot with spider mimicked multi-step forward dynamic gait , 2016 .

[2]  Ioannis K. Kaliakatsos,et al.  Microrobots for minimally invasive medicine. , 2010, Annual review of biomedical engineering.

[3]  Katsu Yamane,et al.  3D printed soft skin for safe human-robot interaction , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[4]  Daniela Rus,et al.  Hydraulic Autonomous Soft Robotic Fish for 3D Swimming , 2014, ISER.

[5]  David W. Rosen,et al.  A review of synthesis methods for additive manufacturing , 2016 .

[6]  T Umedachi,et al.  Softworms: the design and control of non-pneumatic, 3D-printed, deformable robots , 2016, Bioinspiration & biomimetics.

[7]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[8]  Rahim Mutlu,et al.  Mechanical stiffness augmentation of a 3D printed soft prosthetic finger , 2016, 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

[9]  Fionnuala Connolly,et al.  Automatic design of fiber-reinforced soft actuators for trajectory matching , 2016, Proceedings of the National Academy of Sciences.

[10]  Thomas J. Wallin,et al.  3D printing antagonistic systems of artificial muscle using projection stereolithography , 2015, Bioinspiration & biomimetics.

[11]  Yong Huang,et al.  Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .

[12]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[13]  R. Wood,et al.  A bidirectional shape memory alloy folding actuator , 2012 .

[14]  ChoiJin,et al.  4D Printing Technology: A Review , 2015 .

[15]  Harwinder Singh,et al.  Development of rapid tooling using fused deposition modeling: a review , 2016 .

[16]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[17]  Sung-Hoon Ahn,et al.  Review of manufacturing processes for soft biomimetic robots , 2009 .

[18]  Mehmet Remzi Dogar,et al.  Haptic identification of objects using a modular soft robotic gripper , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[19]  F. Fruggiero,et al.  State of the art of additive manufacturing: Review for tolerances, mechanical resistance and production costs , 2016 .

[20]  Robert J. Wood,et al.  An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.

[21]  Jonathan Rossiter,et al.  Soft Robotics: Trends, Applications and Challenges: Proceedings of the Soft Robotics Week, April 25-30, 2016, Livorno, Italy , 2017 .

[22]  Yigit Mengüç,et al.  Directly Fabricating Soft Robotic Actuators With an Open-Source 3-D Printer , 2017, IEEE Robotics and Automation Letters.

[23]  L. Venkat Raghavan,et al.  3D Metal Printing Technology , 2016 .

[24]  Yong Liu,et al.  3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .

[25]  M SpinksGeoffrey,et al.  3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers , 2016 .

[26]  Scott J. Hollister,et al.  Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients , 2015, Science Translational Medicine.

[27]  Sung-Hyuk Song,et al.  Smart soft composite: An integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials , 2012 .

[28]  Satyajit Patra,et al.  A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue , 2016, Cell Biochemistry and Biophysics.

[29]  Wai Yee Yeong,et al.  Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential , 2017 .

[30]  Daniela Rus,et al.  A Recipe for Soft Fluidic Elastomer Robots , 2015, Soft robotics.

[31]  K. Bertoldi,et al.  A Bioinspired Soft Actuated Material , 2014, Advanced materials.

[32]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[33]  Hermann Seitz,et al.  A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.

[34]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[35]  Johan U. Lind,et al.  Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing , 2016 .

[36]  K H Kang,et al.  Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds , 2012, Biofabrication.

[37]  Takuya Umedachi,et al.  Design of a 3D-printed soft robot with posture and steering control , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[38]  Jonathan E. Clark,et al.  Fast and Robust: Hexapedal Robots via Shape Deposition Manufacturing , 2002 .

[39]  M. Sitti,et al.  Soft Actuators for Small‐Scale Robotics , 2017, Advanced materials.

[40]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[41]  Robert J. Wood,et al.  Soft robotic glove for combined assistance and at-home rehabilitation , 2015, Robotics Auton. Syst..

[42]  Peter Moeck,et al.  3D Systems' Technology Overview and New Applications in Manufacturing, Engineering, Science, and Education. , 2014, 3D printing and additive manufacturing.

[43]  Kevin C. Galloway,et al.  Biologically Inspired Soft Robot for Thumb Rehabilitation , 2014 .

[44]  Christopher B. Williams,et al.  Additive manufacturing (AM) and nanotechnology: promises and challenges , 2013 .

[45]  Daniela Rus,et al.  Autonomous undulatory serpentine locomotion utilizing body dynamics of a fluidic soft robot , 2013, Bioinspiration & biomimetics.

[46]  T. Someya,et al.  Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixes. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[47]  Albert J. Shih,et al.  Additive Manufacturing of Custom Orthoses and Prostheses – A Review☆ , 2015 .

[48]  Harish Bhaskaran,et al.  Additive nanomanufacturing — A review , 2014 .

[49]  D. Therriault,et al.  Solvent-cast direct-write microfabrication of thermoplastic-based nanocomposite structures , 2013 .

[50]  Robert Bogue,et al.  Flexible and soft robotic grippers: the key to new markets? , 2016, Ind. Robot.

[51]  Huichan Zhao,et al.  Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense , 2015 .

[52]  Levin J. Sliker,et al.  Surgical evaluation of a novel tethered robotic capsule endoscope using micro-patterned treads , 2012, Surgical Endoscopy.

[53]  Daniela Rus,et al.  Printable hydraulics: A method for fabricating robots by 3D co-printing solids and liquids , 2015, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[54]  Bharat Bhushan,et al.  An overview of additive manufacturing (3D printing) for microfabrication , 2017 .

[55]  Simon Ford,et al.  Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .

[56]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[57]  Rashid Bashir,et al.  Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography. , 2012, Lab on a chip.

[58]  Arne Rost,et al.  The SLS-Generated Soft Robotic Hand - An Integrated Approach Using Additive Manufacturing and Reinforcement Learning , 2013, 2013 12th International Conference on Machine Learning and Applications.

[59]  Mark R. Cutkosky,et al.  Material Modeling for Shape Deposition Manufacturing of Biomimetic Components , 1999 .

[60]  ZhangYuanfeng,et al.  Highly Sensitive Flexible Printed Accelerometer System for Monitoring Vital Signs , 2014 .

[61]  Silvestro Micera,et al.  Soft robot for gait rehabilitation of spinalized rodents , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[62]  G. Whitesides,et al.  Soft Actuators and Robots that Are Resistant to Mechanical Damage , 2014 .

[63]  Jianzhong Fu,et al.  Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review , 2016 .

[64]  Andrew J. Petruska,et al.  Soft Micro-Robots for Military Medicine , 2017 .

[65]  Matteo Aureli,et al.  Fused filament 3D printing of ionic polymer-metal composites (IPMCs) , 2015 .

[66]  Takuya Umedachi,et al.  Highly deformable 3-D printed soft robot generating inching and crawling locomotions with variable friction legs , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[67]  Yaoyao Fiona Zhao,et al.  Additive manufacturing-enabled design theory and methodology: a critical review , 2015 .

[68]  Mojtaba Khorram Niaki,et al.  Additive manufacturing management: a review and future research agenda , 2017, Int. J. Prod. Res..

[69]  Yang Yang,et al.  3D printing of shape memory polymer for functional part fabrication , 2016 .

[70]  N. Shamsaei,et al.  Additive manufacturing of fatigue resistant materials: Challenges and opportunities , 2017 .

[71]  Jonathan Rossiter,et al.  Printing 3D dielectric elastomer actuators for soft robotics , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[72]  Kevin O'Brien,et al.  Optoelectronically innervated soft prosthetic hand via stretchable optical waveguides , 2016, Science Robotics.

[73]  R. Bashir,et al.  Development of Miniaturized Walking Biological Machines , 2012, Scientific Reports.

[74]  Jamie L. Branch,et al.  Robotic Tentacles with Three‐Dimensional Mobility Based on Flexible Elastomers , 2013, Advanced materials.

[75]  Amirhesam Amerinatanzi,et al.  Fabrication of NiTi through additive manufacturing: A review , 2016 .

[76]  Yu Wang,et al.  Application and performance of 3D printing in nanobiomaterials , 2013 .

[77]  Abbas Z. Kouzani,et al.  3D printed hydrogel soft actuators , 2016, 2016 IEEE Region 10 Conference (TENCON).

[78]  Atin Angrish,et al.  A critical analysis of additive manufacturing technologies for aerospace applications , 2014, 2014 IEEE Aerospace Conference.

[79]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[80]  Ibrahim T. Ozbolat,et al.  Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.

[81]  Jiyu Cai,et al.  4D Printing Dielectric Elastomer Actuator Based Soft Robots , 2016 .

[82]  Robert J. Wood,et al.  Wearable soft sensing suit for human gait measurement , 2014, Int. J. Robotics Res..

[83]  James C. Weaver,et al.  Soft robotic sleeve supports heart function , 2017, Science Translational Medicine.

[84]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[85]  Sharon L.N. Ford,et al.  Additive Manufacturing Technology: Potential Implications for U.S. Manufacturing Competitiveness , 2014 .

[86]  Conor J. Walsh,et al.  Shape Deposition Manufacturing of a Soft, Atraumatic, and Deployable Surgical Grasper , 2015 .

[87]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[88]  Tarik J. Dickens,et al.  Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing , 2017 .

[89]  G. Whitesides,et al.  Pneumatic Networks for Soft Robotics that Actuate Rapidly , 2014 .

[90]  A. Gaharwar,et al.  Advanced Bioinks for 3D Printing: A Materials Science Perspective , 2016, Annals of Biomedical Engineering.

[91]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[92]  Ritu Raman,et al.  A modular approach to the design, fabrication, and characterization of muscle-powered biological machines , 2017, Nature Protocols.

[93]  Hao Chen,et al.  Design and analysis of a soft mobile robot composed of multiple thermally activated joints driven by a single actuator , 2010, 2010 IEEE International Conference on Robotics and Automation.

[94]  Yuwang,et al.  Application and Performance of 3 D Printing in Nanobiomaterials , 2015 .

[95]  Ahmad Athif Mohd Faudzi,et al.  A review article: investigations on soft materials for soft robot manipulations , 2015, The International Journal of Advanced Manufacturing Technology.

[96]  Xuanhe Zhao,et al.  Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water , 2017, Nature Communications.

[97]  Brian Mellor,et al.  Multiple material additive manufacturing – Part 1: a review , 2013 .

[98]  Mark R. Cutkosky,et al.  Biomimetic Robotic Mechanisms via Shape Deposition Manufacturing , 2000 .

[99]  Tim C. Lueth,et al.  Multi arm snake-like robot kinematics , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[100]  WeiYing,et al.  A Novel, Variable Stiffness Robotic Gripper Based on Integrated Soft Actuating and Particle Jamming , 2016 .

[101]  Huai-Ti Lin,et al.  GoQBot: a caterpillar-inspired soft-bodied rolling robot , 2011, Bioinspiration & biomimetics.

[102]  Wendelin J. Stark,et al.  3D printed lost-wax casted soft silicone monoblocks enable heart-inspired pumping by internal combustion , 2014 .

[103]  Aaron M. Dollar,et al.  Design and Evaluation of a Robust Compliant Grasper Using Shape Deposition Manufacturing , 2005 .

[104]  YapHong Kai,et al.  High-Force Soft Printable Pneumatics for Soft Robotic Applications , 2016 .

[105]  Christo Dordlofva,et al.  Opportunities and Challenges for Additive Manufacturing in Space Applications , 2016 .

[106]  Kyung Hyun Choi,et al.  Omni Directional Multimaterial Soft Cylindrical Actuator and Its Application as a Steerable Catheter. , 2017, Soft robotics.

[107]  Philip Tack,et al.  3D-printing techniques in a medical setting: a systematic literature review , 2016, BioMedical Engineering OnLine.

[108]  Farshid Guilak,et al.  3D Printing: 3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures (Adv. Mater. 27/2015) , 2015, Advanced materials.

[109]  Steve Simon,et al.  Options for additive rapid prototyping methods (3D printing) in MEMS technology , 2014 .

[110]  Daniel M. Vogt,et al.  Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing , 2015, Advanced materials.

[111]  Suiyang Khoo,et al.  Evolution of 3D printed soft actuators , 2016 .

[112]  C. D. Onal,et al.  A modular approach to soft robots , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).