Two new strategies to increase the signal to noise ratio in positron volume imaging
暂无分享,去创建一个
[1] Edward J. Hoffman,et al. Use of digital front end electronics for optimization of a modular PET detector , 1991, Conference Record of the 1991 IEEE Nuclear Science Symposium and Medical Imaging Conference.
[2] L. Laperriere,et al. Monte Carlo analysis of camera-induced spectral contamination for different primary energies , 1992 .
[3] C J Thompson,et al. PETSIM: Monte Carlo simulation of all sensitivity and resolution parameters of cylindrical positron imaging systems. , 1992, Physics in medicine and biology.
[4] R. H. Huesman,et al. Initial Results from the Donner 600 Crystal Positron Tomograph , 1987, IEEE Transactions on Nuclear Science.
[5] S. Marrett,et al. Improving the precision and accuracy of Monte Carlo simulation in positron emission tomography , 1991, Conference Record of the 1991 IEEE Nuclear Science Symposium and Medical Imaging Conference.
[6] Christopher J. Thompson,et al. The problem of scatter correction in positron volume imaging , 1993, IEEE Trans. Medical Imaging.
[7] Roger Lecomte,et al. High resolution positron emission tomography with a prototype camera based on solid state scintillation detectors , 1990 .
[8] M. P. Buchin,et al. Performance Parameters of a Positron Imaging Camera , 1976, IEEE Transactions on Nuclear Science.
[9] J. Rogers,et al. Scatter correction for positron volume imaging using analytic simulation , 1991, Conference Record of the 1991 IEEE Nuclear Science Symposium and Medical Imaging Conference.
[10] P E Kinahan,et al. Positron emission tomography with a large axial acceptance angle: signal-to-noise considerations. , 1991, IEEE transactions on medical imaging.