Muscle synergies may improve optimization prediction of knee contact forces during walking.

The ability to predict patient-specific joint contact and muscle forces accurately could improve the treatment of walking-related disorders. Muscle synergy analysis, which decomposes a large number of muscle electromyographic (EMG) signals into a small number of synergy control signals, could reduce the dimensionality and thus redundancy of the muscle and contact force prediction process. This study investigated whether use of subject-specific synergy controls can improve optimization prediction of knee contact forces during walking. To generate the predictions, we performed mixed dynamic muscle force optimizations (i.e., inverse skeletal dynamics with forward muscle activation and contraction dynamics) using data collected from a subject implanted with a force-measuring knee replacement. Twelve optimization problems (three cases with four subcases each) that minimized the sum of squares of muscle excitations were formulated to investigate how synergy controls affect knee contact force predictions. The three cases were: (1) Calibrate+Match where muscle model parameter values were calibrated and experimental knee contact forces were simultaneously matched, (2) Precalibrate+Predict where experimental knee contact forces were predicted using precalibrated muscle model parameters values from the first case, and (3) Calibrate+Predict where muscle model parameter values were calibrated and experimental knee contact forces were simultaneously predicted, all while matching inverse dynamic loads at the hip, knee, and ankle. The four subcases used either 44 independent controls or five synergy controls with and without EMG shape tracking. For the Calibrate+Match case, all four subcases closely reproduced the measured medial and lateral knee contact forces (R2 ≥ 0.94, root-mean-square (RMS) error < 66 N), indicating sufficient model fidelity for contact force prediction. For the Precalibrate+Predict and Calibrate+Predict cases, synergy controls yielded better contact force predictions (0.61 < R2 < 0.90, 83 N < RMS error < 161 N) than did independent controls (-0.15 < R2 < 0.79, 124 N < RMS error < 343 N) for corresponding subcases. For independent controls, contact force predictions improved when precalibrated model parameter values or EMG shape tracking was used. For synergy controls, contact force predictions were relatively insensitive to how model parameter values were calibrated, while EMG shape tracking made lateral (but not medial) contact force predictions worse. For the subject and optimization cost function analyzed in this study, use of subject-specific synergy controls improved the accuracy of knee contact force predictions, especially for lateral contact force when EMG shape tracking was omitted, and reduced prediction sensitivity to uncertainties in muscle model parameter values.

[1]  F. Zajac Muscle and tendon: properties, models, scaling, and application to biomechanics and motor control. , 1989, Critical reviews in biomedical engineering.

[2]  J. He,et al.  Feedback gains for correcting small perturbations to standing posture , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[3]  M. Latash,et al.  Electromechanical delay: An experimental artifact. , 1992, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[4]  D. Winter,et al.  Predicting muscle forces in gait from EMG signals and musculotendon kinematics. , 1992, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[5]  S. Furner,et al.  Musculoskeletal Conditions in the United States , 1992 .

[6]  E Y Chao,et al.  Internal forces and moments in the femur during walking. , 1997, Journal of biomechanics.

[7]  Carlo J. De Luca,et al.  The Use of Surface Electromyography in Biomechanics , 1997 .

[8]  W Baumann,et al.  The three-dimensional determination of internal loads in the lower extremity. , 1997, Journal of biomechanics.

[9]  H. Sebastian Seung,et al.  Learning the parts of objects by non-negative matrix factorization , 1999, Nature.

[10]  Ilse Jonkers,et al.  An EMG-based, muscle driven forward simulation of single support phase of gait. , 2002, Journal of biomechanics.

[11]  K. Manal,et al.  A one-parameter neural activation to muscle activation model: estimating isometric joint moments from electromyograms. , 2003, Journal of biomechanics.

[12]  F. Lacquaniti,et al.  Five basic muscle activation patterns account for muscle activity during human locomotion , 2004, The Journal of physiology.

[13]  David G Lloyd,et al.  Neuromusculoskeletal modeling: estimation of muscle forces and joint moments and movements from measurements of neural command. , 2004, Journal of applied biomechanics.

[14]  Jaco F Schutte,et al.  Determination of patient-specific multi-joint kinematic models through two-level optimization. , 2005, Journal of biomechanics.

[15]  Stephen J Piazza,et al.  Muscle-driven forward dynamic simulations for the study of normal and pathological gait , 2006, Journal of NeuroEngineering and Rehabilitation.

[16]  Christopher Townsend,et al.  A multiaxial force-sensing implantable tibial prosthesis. , 2006, Journal of biomechanics.

[17]  F. Lacquaniti,et al.  Motor patterns in human walking and running. , 2006, Journal of neurophysiology.

[18]  D. Thelen,et al.  Using computed muscle control to generate forward dynamic simulations of human walking from experimental data. , 2006, Journal of biomechanics.

[19]  Walter Herzog,et al.  Model-based estimation of muscle forces exerted during movements. , 2007, Clinical biomechanics.

[20]  Dong Zhao,et al.  In vivo medial and lateral tibial loads during dynamic and high flexion activities , 2007, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[21]  Ayman Habib,et al.  OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement , 2007, IEEE Transactions on Biomedical Engineering.

[22]  Jeffrey A. Reinbolt,et al.  From the Selectedworks of Jeffrey A. Reinbolt Design of Patient-specific Gait Modifications for Knee Osteoarthritis Rehabilitation Design of Patient-specific Gait Modifications for Knee Osteoarthritis Rehabilitation , 2022 .

[23]  May Q. Liu,et al.  Muscle contributions to support and progression over a range of walking speeds. , 2008, Journal of biomechanics.

[24]  B. Fregly,et al.  Sensitivity of knee replacement contact calculations to kinematic measurement errors , 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[25]  Scott L. Delp,et al.  A Model of the Lower Limb for Analysis of Human Movement , 2010, Annals of Biomedical Engineering.

[26]  Thomas Schmitz-Rode,et al.  Surface electromyography and muscle force: limits in sEMG-force relationship and new approaches for applications. , 2009, Clinical biomechanics.

[27]  Richard R Neptune,et al.  Modular control of human walking: a simulation study. , 2009, Journal of biomechanics.

[28]  Justin W. Fernandez,et al.  Evaluation of predicted knee‐joint muscle forces during gait using an instrumented knee implant , 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[29]  Won-Man Park,et al.  Effect of Joint Center Location on In-Vivo Joint Contact Forces During Walking , 2010 .

[30]  Richard R Neptune,et al.  Merging of healthy motor modules predicts reduced locomotor performance and muscle coordination complexity post-stroke. , 2010, Journal of neurophysiology.

[31]  Richard R Neptune,et al.  Modular control of human walking: Adaptations to altered mechanical demands. , 2010, Journal of biomechanics.

[32]  Stacie A. Chvatal,et al.  Decomposing Muscle Activity in Motor TasksMethods and Interpretation , 2010 .

[33]  Marcus G Pandy,et al.  Simultaneous prediction of muscle and contact forces in the knee during gait. , 2010, Journal of biomechanics.

[34]  Antonie J van den Bogert,et al.  Implicit methods for efficient musculoskeletal simulation and optimal control. , 2011, Procedia IUTAM.

[35]  Richard R Neptune,et al.  Three-dimensional modular control of human walking. , 2012, Journal of biomechanics.

[36]  Marcus G Pandy,et al.  Grand challenge competition to predict in vivo knee loads , 2012, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[37]  Dario Farina,et al.  EMG-Driven Forward-Dynamic Estimation of Muscle Force and Joint Moment about Multiple Degrees of Freedom in the Human Lower Extremity , 2012, PloS one.

[38]  Antonie J van den Bogert,et al.  Effect of low pass filtering on joint moments from inverse dynamics: implications for injury prevention. , 2012, Journal of biomechanics.

[39]  Benjamin J Fregly,et al.  Update on grand challenge competition to predict in vivo knee loads. , 2013, Journal of biomechanical engineering.

[40]  Christopher Knowlton,et al.  Fine tuning total knee replacement contact force prediction algorithms using blinded model validation. , 2013, Journal of biomechanical engineering.

[41]  Richard R Neptune,et al.  The influence of merged muscle excitation modules on post-stroke hemiparetic walking performance. , 2013, Clinical biomechanics.

[42]  Dario Farina,et al.  A musculoskeletal model of human locomotion driven by a low dimensional set of impulsive excitation primitives , 2013, Front. Comput. Neurosci..

[43]  Kurt Manal,et al.  An electromyogram-driven musculoskeletal model of the knee to predict in vivo joint contact forces during normal and novel gait patterns. , 2013, Journal of biomechanical engineering.

[44]  Michael W Hast,et al.  Dual-joint modeling for estimation of total knee replacement contact forces during locomotion. , 2013, Journal of biomechanical engineering.