论文信息 - 3D near-field model for uniform slanted fiber gratings

3D near-field model for uniform slanted fiber gratings

A 3D near-field model for a uniform slanted fiber Bragg grating (FBG) is presented. This model, based on antenna theory, allows for the calculation of the radiated near field in the space surrounding a fiber that contains a tilted uniform fiber Bragg grating. Radiation patterns can also be obtained. The model has been successfully checked via experiments. © 2003 Wiley Periodicals, Inc. Microwave Opt Technol Lett 38: 428–432, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11081

Adolfo Cobo | Cesar Jauregui | Jose Miguel Lopez-Higuera

[1] A. Quintela,et al. Experimental characterization of tilted fiber Bragg gratings , 2002, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002(Cat. No.02EX533).

[2] G. Laffont,et al. Tilted short-period fibre-Bragg-grating-induced coupling to cladding modes for accurate refractometry , 2001 .

[3] S. James,et al. Fiber-optic liquid-level sensor using a long-period grating. , 2001, Optics letters.

[4] John E. Sipe,et al. Tilted fiber phase gratings , 1996 .

[5] Karianne Pran. Performance of apodized Bragg gratings in dynamic strain measurements using interferometric interrogation , 1999, International Conference on Optical Fibre Sensors.

[6] M. Douay,et al. Behavior of Bragg gratings, written in germanosilicate fibers, against /spl gamma/-ray exposure at low dose rate , 1994, IEEE Photonics Technology Letters.

[7] Raman Kashyap,et al. Physical properties of optical fiber sidetap grating filters: free-space model , 1999 .

[8] J. L. Cruz,et al. Temperature-independent strain sensor using a chirped Bragg grating in a tapered optical fibre , 1995 .