Object-oriented programming in FEM and BEM: a bibliography (1990-2003)

Abstract This paper gives a bibliographical review of the object-oriented programming applied to the finite element method as well as to the boundary element method. The bibliography at the end of the paper contains references to papers, conference proceedings and theses/dissertations on the subject that were published between 1990 and 2003. The following topics are included: finite element method—object-oriented programming philosophy, mesh modelling, distributed/parallel processing, toolkits and libraries, object-oriented specific applications (aerospace, civil engineering/geomechanics, coupled problems, dynamical systems, electromagnetics, fracture mechanics and contact problems, material simulations/manufacturing, mechanical engineering, nonlinear structural simulations, optimization, others); boundary element method. Totally 408 references are listed.

[1]  Graham C. Archer,et al.  Distributed object-oriented nonlinear finite element analysis , 2002 .

[2]  Russell S. Peak,et al.  Object-oriented parser-based finite element analysis tool interface , 1999, Optics East.

[3]  G. Yu.  Object-oriented models for numerical and finite element analysis , 1994 .

[4]  Tamer M. Wasfy,et al.  An Object-Oriented Graphical Interface for Dynamic Finite Element Modeling of Belt-Drives , 2002 .

[5]  John F. Abel,et al.  Use of shallow class hierarchies to facilitate object-oriented nonlinear structural simulations , 2002 .

[6]  Xiang-Yang Li,et al.  SIFFEA: Scalable Integrated Framework for Finite Element Analysis , 1999, ISCOPE.

[7]  Daniel A. White,et al.  FEMSTER: An object-oriented class library of high-order discrete differential forms , 2005, TOMS.

[8]  Nicholas Zabaras,et al.  Using Objects to Model Finite Deformation Plasticity , 1999, Engineering with Computers.

[9]  Stephen A. Langer,et al.  Surface-Roughness Induced Residual Stresses in Thermal Barrier Coatings: Computer Simulations , 1998 .

[10]  Mark S. Shephard,et al.  An Object-Oriented Framework for Reliable Numerical Simulations , 1999, Engineering with Computers.

[11]  S. M. R. Tabatabai.  Object-oriented finite element-based design and progressive steel weight minimization , 2002 .

[12]  Bulent Nedim Alemdar.  Distributed plasticity analysis of steel building structural systems , 2001 .

[13]  S. Buttgenbach,et al.  A modular environment for the design of micromachined silicon devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[14]  John E. Akin,et al.  Object-oriented Fortran 90 P-adaptive finite element method , 2000 .

[15]  Keiichi Hirose,et al.  A Knowledge‐Based Structural Analysis Based on an Object‐Oriented Approach , 1992 .

[16]  Samuel A. Vigil,et al.  PC Windows Finite Element Modeling of Landfill Gas Flow , 1996 .

[17]  George F. Luger,et al.  Object-Oriented Programming for Scientific Codes. II: Examples in C++ , 1992 .

[18]  Venkat V. S. S. Sastry,et al.  A generic structure for scalar and vector boundary element codes using Fortran 90 , 1999 .

[19]  M. U. Hosain,et al.  Application of OOP in Developing Finite Element Analysis Programs Using C , 1994 .

[20]  Hideo Kobayashi,et al.  Stiffness Optimization of Composite Laminated Structures by Object-Oriented Finite-Element Analysis Method. , 1994 .

[21]  Udo Meißner,et al.  Object-oriented modelling of three-dimensional hydro-geotechnical systems , 1996 .

[22]  Xianming Shi,et al.  A Novel Approach to Extract Knowledge from Simulation Results , 2002 .

[23]  George F. Luger,et al.  Object-oriented programming for scientific codes. I : Thoughts and concepts , 1992 .

[24]  Hideo Miura,et al.  Object-oriented CAE System for Structural Design of LSI Packages , 2000 .

[25]  Kjell Orsborn,et al.  A system for information management in simulation of manufacturing processes , 2002 .

[26]  T. Driesens,et al.  A Generalised Approach Of Boundary Element AndFinite Element Methods Using Object Orientation , 1970 .

[27]  Asif Usmani,et al.  Finite element analysis of solidification using object-oriented and parallel techniques , 1997 .

[28]  Miklós Iványi,et al.  Unified object-oriented definition of thin-walled steel beam-column cross-sections , 2001 .

[29]  David I Blockley,et al.  Structural dynamic analysis using the interacting objects process model , 1997 .

[30]  Gerhard Henneberger,et al.  Object-oriented genetic algorithms for two-dimensional design optimization of the magnetic circuit of a mobile magnetic resonance device , 2002 .

[31]  M. Papadrakakis,et al.  Advanced solution methods in structural optimization based on evolution strategies , 1998 .

[32]  Sukomal Modak.  Object-oriented concurrent solution algorithms for nonlinear structural dynamics , 1998 .

[33]  D. P. Chen,et al.  An object-oriented design of FEM programs , 1995 .

[34]  Rainer Niekamp,et al.  An object-oriented approach for parallel two- and three-dimensional adaptive finite element computations , 2002 .

[35]  J. S. Arora,et al.  Object-oriented programming for engineering applications , 2005, Engineering with Computers.

[36]  Genki Yagawa,et al.  Automated system for structural design using design window search approach: its application to fusion first wall design , 1997 .

[37]  Ulrich Nieken,et al.  PARSIVAL : A tool for the simulation of crystallization processes , 1999 .

[38]  J. C. Leon,et al.  High-level operations dedicated to the integration of mechanical analysis within a design process , 2005, Engineering with Computers.

[39]  Graham C. Archer,et al.  Distributed Object-Oriented Finite Element Analysis Using Data Structures , 2000 .

[40]  Graham C. Archer,et al.  Object-Oriented Finite Element Analysis , 1996 .

[41]  T. Zimmermann,et al.  Object-oriented finite elements III. Theory and application of automatic programming , 1998 .

[42]  Ren-Chuen Chen,et al.  Object-oriented programming of adaptive finite element and finite volume methods , 1996 .

[43]  Yuichi Sato,et al.  The Prototype of Expert System for Generation of Single-Purposed FEM Code , 1993 .

[44]  Feng Wei,et al.  Object-oriented finite element analysis and programming in VC++ , 2002 .

[45]  Ray P. S. Han,et al.  AN OBJECT‐ORIENTED FRAMEWORK FOR INTERACTIVE NUMERICAL ANALYSIS IN A GRAPHICAL USER INTERFACE ENVIRONMENT , 1996 .

[46]  Al Vermeulen,et al.  OON-SKI: An Introduction , 1993, Sci. Program..

[47]  Robert A. Ballance,et al.  A Framework-Based Environment for Object-Oriented Scientific Codes , 1993, Sci. Program..

[48]  J.-F. Ballay,et al.  A tool using an object oriented language for field computation in a CAD prospect , 1992 .

[49]  G. H. Wang,et al.  Node—based dynamic adaptive grid with quadrilateral and hexahedral elements , 1999 .

[50]  Edward A. Luke,et al.  Loci: A Deductive Framework for Graph-Based Algorithms , 1999, ISCOPE.

[51]  R. I. Mackie.  Using objects to handle complexity in finite element software , 2005, Engineering with Computers.

[52]  Jean-Michel Cros,et al.  FER/SubDomain: An Integrated Environment for Finite Element Analysis using Object-Oriented Approach , 2002 .

[53]  Ulrich Nieken,et al.  Modeling and simulation of crystallization processes using parsival , 2001 .

[54]  K. Chawla,et al.  Microstructure-based simulation of thermomechanical behavior of composite materials by object-oriented finite element analysis , 2002 .

[55]  M. Sarath Kumar,et al.  Object Oriented Programming and Expert Systems in Rotating Machinery , 1997 .

[56]  E. M. Nelson.  Advances in 3D electromagnetic finite element modeling , 1997, Proceedings of the 1997 Particle Accelerator Conference (Cat. No.97CH36167).

[57]  Adele P. Peskin,et al.  An object-oriented approach to general purpose fluid dynamics software☆ , 1996 .

[58]  G. Henneberger,et al.  Object-oriented design of finite element calculations with respect to coupled problems , 2000 .

[59]  S.-P. Scholz.  Elements of an object-oriented FEM++ program in C++ , 1992 .

[60]  Norbert Sczygiol.  Object-oriented analysis of the numerical modelling of castings solidification , 2001 .

[61]  Rodney R. Saldanha,et al.  An object-oriented finite-element program for electromagnetic field computation , 1994 .

[62]  P. Donescu,et al.  A generalized object-oriented approach to solving ordinary and partial differential equations using finite elements , 1996 .

[63]  G. H. Paulino,et al.  A methodology for adaptive finite element analysis: Towards an integrated computational environment , 1999 .

[64]  Grady Booch,et al.  Object-Oriented Analysis and Design with Applications , 1990 .

[65]  T. Zimmermann,et al.  Object-oriented finite elements IV. Symbolic derivations and automatic programming of nonlinear formulations , 2001 .

[66]  K. M. George,et al.  The design of an object-oriented modular expert system shell , 1990, Proceedings of the 1990 Symposium on Applied Computing.

[67]  B. K. Karamete,et al.  UNSTRUCTURED GRID GENERATION AND A SIMPLE TRIANGULATION ALGORITHM FOR ARBITRARY 2-D GEOMETRIES USING OBJECT ORIENTED PROGRAMMING , 1997 .

[68]  Dennis J. Yelton,et al.  A Prototype Scalable, Object-Oriented Finite Element Solver on Multicomputers , 1994, J. Parallel Distributed Comput..

[69]  Alexander Pletzer.  Python & finite elements , 2002 .

[70]  Philippe Remy,et al.  An object oriented approach to finite element programming (Phase I): a system independent windowing environment for developing interactive scientific programs , 1992 .

[71]  W. Poeschl.  B-spline finite elements and their efficiency in solving relativistic mean field equations , 1998 .

[72]  M. H. Aliabadi,et al.  Rule inferencing and object-orientation for boundary elements mesh design , 1997, Artif. Intell. Eng..

[73]  Majidreza Nazem,et al.  Elasto‐plastic analysis of three‐dimensional structures , 2003 .

[74]  M. D. Rucki,et al.  A Program Architecture for Interactive Nonlinear Dynamic Analysis of Structures , 1993 .

[75]  Nicholas Zabaras,et al.  An object-oriented programming approach to the Lagrangian FEM analysis of large inelastic deformations and metal-forming processes , 1999 .

[76]  D. E. Grierson,et al.  A generic model for building design , 2005, Engineering with Computers.

[77]  Marco Lúcio Bittencourt.  Using C++ templates to implement finite element classes , 2000 .

[78]  Torben Andersen,et al.  Integrated modeling of submillimeter radio telescopes , 2002, Workshop on Integrated Modeling of Telescopes.

[79]  Mitsunori Miki.  Object-oriented optimization of discrete structures , 1994 .

[80]  E. J. Silva,et al.  Data management in finite element analysis programs using object-oriented techniques , 1996 .

[81]  W. Craig Carter,et al.  Effects of Interface Roughness on Residual Stresses in Thermal Barrier Coatings , 1999 .

[82]  Dominique Eyheramendy.  Object-oriented finite element programming , 1997 .

[83]  Courtenay T. Vaughan,et al.  Design of dynamic load-balancing tools for parallel applications , 2000, ICS '00.

[84]  Hojjat Adeli,et al.  Distributed Finite-Element Analysis on Network of Workstations—Implementation and Applications , 1995 .

[85]  C. Brebbia,et al.  Boundary Elements IX , 1987 .

[86]  Larry A. Lambe,et al.  Object-oriented mathematical programming and symbolic/numeric interface , 1994 .

[87]  Patricia Bomme,et al.  Toward intelligent object-oriented scientific applications , 2002 .

[88]  Tamer M. Wasfy,et al.  Simulation of physical experiments in immersive virtual environments , 2001 .

[89]  Hideo Kobayashi,et al.  Application of Generic Algorithms to Stiffness Optimization of Laminated Composite Plates with Stress Concentrated Open Holes , 1994 .

[90]  T. Zimmermann,et al.  Object-oriented finite elements I. Principles of symbolic derivations and automatic programming , 1996 .

[91]  Wanlei Zhou,et al.  Object-oriented finite element analysis: a distributed approach to mesh generation , 2002, Fifth International Conference on Algorithms and Architectures for Parallel Processing, 2002. Proceedings..

[92]  Christian Lage,et al.  Concepts: An object-oriented software package for partial differential equations , 2002 .

[93]  Christopher R. Thewalt,et al.  New software architecture for finite element analysis , 1996 .

[94]  R. C. Mesquita,et al.  An object-oriented data structure for a 3-D electromagnetic field computation program preprocessor , 1996 .

[95]  Kay Hameyer,et al.  Object-oriented implementation of an interactive and automatic field-processing surface , 2000 .

[96]  J.-L. Coulomb,et al.  An object-oriented optimization library for finite element method software , 2000 .

[97]  Wilfried B. Krätzig,et al.  Nonlinear simulation of reinforced concrete embedded in a flexible object-oriented finite element software system , 2000 .

[98]  E. Lanham.  The Design and Development of an Integrated System for Object-Oriented Finite Element Computing , 2002 .

[99]  Dominique Eyheramendy,et al.  Object-Oriented Symbolic Derivation and Automatic Programming of Finite Elements in Mechanics , 1999, Engineering with Computers.

[100]  Elisa D. Sotelino,et al.  A Parallel Matrix Class Library in C++ for Computational Mechanics Applications , 1997 .

[101]  Gregory R. Miller,et al.  An algorithmic framework for flexible finite element-based structural modeling , 1996 .

[102]  M. Bastian,et al.  An efficient automatic mesh generator for quadrilateral elements implemented using C , 2003 .

[103]  Jean-François Remacle,et al.  An algorithm oriented mesh database , 2003, IMR.

[104]  Cláudio A. C. Silva,et al.  AN INTERACTIVE OBJECT-ORIENTED TOOL FOR STRUCTURAL OPTIMIZATION , 1998 .

[105]  L.A. Bermudez,et al.  MEF system: an object-oriented finite element package , 1995, Proceedings of 1995 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference.

[106]  Donald W. White,et al.  A matrix class library in C++ for structural engineering computing , 1995 .

[107]  T. Zimmermann,et al.  Object-oriented finite elements II. A symbolic environment for automatic programming , 1996 .

[108]  C. S. Krishnamoorthy,et al.  AUTOMATING FINITE ELEMENT DEVELOPMENT USING OBJECT ORIENTED TECHNIQUES , 1993 .

[109]  Andrew Deeks.  Adaptive finite element analysis using object oriented techniques , 1995 .

[110]  Jacques Besson,et al.  Polymorphic constitutive equations in finite element codes , 1997 .

[111]  G. H. Powell,et al.  An object-oriented algorithm for automated modeling of frame structures: Stiffness modeling , 2005, Engineering with Computers.

[112]  Lichao Yu,et al.  An object-oriented modular framework for implementing the finite element method , 2001 .

[113]  D. Eyheramendy.  An object-oriented hybrid symbolic/numerical approach for the development of finite element codes , 2000 .

[114]  Peter Aitchison,et al.  Object oriented matrix classes for use in a finite element code using C , 1994 .

[115]  J. T. Oden,et al.  Knowledge-based methods and smart algorithms in computational mechanics , 1995 .

[116]  Elisa D. Sotelino,et al.  An object-oriented programming framework for the parallel dynamic analysis of structures , 2002 .

[117]  U. Gabbert,et al.  The product data model as a pool for CAD-FEA data , 2005, Engineering with Computers.

[118]  T. W. Chiu.  Object oriented programming and applications of boundary element method in ground vehicle aerodynamics , 2000 .

[119]  Martin Anantharaman,et al.  Flexible multibody dynamics — An object-oriented approach , 1996 .

[120]  Roberto Ierusalimschy,et al.  Lua—An Extensible Extension Language , 1996 .

[121]  M. Dolenc.  Developing extendable component-oriented finite element software , 2002 .

[122]  Srinivas Kodiyalam,et al.  Object-Oriented, Optimization-Based Design of Satellite Structures , 1994 .

[123]  Robert M. O'Bara,et al.  Analysis model visualization and graphical analysis attribute specification system , 1995 .

[124]  Graham F. Carey,et al.  A scalable, object-oriented finite element solver for partial differential equations on multicomputers , 1992, ICS '92.

[125]  Krzysztof Kozlowski,et al.  A transputer based forward and inverse dynamics solution for flexible planar manipulators , 1995, 1995 Proceedings of the IEEE International Symposium on Industrial Electronics.

[126]  P. A. Pagliosa,et al.  Object oriented boundary element programming: a first approach , 2002 .

[127]  H. Detter,et al.  Hierarchical modelling of microsystems in an object-oriented hardware description language , 1997, 1997 21st International Conference on Microelectronics. Proceedings.

[128]  Jordan J. Cox,et al.  “Modeling Primitives”: an object oriented formulation of boundary value problems in a solid geometric modeling context , 1993, Solid Modeling and Applications.

[129]  Robert Ian Mackie.  Object oriented programming of the finite element method , 1992 .

[130]  R. Sistla,et al.  A distributed heterogeneous computing environment for multidisciplinary design and analysis of aerospace vehicles , 2000 .

[131]  J. Friedrich,et al.  Object-oriented design and implementation of CFDLab: a computer-assisted learning tool for fluid dynamics using dual reciprocity boundary element methodology , 1999 .

[132]  R. R. Gajewski,et al.  Object Oriented Programming and Finite Element Analysis: Achieving Control Over the Calculation Process , 1998, ECOOP Workshops.

[133]  Jamal A. Abdalla,et al.  Object‐Oriented Finite Element and Graphics Data‐Translation Facility , 1992 .

[134]  Jitendra Agarwal,et al.  STRUCTURAL DYNAMIC ANALYSIS ON A CONNECTION MACHINE , 1997 .

[135]  V. Prabhakar,et al.  A knowledge-based approach to model idealization in FEM , 1994, Proceedings of the Tenth Conference on Artificial Intelligence for Applications.

[136]  Rajiv Sampath,et al.  An object‐oriented framework for the implementation of adjoint techniques in the design and control of complex continuum systems , 2000 .

[137]  C. S. Krishnamoorthy,et al.  Object-Oriented Framework for Genetic Algorithms with Application to Space Truss Optimization , 2002 .

[138]  Thomas H. Hyde,et al.  Efficient object-oriented implementation of boundary element software , 2001 .

[139]  E. Gomez,et al.  FEM applied to electromagnetism: effective object-oriented software design , 2002 .

[140]  Robert Ian Mackie.  An object-oriented approach to fully interactive finite element software , 1998 .

[141]  Udo Meißner,et al.  Object-oriented integration of construction and simulation models , 2001 .

[142]  Thomas Zimmermann,et al.  Object-oriented finite element programming: I: Governing principles , 1992 .

[143]  J. C. Ferguson,et al.  Object-Oriented Finite Element Analysis and Its Application in Basin Modelling Software , 1993 .

[144]  Kwong-Sak Leung,et al.  An expert-system shell using structured knowledge: an object-oriented approach , 1990, Computer.

[145]  E. J. Holm,et al.  A unified finite element model for the injection molding process , 1999 .

[146]  Joseph E. Flaherty,et al.  Efficient methods for solving biomechanical equations , 2003 .

[147]  Mitsuhisa Sato,et al.  Janus: A C++ Template Library for Parallel Dynamic Mesh Applications , 1998, ISCOPE.

[148]  G. Berkooz.  An introduction to CFEtools , 2000 .

[149]  Thomas Zimmermann,et al.  Object-oriented finite element programming: III. An efficient implementation in C++ , 1993 .

[150]  M. Schäfer,et al.  Internet Enabled Structural Opimization: New Dimensions to CAE , 2000 .

[151]  Elisa D. Sotelino,et al.  Object-oriented parallel programming tools for structural engineering applications , 1995 .

[152]  D. White,et al.  FEMSTER: an object oriented class library of discrete differential forms , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[153]  Gregory R. Miller,et al.  An adaptable finite element modelling kernel , 1998 .

[154]  Robert Ian Mackie.  Implementation of sub-structuring within an object-oriented framework , 2001 .

[155]  Thomas Zimmermann,et al.  Object-oriented finite element in programming: II: A prototype program in Smalltalk , 1992 .

[156]  Raikanta Sahu,et al.  An Object-Oriented Framework for Multidisciplinary, Multi-Physics, Computational Mechanics , 1999, Engineering with Computers.

[157]  Gregory L. Fenves.  Object-oriented programming for engineering software development , 2005, Engineering with Computers.

[158]  Brett Malone,et al.  An object-oriented analysis and optimization control environment for the conceptual design of aircraft , 1995 .

[159]  Rosemarie Wagner,et al.  A holistic design procedure for membrane structures using the SCOOP framework , 2002 .

[160]  Semyung Wang,et al.  Continuum shape design sensitivity analysis of magnetostatic field using finite element method , 1999 .

[161]  Thomas R. Marrero,et al.  An object-oriented programming approach for heat and mass transfer related finite element analyses , 1998 .

[162]  Tamer M. Wasfy,et al.  Object-oriented virtual environment for visualization of flexible multibody systems , 2001 .

[163]  Robert Ian Mackie.  Object-oriented methods and non-linear finite element analysis: advantages and difficulties , 2002 .

[164]  William E. Lorensen,et al.  Object-Oriented Modeling and Design , 1991, TOOLS.

[165]  Mitsuhisa Sato,et al.  A Framework for Parallel Adaptive Finite Element Methods and Its Template Based Implementation in CC++ , 1997, ISCOPE.

[166]  Trond Kvamsdal,et al.  Object-Oriented Programming in Field Recovery and Error Estimation , 1999, Engineering with Computers.

[167]  Dominique Eyheramendy,et al.  Object-oriented finite element programming: an interactive environment for symbolic derivations, application to an initial boundary value problem , 1996 .

[168]  Yoshitaka Wada,et al.  FEM Class Library Using Object-Oriented Language C++. , 1994 .

[169]  Glaucio H. Paulino,et al.  Nonlinear Finite Element Analysis using an Object-Oriented Philosophy – Application to Beam Elements and to the Cosserat Continuum , 1999, Engineering with Computers.

[170]  Ph. Menétrey,et al.  Object-oriented non-linear finite element analysis: Application to J2 plasticity , 1993 .

[171]  M. H. Aliabadi,et al.  An integrated system for damage tolerance design of aircraft panels , 1970 .

[172]  Philippe R. B. Devloo,et al.  Object Oriented Tools for Scientific Computing , 2000, Engineering with Computers.

[173]  M. L. Heytens,et al.  Application of mechanical-technology CAD to microelectronic device design and manufacturing , 1990, Ninth IEEE/CHMT International Symposium on Electronic Manufacturing Technology,Competitive Manufacturing for the Next Decade.

[174]  M. H. Aliabadi,et al.  An object oriented system for damage tolerance design of stiffened panels , 1999 .

[175]  J. Majewski.  An object oriented implementation for hybrid grid generation , 2000 .

[176]  John Marino,et al.  STRUCTURAL DESIGN, ANALYSIS, OPTIMIZATION, AND COST MODELING USING THE ADAPTIVE MODELING LANGUAGE , 2002 .

[177]  Elisa D. Sotelino,et al.  MUIApp: an object‐oriented graphical user interface application framework , 1997 .

[178]  Shoichi Nakai,et al.  AN OBJECT‐ORIENTED ARCHITECTURE FOR A FINITE ELEMENT METHOD KNOWLEDGE‐BASED SYSTEM , 1996 .

[179]  Mitsuhisa Sato,et al.  Generic Programming for Parallel Mesh Problems , 1999, ISCOPE.

[180]  U. Häuβler-Combe.  Coupling boundary-elements and finite-elements—A structured approach , 1996 .

[181]  Ralph Johnson,et al.  design patterns elements of reusable object oriented software , 2019 .

[182]  J. T. Oden,et al.  Towards an automated environment in computational mechanics , 1993 .

[183]  Thomas Zimmermann,et al.  Object-oriented nonlinear finite element programming: a primer , 2000 .

[184]  John W. Baugh,et al.  Data Abstraction in Engineering Software Development , 1992 .

[185]  Herman Deconinck,et al.  Object‐oriented three‐dimensional hybrid grid generation , 2003 .

[186]  Ganesh Subbarayan,et al.  Decomposition Techniques for the Efficient Analysis of Area-Array Packages , 2000 .

[187]  Michael Burghardt,et al.  Time-Dependent Three-Dimensional Finite-Element Ground Model for Geotechnical Engineering Problems , 2000 .

[188]  Hiroshi Takeda,et al.  Nonlinear Finite Element Analysis Using Object-Oriented Approach , 1995 .

[189]  Roman Wyrzykowski,et al.  Object-Oriented Approach to Finite Element Modeling on Clusters , 2000, PARA.

[190]  Wenqing Wang,et al.  Object-oriented programming in boundary element methods using C++ , 1999 .

[191]  Shigeru Nagasawa,et al.  Support system for finite element analysis , 1996 .

[192]  Wilfried B. Krätzig,et al.  Object-Oriented Finite Element Modeling , 1993 .

[193]  Robert Ian Mackie.  Objects and finite elements: an holistic approach to computational speed issues , 1998 .

[194]  Ashfaque Ahmed Chowdhury.  An object oriented finite element formulation for construction simulation, PhD dissertation, December 1993 110 p. , 1993 .

[195]  R. M. Harris,et al.  A CAD architecture for microelectromechanical systems , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[196]  Jon Trevelyan,et al.  Interactive re-analysis in mechanical design evolution. Part I. Background and implementation , 2001 .

[197]  Alberto Cardona,et al.  Design of a new finite element programming environment , 1994 .

[198]  P. Tauzowski,et al.  Sensitivity analysis for viscoelastic bodies in object-oriented finite element environment , 2003 .

[199]  J. Friedrich.  The advantages of object-oriented modelling for BEM coding demonstrated for 2D Laplace, Poisson, and diffusion problems using dual reciprocity methodology , 1970 .

[200]  Hans Petter Langtangen,et al.  A unified mesh refinement method with applications to porous media flow , 1998 .

[201]  Olivier Pantalé.  An object-oriented programming of an explicit dynamics code: application to impact simulation , 2002 .

[202]  Dominique Eyheramendy,et al.  Programmation orientée objet appliquée à la méthode des éléments finis : dérivations symboliques, programmation automatique , 1995 .

[203]  Kenneth Runesson,et al.  Object-Oriented Approach to Hyperelasticity , 1999, Engineering with Computers.

[204]  Genki Yagawa,et al.  Automatic two- and three-dimensional mesh generation based on fuzzy knowledge processing , 1990 .

[205]  Jun Lu,et al.  Applying object-oriented design to finite element programming , 1993, SAC '93.

[206]  Graham C. Archer,et al.  A new object-oriented finite element analysis program architecture , 1999 .

[207]  Philippe R.B. Devloo,et al.  Object oriented design philosophy for scientific computing , 2002 .

[208]  W. Craig Carter,et al.  Effect of interface properties on microcracking of iron titanate , 1998 .

[209]  Shang-Hsien Hsieh,et al.  Distributed finite element computations using object-oriented techniques , 2005, Engineering with Computers.

[210]  O. Wallrapp.  Flexible Bodies in Multibody System Codes , 1998 .

[211]  Philippe Remy Bernard Devloo,et al.  OBJECT ORIENTED PROGRAMMING IN SCIENTIFIC COMPUTATIONS: THE BEGINNING OF A NEW ERA , 1991 .

[212]  Jacques Besson,et al.  Large scale object-oriented finite element code design , 1997 .

[213]  S. Banerjee,et al.  A FRAMEWORK FOR INTERACTIVE COMPUTATIONAL ANALYSIS IN GEOMECHANICS , 1995 .

[214]  Takahiko Tanahashi,et al.  Discrete Del Operator for Object-Oriented FEM. , 1996 .

[215]  Hiroko O. Ueda,et al.  An Object-Oriented Design of Electromagnetic Wave Simulator for Multi Schemes , 2001 .

[216]  Graham C. Archer,et al.  A DISTRIBUTED OBJECT-ORIENTED FINITE-ELEMENT ANALYSIS PROGRAM ARCHITECTURE , 2001 .

[217]  Andrew S. Grimshaw,et al.  Parallel Object-Oriented Computation Applied to a Finite Element Problem , 1993, Sci. Program..

[218]  Lauri Kettunen,et al.  Maxwell equations and finite element software systems: object-oriented coding needs well defined objects , 2000 .

[219]  J. C. Gelin,et al.  Object oriented programming applied to the domain decomposition methods with load balancing for the numerical simulation forging processes , 2000 .

[220]  Hideo Kobayashi,et al.  Application of Genetic Algorithms to Stiffness Optimization of Laminated Composite Plates with Stress-Concentrated Open Holes , 1995 .

[221]  R.M.V. Pidaparti,et al.  Dynamic analysis of structures using object-oriented techniques , 1993 .

[222]  M. U. Hosain,et al.  Finite-Element Graphic Objects in C++ , 1996 .

[223]  C. Fernando.  An efficient computer aided engineering tool using hybrid numerical techniques , 2003, Proceedings of the 35th Southeastern Symposium on System Theory, 2003..

[224]  Jaroslav Mackerle,et al.  2D and 3D finite element meshing and remeshing - A bibliography (1990-2001) , 2001 .

[225]  Donald W. White,et al.  Frameview: Object-Oriented Visualization System for Frame Analysis , 1996 .

[226]  Kjell Orsborn,et al.  Applying Next Generation Object-Oriented DBMS to Finite Element Analysis , 1994, ADB.

[227]  Hojjat Adeli,et al.  An integrated computing environment for solution of complex engineering problems using the object-oriented programming paradigm and a blackboard architecture , 1995 .

[228]  Gregory L. Fenves,et al.  Object-oriented finite element programming: frameworks for analysis, algorithms and parallel computing , 1997 .

[229]  R. Roitzsch,et al.  KASKADE 3.0 - An Object Oriented Adaptive Finite Element Code , 1995 .

[230]  John R. Hauser,et al.  Panel session: future directions and challenges for Java implementations of numeric-intensive industrial applications , 2000 .

[231]  O. Hededal.  Object-Oriented Structuring of Finite Elements , 1994 .

[232]  S. K. Krzeminski,et al.  Numerical analysis of peristaltic MHD flows , 2000 .

[233]  Stephanus Büttgenbach,et al.  BICEPS: a modular environment for the design of micromachined silicon devices , 2000 .

[234]  Paul D. Bates,et al.  Development of one, two and three-dimensional finite element groundwater models within a generalized object-oriented framework. , 2000 .

[235]  Robert Ian Mackie.  An object-oriented approach to calculation control in finite element programs , 2000 .

[236]  Robert Ian Mackie.  Using objects to handle calculation control in finite element modelling , 2002 .

[237]  Mario A. Storti,et al.  A parallel finite element program on a Beowulf cluster , 2000 .

[238]  Ted Belytschko,et al.  Object-oriented parallelization of explicit structural dynamics with PVM , 1998 .

[239]  Jack L. Beuth,et al.  Development of an Object-Oriented Fatigue Tool , 2000, Engineering with Computers.

[240]  Jacques Besson,et al.  Object-Oriented Programming Applied to the Finite Element Method Part II. Application to Material Behaviors , 1998 .

[241]  Bořek Patzák,et al.  Design of object oriented finite element code , 2001 .

[242]  Robert Ian Mackie,et al.  Object-oriented finite element programming—the importance of data modelling , 1999 .

[243]  Yoshisada Murotsu,et al.  Object-oriented approach to modeling and analysis of truss structures , 1995 .

[244]  K. Ravi-Chandar,et al.  Influence of Surface Residual Stress State on Crack Path Evolution in Polycrystalline Alumina , 2004 .

[245]  Semyung Wang,et al.  Topology optimization of nonlinear magnetostatics , 2002 .

[246]  P. Trompette,et al.  Generic data structures dedicated to integrated structural design , 1996 .

[247]  Oskar Wallrapp,et al.  Standardization of flexible body modeling in multibody system codes , 1994 .

[248]  Rafael Montenegro,et al.  An object oriented method for tetrahedral mesh refinement , 2002 .

[249]  Pierre Pegon,et al.  Improving modularity in object-oriented finite element programming , 1997 .

[250]  Rajiv Sampath,et al.  An object oriented implementation of a front tracking finite element method for directional solidification processes , 1999 .

[251]  Enrico Bertolazzi,et al.  Algorithm 817: P2MESH: generic object-oriented interface between 2-D unstructured meshes and FEM/FVM-based PDE solvers , 2002, TOMS.

[252]  M. Kleiber,et al.  Parameter sensitivity formulation for viscoelastic structures , 1999 .

[253]  Anders Olsson,et al.  An object-oriented implementation of structural path-following , 1998 .

[254]  Semyung Wang,et al.  Shape optimization of BLDC motor using 3-D finite element method , 2000 .

[255]  B. Meys,et al.  An object-oriented decomposition of the FE procedure , 1996 .

[256]  Per Kettil.  Computational Engineering Development and Implementation of Computational Methods for Structural Analysis and Design , 2001 .

[257]  Andrew Koenig.  Arithmetic Sequence Iterators , 1996, J. Object Oriented Program..

[258]  R. M. V. Pidaparti,et al.  Analysis of truss structures using distributed object-oriented methods , 1996 .

[259]  Kai Cheng,et al.  An integrated concurrent engineering approach to the design and manufacture of complex components , 2002 .

[260]  Hideomi Ohtsubo,et al.  Development of the object-oriented finite element modeling system — MODIFY , 2005, Engineering with Computers.

[261]  J. Friedrich.  Object-Oriented Computer Simulations of Physical Systems Using Dual Reciprocity Boundary Element Methodology , 1998 .

[262]  T. Breitfeld,et al.  An expert system for the verification of finite-element calculations , 1996, Proceedings of the Fourth International Symposium on Assessment of Software Tools.

[263]  Willy Legros,et al.  A General Element Structure for Finite Element Programmes , 1995 .

[264]  Ryoji Yuuki,et al.  BEM解析支援エキスパートシステムの開発 : 第1報 オブジェクト指向知識表現を用いたBEMモデリング , 1991 .

[265]  X.-A. Kong.  A data design approach for object-oriented FEM programs , 1996 .

[266]  Genki Yagawa,et al.  Automated structural design based on knowledge engineering and fuzzy control , 1995 .

[267]  Johan Hoffman.  Computational Modeling of Complex Flows , 2002 .

[268]  Pedro Arduino,et al.  Localized tensor-based solvers for interactive finite element applications using C++ and Java , 2003 .

[269]  Christian Lage.  The application of object-oriented methods to boundary elements , 1998 .

[270]  Roland W. Lewis,et al.  FEView: an interactive visualization tool for finite elements , 1995 .

[271]  Jacques Besson,et al.  An object-oriented simulation–optimization interface , 2003 .

[272]  Graham F. Carey,et al.  A class of data structures and object-oriented implementation for finite element methods on distributed memory systems , 1999 .

[273]  F. J. Lingen.  Design of an object oriented Finite Element package for parallel computers , 2000 .

[274]  Pierre Pegon,et al.  Linear Constraints in Object-Oriented Finite Element Programming. , 1998 .

[275]  Ricardo O. Foschi,et al.  Object-oriented finite element analysis , 1990 .

[276]  Gregory R. Miller,et al.  An object-oriented approach to structural analysis and design , 1991 .

[277]  Pierre Pegon,et al.  Object-oriented programming in nonlinear finite element analysis , 1998 .

[278]  Akira Todoroki,et al.  Object-Oriented Approach to Optimize Composite Laminated Plate Stiffness with Discrete Ply Angles , 1996 .

[279]  H. Adeli,et al.  OBJECT-ORIENTED FINITE ELEMENT ANALYSIS USING EER MODEL , 1993 .

[280]  Grady Booch,et al.  Object-oriented analysis and design with applications (2nd ed.) , 1993 .

[281]  R. Robert Gajewski,et al.  Object-oriented approach to the reduction of matrix bandwidth, profile and wavefront , 1999 .

[282]  Richard D. Hale,et al.  OBJECT-ORIENTED IMPLEMENTATION OF AN INTEGRATED DESIGN AND ANALYSIS TOOL FOR FIBER PLACED STRUCTURES , 2002 .

[283]  David Ellis Barker.  An object-oriented hierarchical paradigm for integrated parametric design and automated two-dimensional quadrilateral mesh generation , 1993 .

[284]  Robert Ian Mackie.  Object-Oriented Methods and Finite Element Analysis , 2002 .

[285]  Andrew Deeks.  An Adaptive H-Hierarchical finite element system , 1998 .

[286]  Frédéric Feyel,et al.  Some new technics regarding the parallelisation of ZéBuLoN, an object oriented finite element code for structural mechanics , 2002 .

[287]  Masahiro Tatsumi,et al.  Object-Oriented Three-Dimensional Fine-Mesh Transport Calculation on Parallel/Distributed Environments for Advanced Reactor Core Analyses , 2002 .

[288]  Achim Basermann,et al.  Head-mechanical simulations with SimBio : Bioinformatics , 2002 .

[289]  Marco Lúcio Bittencourt,et al.  An object-oriented structural optimization program , 2000 .

[290]  Dominique Eyheramendy,et al.  Aspects of an object-oriented finite element environment , 1998 .

[291]  Allen C. Robinson,et al.  Development of Generic Field Classes for Finite Element and Finite Difference Problems , 1993, Sci. Program..

[292]  Jonathan A. Dantzig,et al.  Implementation of design sensitivity analysis and numerical optimization in engineering analysis , 1996 .

[293]  Evandro Parente,et al.  On evaluation of shape sensitivities of non‐linear critical loads , 2003 .

[294]  W. Craig Carter,et al.  Residual‐Stress Predictions in Polycrystalline Alumina , 2001 .

[295]  M. Sheehy,et al.  An object-oriented blackboard based approach for automated finite element modeling and analysis of multichip modules , 2005, Engineering with Computers.

[296]  Martin J. Gander,et al.  ALAMODE: A Layered Model Development Environment , 1995 .