A multi-physics process model for simulating the manufacture of resin-infused composite aerostructures

Abstract The increasing demand for large, complex and low-cost composite aerostructures has motivated advances in the simulation of liquid composite moulding techniques with textile reinforcement materials. This work outlines the development and validation of a multi-physics process model that better simulates infusion behaviour through a complex preform compared with traditional models used in industry that do not account for fabric deformation. By combining the results of a preform draping model with deformation-dependent permeability properties, the shape and local flow characteristics of a deformed textile reinforcement have been more realistically defined for infusion. Simulated shear deformation results were used to define the distributed permeability properties across the fabric domain of the infusion model. Full-scale vacuum infusion experiments were conducted for a complex double dome geometry using a plain weave carbon fibre material. The multi-physics process model showed significant improvement over basic models, since it is able to account for the change in flow behaviour that results from local fabric deformation.

[1]  Xiongqi Peng,et al.  Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulation , 2011 .

[2]  João M.P.Q. Delgado,et al.  Numerical Analysis of Heat and Mass Transfer in Porous Media , 2012 .

[3]  Andrew C. Long,et al.  Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments , 2004 .

[4]  Enivaldo Santos Barbosa,et al.  Resin Transfer Molding Process: Fundamentals, Numerical Computation and Experiments , 2012 .

[5]  John Summerscales,et al.  Resin Infusion under Flexible Tooling (RIFT): a review , 1996 .

[6]  R. A. Shenoi,et al.  Measurement of three dimensional permeability , 1998 .

[7]  Berend van Wachem,et al.  Volume of fluid methods for immiscible-fluid and free-surface flows , 2008 .

[8]  P. Potluri,et al.  Measurement of meso-scale shear deformations for modelling textile composites , 2006 .

[9]  Xiongqi Peng,et al.  Textile composite double dome stamping simulation using a non-orthogonal constitutive model , 2011 .

[10]  Stepan Vladimirovitch Lomov,et al.  Experimental determination of the permeability of engineering textiles:Benchmark II , 2014 .

[11]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[12]  Ignace Verpoest,et al.  Textile composites: modelling strategies , 2000 .

[13]  Brian Falzon,et al.  Permeability characterization of sheared carbon fiber textile preform , 2018 .

[14]  Ignace Verpoest,et al.  Permeability prediction for the meso–macro coupling in the simulation of the impregnation stage of Resin Transfer Moulding , 2010 .

[15]  P. Ermanni,et al.  The in-plane permeability of sheared textiles. Experimental observations and a predictive conversion model , 2004 .

[16]  Damien Durville,et al.  Simulation of the mechanical behaviour of woven fabrics at the scale of fibers , 2010 .

[17]  M. Thompson,et al.  Implementation of a Non-Orthogonal Constitutive Model for the Finite Element Simulation of Textile Composite Draping , 2014 .

[18]  Pierre Badel,et al.  Woven fabric permeability : From textile deformation to fluid flow mesoscale simulations , 2008 .

[19]  Emmanuelle Vidal-Salle,et al.  Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses , 2011 .

[20]  Pavel Simacek,et al.  The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites , 2012 .

[21]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[22]  Suresh G. Advani,et al.  Modeling resin flow and fiber tow saturation induced by distribution media collapse in VARTM , 2007 .

[23]  Romain Boman,et al.  A Low‐Cost Digital Image Correlation Technique for Characterising the Shear Deformation of Fabrics for Draping Studies , 2015 .

[24]  M. F. Culpin.  8—THE SHEARING OF FABRICS: A NOVEL APPROACH , 1979 .

[25]  Suresh G. Advani,et al.  Desirable features in mold filling simulations for Liquid Composite Molding processes , 2004 .

[26]  Gilles Hivet,et al.  Analyses of fabric tensile behaviour: determination of the biaxial tension–strain surfaces and their use in forming simulations , 2001 .

[27]  James A. Sherwood,et al.  Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results , 2008 .

[28]  Gilbert Lebrun,et al.  Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics , 2003 .

[29]  W. Lee,et al.  Modeling and simulation of voids and saturation in liquid composite molding processes , 2011 .

[30]  V. Michaud,et al.  Experimental determination of the permeability of textiles: A benchmark exercise , 2011 .

[31]  Piaras Kelly,et al.  Simulation of the reinforcement compaction and resin flow during the complete resin infusion process , 2010 .

[32]  P. Potluri,et al.  Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics , 2012 .

[33]  Andrew C. Long,et al.  Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture , 2006 .

[34]  Dennis A. Siginer,et al.  Permeability Measurement Methods in Porous Media of Fiber Reinforced Composites , 2010 .

[35]  F. Trochu,et al.  Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites , 2006 .

[36]  Gilles Hivet,et al.  Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape , 2011 .

[37]  X. Tao,et al.  Large deformation and slippage mechanism of plain woven composite in bias extension , 2007 .

[38]  P. Boisse,et al.  Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour: Application to the double dome benchmark , 2010 .

[39]  Suresh G. Advani,et al.  Fluid Impregnation of Deformed Preforms , 2000 .

[40]  Andrew C. Long,et al.  Modelling variation of textile fabric permeability at mesoscopic scale , 2006 .