Thin film GaAs solar cells, separated from their substrate using the weight-induced epitaxial lift-off technique, were compared with conventional cells on a substrate. The thin film cells can be illuminated from both sides using a mirror. The thickness of the p-type GaAs layer, which is the base layer for front illumination and the emitter layer for rear illumination, was varied between 0.25 and 2.5 mum. For both front and rear illumination, the cell efficiency shows a maximum at a thickness of 1.5 mum. The rear illuminated cell current is only 10% lower than for front illumination. Light reflection in the thin film cell enhances the external quantum efficiency and the collection efficiency in the higher wavelength region from 0.84 to 0.90 and from 0.82 to 0.95, respectively. (C) 2003 Elsevier B.V. All rights reserved.
[1]
G. J. Bauhuis,et al.
Influence of radius of curvature on the lateral etch rate of the weight induced epitaxial lift-off process
,
2002
.
[2]
G. J. Bauhuis,et al.
Epitaxial lift-off GaAs solar cell from a reusable GaAs substrate
,
1997
.
[3]
E. J. Haverkamp,et al.
High rate epitaxial lift-off of InGaP films from GaAs substrates
,
2000
.
[4]
E. Yablonovitch,et al.
Extreme selectivity in the lift‐off of epitaxial GaAs films
,
1987
.
[5]
O. Heavens.
Thin film physics
,
1970
.
[6]
S. Lau,et al.
On the low resistance Au/Ge/Pd ohmic contact to n-GaAs
,
1996
.