Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation

[1]  M. Zha,et al.  Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process , 2021 .

[2]  Huiyuan Wang,et al.  Effect of trace Cr alloying on centerline segregations in sub-rapid solidified Al–Mg–Si (AA6061) alloys fabricated by twin-roll casting , 2021 .

[3]  D. Fu,et al.  Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach , 2021, Journal of Materials Science & Technology.

[4]  H. Kotadia,et al.  Effects of Fe, Mn, chemical grain refinement and cooling rate on the evolution of Fe intermetallics in a model 6082 Al-alloy , 2021, Intermetallics.

[5]  W. Poole,et al.  The effect of Mg and Si content on the microstructure, texture and bendability of Al–Mg–Si alloys , 2021 .

[6]  E. Pinilla-Gil,et al.  Radon alpha track counting on solid state nuclear track detector by an ImageJ-based software macro. , 2021, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[7]  F. Qiu,et al.  Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting , 2021 .

[8]  Huiyuan Wang,et al.  Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling , 2021 .

[9]  M. Zha,et al.  Revealing the underlying mechanism of abnormal grain growth in sub-rapid solidified Al-Mg-Si-Fe alloy , 2021 .

[10]  P. Rometsch,et al.  Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content , 2020 .

[11]  Yun-lai Deng,et al.  Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified , 2020 .

[12]  Huiyuan Wang,et al.  Relieving segregation in twin-roll cast Mg–8Al–2Sn–1Zn alloys via controlled rolling , 2020 .

[13]  W. Cheng,et al.  Effects of base metal state on the microstructure and mechanical properties of Al–Mg–Si alloy friction stir-welded joints , 2020 .

[14]  Hongbing Wang,et al.  Effect of Mn/Fe ratio on the microstructure and properties of 6061 sheets obtained by twin-roll cast , 2020 .

[15]  Z. D. Wang,et al.  Improvement of Spatial Inhomogeneity of Solute Elements and Mechanical Properties of Twin-Roll Cast Al-Mg-Si Alloy in Presence of Electromagnetic Fields , 2020, JOM.

[16]  M. Zha,et al.  Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification , 2020 .

[17]  Guangming Xu,et al.  A Novel Approach to Improve the Microstructure and Mechanical Properties of Al–Mg–Si Aluminum Alloys during Twin-Roll Casting , 2020, Materials.

[18]  O. Engler,et al.  A modified processing route for high strength Al-Mg-Si aluminum conductors based on twin-roll cast strip , 2020 .

[19]  Kun Liu,et al.  Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys , 2020, Journal of Materials Science & Technology.

[20]  Jinyu Fu,et al.  Evolution of microstructure and properties of novel aluminum‑lithium alloy with different roll casting process parameters during twin-roll casting , 2020 .

[21]  Yun-lai Deng,et al.  Eliminating microstructural defects and improving the mechanical and fatigue properties of an Al–Mg–Si alloy extrusion by optimising homogenisation , 2019, Materials Science and Engineering: A.

[22]  T. Jiang,et al.  Effects of different external fields on the microstructure and mechanical properties of novel Al Cu Li alloy during twin-roll casting , 2019, Materials Science and Engineering: A.

[23]  Wei Song,et al.  Interactions between Fe-rich intermetallics and Mg-Si phase in Al-7Si-xMg alloys , 2019, Journal of Alloys and Compounds.

[24]  C. Hutchinson,et al.  Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity , 2019, Science.

[25]  Hyoung-Wook Kim,et al.  Deformation-induced center segregation in twin-roll cast high-Mg Al–Mg strips , 2018, Scripta Materialia.

[26]  K. Marthinsen,et al.  The effect of alloying elements on the ductility of Al-Mg-Si alloys , 2017 .

[27]  N. Provatas,et al.  Cluster evolution mechanisms during aging in Al–Mg–Si alloys , 2016 .

[28]  Z. Fan,et al.  The impact of melt conditioning on microstructure, texture and ductility of twin roll cast aluminium alloy strips , 2016 .

[29]  Byeong-Chan Suh,et al.  Segregation in twin-roll cast Mg alloy and its suppression through alloy design , 2014 .

[30]  B. Dhindaw,et al.  Twin-Roll Casting of Aluminum Alloys – An Overview , 2014 .

[31]  F. Gao,et al.  Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys , 2013 .

[32]  H. Watari,et al.  Effect of Si on AA5182 Strip Cast by a High Speed Twin Roll Caster , 2012 .

[33]  J. Seol,et al.  Effect of the rolling speed on microstructural and mechanical properties of aluminum―magnesium alloys prepared by twin roll casting , 2010 .

[34]  Y. Birol.  Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves , 2009 .

[35]  M. Kaufman,et al.  The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys , 2008 .

[36]  Nobuhiro Koga,et al.  Feasibility study of twin roll casting process for magnesium alloys , 2007 .