Influence of the porosity of starch-based fiber mesh scaffolds on the proliferation and osteogenic differentiation of bone marrow stromal cells cultured in a flow perfusion bioreactor.

This study investigates the influence of the porosity of fiber mesh scaffolds obtained from a blend of starch and poly(epsilon-caprolactone) on the proliferation and osteogenic differentiation of marrow stromal cells cultured under static and flow perfusion conditions. For this purpose, biodegradable scaffolds were fabricated by a fiber bonding method into mesh structures with two different porosities-- 50 and 75%. These scaffolds were then seeded with marrow stromal cells harvested from Wistar rats and cultured in a flow perfusion bioreactor or in 6-well plates for up to 15 days. Scaffolds of 75% porosity demonstrated significantly enhanced cell proliferation under both static and flow perfusion culture conditions. The expression of alkaline phosphatase activity was higher in flow cultures, but only for cells cultured onto the higher porosity scaffolds. Calcium deposition patterns were similar for both scaffolds, showing a significant enhancement of calcium deposition on cellscaffold constructs cultured under flow perfusion, as compared to static cultures. Calcium deposition was higher in scaffolds of 75% porosity, but this difference was not statistically significant. Observation by scanning electron microscopy showed the formation of pore-like structures within the extracellular matrix deposited on the higher porosity scaffolds. Fourier transformed infrared spectroscopy with attenuated total reflectance and thin-film X-ray diffraction analysis of the cell-scaffold constructs after 15 days of culture in a flow perfusion bioreactor revealed the presence of a mineralized matrix similar to bone. These findings indicate that starch-based scaffolds, in conjunction with fluid flow bioreactor culture, minimize diffusion constraints and provide mechanical stimulation to the marrow stromal cells, leading to enhancement of differentiation toward development of bone-like mineralized tissue. These results also demonstrate that the scaffold structure, namely, the porosity, influences the sequential development of osteoblastic cells and, in combination with the culture conditions, may affect the functionality of tissues formed in vitro.

[1]  C. V. van Blitterswijk,et al.  Incorporation of bovine serum albumin in calcium phosphate coating on titanium. , 1999, Journal of biomedical materials research.

[2]  Gordana Vunjak-Novakovic,et al.  CHAPTER 13 – TISSUE ENGINEERING BIOREACTORS , 2000 .

[3]  D L Butler,et al.  Functional tissue engineering: the role of biomechanics. , 2000, Journal of biomechanical engineering.

[4]  A. Mikos,et al.  Review: tissue engineering for regeneration of articular cartilage. , 2000, Biomaterials.

[5]  Antonios G Mikos,et al.  Effect of flow perfusion on the osteogenic differentiation of bone marrow stromal cells cultured on starch-based three-dimensional scaffolds. , 2003, Journal of biomedical materials research. Part A.

[6]  Antonios G Mikos,et al.  Evaluation of the in vitro degradation of macroporous hydrogels using gravimetry, confined compression testing, and microcomputed tomography. , 2002, Biomacromolecules.

[7]  S. Cowin On mechanosensation in bone under microgravity. , 1998, Bone.

[8]  A. Mikos,et al.  Effect of convection on osteoblastic cell growth and function in biodegradable polymer foam scaffolds. , 2001, Biomaterials.

[9]  G. Stein,et al.  Concepts of osteoblast growth and differentiation: basis for modulation of bone cell development and tissue formation. , 1992, Critical reviews in oral biology and medicine : an official publication of the American Association of Oral Biologists.

[10]  K. Leong,et al.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.

[11]  Antonios G. Mikos,et al.  Mineralized matrix deposition by marrow stromal osteoblasts in 3D perfusion culture increases with increasing fluid shear forces , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[12]  Vassilios Sikavitsas,et al.  Tissue Engineering Bioreactors , 2006 .

[13]  P. Kumta,et al.  Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces. , 2000, Journal of biomedical materials research.

[14]  T. Ma,et al.  Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds. , 2001, Biomaterials.

[15]  C. Maniatopoulos,et al.  Bone formation in vitro by stromal cells obtained from bone marrow of young adult rats , 1988, Cell and Tissue Research.

[16]  Junzo Tanaka,et al.  Application of perfusion culture system improves in vitro and in vivo osteogenesis of bone marrow-derived osteoblastic cells in porous ceramic materials. , 2003, Tissue engineering.

[17]  Antonios G. Mikos,et al.  Fluid flow increases mineralized matrix deposition in 3D perfusion culture of marrow stromal osteoblasts in a dose-dependent manner , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[18]  寺井 秀富 In vitro engineering of bone using a rotational oxygen-permeable bioreactor system , 2002 .

[19]  Antonios G. Mikos,et al.  TISSUE ENGINEERING FOR REGENERATION OF ARTICULAR CARTILAGE , 2000 .

[20]  A. Boskey Biomineralization: Conflicts, challenges, and opportunities , 1998, Journal of cellular biochemistry.

[21]  Antonios G. Mikos,et al.  Pore Morphology Effects on the Fibrovascular Tissue Growth in Porous Polymer Substrates , 1994, Cell transplantation.

[22]  S. Mann Biomineralization: Principles and Concepts in Bioinorganic Materials Chemistry , 2002 .

[23]  David J Mooney,et al.  Salt fusion: an approach to improve pore interconnectivity within tissue engineering scaffolds. , 2002, Tissue engineering.

[24]  V. Sikavitsas,et al.  Biomaterials and bone mechanotransduction. , 2001, Biomaterials.

[25]  D. Mooney,et al.  Engineered bone development from a pre-osteoblast cell line on three-dimensional scaffolds. , 2000, Tissue engineering.

[26]  C T Laurencin,et al.  Bone tissue engineering in a rotating bioreactor using a microcarrier matrix system. , 2001, Journal of biomedical materials research.

[27]  Antonios G Mikos,et al.  Design of a flow perfusion bioreactor system for bone tissue-engineering applications. , 2003, Tissue engineering.

[28]  P. Ma,et al.  Biodegradable polymer scaffolds with well-defined interconnected spherical pore network. , 2001, Tissue engineering.