How Good Is Your Tag?: RFID Backscatter Metrics and Measurements

Passive ultra-high-frequency (UHF) radio-frequency identification (RFID) has developed rapidly over the past two decades. In 2012 alone, about 4 billion tags were sold worldwide [1]. Manufacture and deployment at this volume has been made possible by minimizing tag cost, making a strong disincentive for the added expense of RF performance testing. As a result, performance metrics and test methods are not yet unified or generally adopted. Large customers in industry and government, however, wish to compare products with parameters like read range and inventory rate, so this problem is attracting more attention, and test standards are improving. This article discusses the history, state of the art, and some future challenges in this rapidly evolving area of study. In particular, we consider two metrics for digitally modulated backscatter of passive UHF RFID tags and how tests can be simplified for reduced costs. Examples for some 860-960 MHz commercial tags and applications are given to illustrate the method.

[1]  Pavel Nikitin,et al.  Differential RCS of RFID tag , 2007 .

[2]  G. Marrocco,et al.  RFID Grids: Part II—Experimentations , 2011, IEEE Transactions on Antennas and Propagation.

[3]  J. Bolomey,et al.  A planar microwave breast imaging system based on the modulated scattering technique , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[4]  S. Tedjini,et al.  Determination of measurement uncertainties applied to the RCS and the differential RCS of UHF passive RFID tags , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[5]  H. Stockman,et al.  Communication by Means of Reflected Power , 1948, Proceedings of the IRE.

[6]  G Marrocco,et al.  RFID Grids: Part I—Electromagnetic Theory , 2011, IEEE Transactions on Antennas and Propagation.

[7]  David R. Novotny,et al.  Forward and reverse link constraints in UHF RFID with passive tags , 2010, 2010 IEEE International Symposium on Electromagnetic Compatibility.

[8]  D. R. Novotny,et al.  Simple Test and Modeling of RFID Tag Backscatter , 2012, IEEE Transactions on Microwave Theory and Techniques.

[9]  J. H. Richmond,et al.  A Modulated Scattering Technique for Measurement of Field Distributions , 1955 .

[10]  S. Tedjini,et al.  On the measurement of the delta Radar Cross Section (ΔRCS) for UHF tags , 2009, 2009 IEEE International Conference on RFID.

[11]  D. R. Novotny,et al.  Baseband Signals and Power in Load-Modulated Digital Backscatter , 2012, IEEE Antennas and Wireless Propagation Letters.

[12]  Zoya Popovic,et al.  Reference modulation for calibrated measurements of tag backscatter , 2011, 2011 IEEE International Conference on RFID.

[13]  D. R. Novotny,et al.  A reference modulated scatterer for ISO18000-6 UHF tag testing , 2012, IEEE Electromagnetic Compatibility Magazine.

[14]  Jean-Charles Bolomey,et al.  Engineering applications of the modulated scatterer technique , 2001 .

[15]  J. H. Van Vleck,et al.  Theory of Radar Reflection from Wires or Thin Metallic Strips , 1947 .

[16]  Lluis Jofre,et al.  Electromagnetic Modeling of RFID-Modulated Scattering Mechanism. Application to Tag Performance Evaluation , 2010, Proceedings of the IEEE.