论文信息 - SYSTEM IDENTIFICATION TEST USING ACTIVE MEMBERS - 字舞流文

SYSTEM IDENTIFICATION TEST USING ACTIVE MEMBERS

Using the step sine testing technique, the frequency response functions are obtained and the modal parameters are extracted by the curve-fitting method. A total of 10 global modes and 3 local modes are obtained.

Jay-Chung Chen | James L. Fanson

[1] J. A. Garba,et al. Experimental studies of active members in control of large space structures , 1988 .

[2] Richard C. Stroud,et al. An Evaluation of Excitation and Analysis Methods for Modal Testing , 1976 .

[3] Ben K. Wada,et al. Sine dwell or broadband methods for modal testing , 1988 .

[4] J.-C. Chen. Evaluation of modal testing methods , 1984 .

[5] E. Crawley,et al. Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[6] J. Canavin,et al. Control technology for large space structures , 1978 .

[7] Robert L. Forward,et al. Electronic damping of vibrations in optical structures. , 1979, Applied optics.

[8] Jay-Chung Chen. Evaluation of spacecraft modal test methods , 1987 .

[9] J. L. Fanson,et al. Active-member control of precision structures , 1989 .

[10] J. Chen,et al. On-orbit damage assessment for large space structures , 1988 .

[11] J. L. Fanson,et al. Positive position feedback control for large space structures , 1990 .

[12] Kenichi Takahara,et al. VIBRATION CONTROL OF TRUSS BEAM STRUCTURES USING AXIAL FORCE ACTUATORS , 1988 .

[13] J. Chen,et al. Response of large space structures with stiffness control , 1984 .