Vaporizing foil actuator welding as a competing technology to magnetic pulse welding

[1]  Y. Zhang.  Investigation of Magnetic Pulse Welding on Lap Joint of Similar and Dissimilar Materials , 2010 .

[2]  Charlotte Beerwald,et al.  Design and Adaptation of EMF Equipment - From Direct Acting Multi-turn Coils to Separable Tool Coils for Electromagnetic Tube Compression , 2004 .

[3]  Glenn S. Daehn,et al.  A uniform pressure electromagnetic actuator for forming flat sheets , 2007 .

[4]  Xiaohua Jiang,et al.  Relationships between Bridge Foil Parameters and Input Pulse Current , 2012 .

[5]  W. M. Lee,et al.  Pressure measurements correlated with electrical explosion of metals in water , 1988 .

[6]  J. E. Osher,et al.  Operating characteristics and modeling of the LLNL 100-kV electric gun , 1989 .

[7]  D. Mcdaniel,et al.  Effect of current rate on energy deposition into exploding metal wires in vacuum , 2004 .

[8]  R. C. Weingart,et al.  Electric gun: a versatile tool for high‐pressure shock‐wave research , 1980 .

[9]  S. A. Mousavi,et al.  Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel , 2009 .

[10]  J. B. Martin,et al.  MODE APPROXIMATIONS FOR IMPULSIVELY LOADED RIGID PLASTIC STRUCTURES , 1965 .

[11]  Joseph R. Davis,et al.  Special Features of Structure Formation and Properties of Special High-Alloy Alloys of the Al – Si – Cu System , 2023, Metal Science and Heat Treatment.

[12]  G. Mesyats,et al.  The current density and the specific energy input in fast electrical explosion , 1999 .

[13]  L. S. Nelson,et al.  Aluminum-Enhanced Underwater Electrical Discharges for Steam Explosion Triggering , 1999 .

[14]  Anupam Vivek,et al.  Coupling Experiment and Simulation in Electromagnetic Forming Using Photon Doppler Velocimetry , 2008 .

[15]  Wim De Waele,et al.  MAGNETIC PULSE WELDING: LESSONS TO BE LEARNED FROM EXPLOSIVE WELDING , 2011 .

[16]  V. Shribman.  Magnetic Pulse Welding for Dissimilar and Similar Materials , 2008 .

[17]  M. Levine,et al.  Classification of Wire Explosions , 1960 .

[18]  Jianheng Zhao,et al.  Magnetohydrodynamics of Metallic Foil Electrical Explosion and Magnetically Driven Quasi-Isentropic Compression , 2011 .

[19]  Glenn S. Daehn,et al.  Impact Welding in a Variety of Geometric Configurations , 2010 .

[20]  David R. Goosman,et al.  Velocimetry using heterodyne techniques , 2004, International Congress on High-Speed Imaging and Photonics.

[21]  R. Sarathi,et al.  STUDIES ON GENERATION AND CHARACTERIZATION OF NANOALUMINA POWDER USING WIRE EXPLOSION TECHNIQUE , 2004 .

[22]  Berndt Brenner,et al.  Insights into intermetallic phases on pulse welded dissimilar metal joints , 2010 .

[23]  Anupam Vivek,et al.  Vaporizing foil actuator used for impulse forming and embossing of titanium and aluminum alloys , 2014 .

[24]  Sachin D. Kore,et al.  Electromagnetic impact welding of Mg to Al sheets , 2009 .

[25]  Haiyang Zhou,et al.  Study on the driver plate for electromagnetic forming of titanium alloy Ti-6Al-4V , 2013 .

[26]  R. Bealing,et al.  Exploding foil devices for shaping meg-amp current pulses , 1972 .

[27]  X. Zou,et al.  Two different modes of wire explosion for nano-powder production , 2012 .

[28]  G. Daehn.  Energy Field Methods and Electromagnetic Sheet Metal Forming , 2010 .

[29]  Oren Sadot,et al.  Wave formation mechanism in magnetic pulse welding , 2010 .

[30]  T. Aizawa.  Magnetic pressure seam welding method for aluminium sheets , 2003 .

[31]  A. Tekkaya,et al.  Electromagnetic forming—A review , 2011 .

[32]  L. Loeb,et al.  Kinetic Theory of Gases , 2018, Foundations of Plasma Physics for Physicists and Mathematicians.

[33]  Fabrizio Micari,et al.  Joining by plastic deformation , 2013 .

[34]  A. N. Grigoriev,et al.  Pressure generated by the electric explosion of metal foils , 2009 .

[35]  Anupam Vivek,et al.  Vaporizing foil actuator: A tool for collision welding , 2013 .

[36]  A. Vivek,et al.  High strain rate metalworking with vaporizing foil actuator: control of flyer velocity by varying input energy and foil thickness. , 2014, The Review of scientific instruments.

[37]  A. Vivek,et al.  Accessing collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targets , 2014 .

[38]  Glenn S. Daehn,et al.  Uniform Pressure Electromagnetic Actuator – An Innovative Tool for Magnetic Pulse Welding☆ , 2014 .

[39]  Rowan Peter William Sinton.  Long Distance Exploding Wires , 2011 .

[40]  W. L. Seitz,et al.  An Empirical Model to Compute the Velocity Histories of Flyers Driven by Electrically Exploding Foils , 1977 .

[41]  D. D. Richardson,et al.  An Exploding Foil Flying Plate Generator , 1988 .

[42]  H. Pécseli.  Waves and Oscillations in Plasmas , 2012 .