Fractal dendrite-based electrically conductive composites for laser-scribed flexible circuits

Fractal metallic dendrites have been drawing more attentions recently, yet they have rarely been explored in electronic printing or packaging applications because of the great challenges in large-scale synthesis and limited understanding in such applications. Here we demonstrate a controllable synthesis of fractal Ag micro-dendrites at the hundred-gram scale. When used as the fillers for isotropically electrically conductive composites (ECCs), the unique three-dimensional fractal geometrical configuration and low-temperature sintering characteristic render the Ag micro dendrites with an ultra-low electrical percolation threshold of 0.97 vol% (8 wt%). The ultra-low percolation threshold and self-limited fusing ability may address some critical challenges in current interconnect technology for microelectronics. For example, only half of the laser-scribe energy is needed to pattern fine circuit lines printed using the present ECCs, showing great potential for wiring ultrathin circuits for high performance flexible electronics.

[1]  Shuangxi Xing,et al.  3D dendritic gold nanostructures: seeded growth of a multi-generation fractal architecture. , 2010, Chemical communications.

[2]  M. Ge,et al.  High conductivity of isotropic conductive adhesives filled with silver nanowires , 2006 .

[3]  Yi Li,et al.  Oxidation Prevention and Electrical Property Enhancement of Copper-Filled Isotropically Conductive Adhesives , 2007 .

[4]  H. Choi,et al.  Highly conductive, printable and stretchable composite films of carbon nanotubes and silver. , 2010, Nature nanotechnology.

[5]  R. L. Smith,et al.  Electron beam stimulated oxidation of carbon , 2009, Nanotechnology.

[6]  Yi Li,et al.  Electronics Without Lead , 2005, Science.

[7]  R. Kopclman.  Percolation and cluster distribution . I . Cluster multiple labeling technique and critical concentration algorithm , 2011 .

[8]  Tian,et al.  Multilayer relaxation of clean Ag{001} , 1991, Physical review. B, Condensed matter.

[9]  A. Gedanken,et al.  Synthesis of copper dendrite nanostructures by a sonoelectrochemical method. , 2008, Chemistry.

[10]  A. Eychmüller,et al.  Ultrasonically Assisted Synthesis of 3D Hierarchical Silver Microstructures , 2009 .

[11]  Deren Yang,et al.  Fabrication of flower-like silver structures through anisotropic growth. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[12]  G. Wertheim,et al.  X-Ray Photoelectron Spectroscopy , 1986 .

[13]  T. Someya,et al.  A Rubberlike Stretchable Active Matrix Using Elastic Conductors , 2008, Science.

[14]  Vikas Berry,et al.  Implantation and growth of dendritic gold nanostructures on graphene derivatives: electrical property tailoring and Raman enhancement. , 2009, ACS nano.

[15]  Ching-Ping Wong,et al.  Surface Functionalized Silver Nanoparticles for Ultrahigh Conductive Polymer Composites , 2006 .

[16]  Wei Lin,et al.  Preparation of highly conductive polymer nanocomposites by low temperature sintering of silver nanoparticles , 2010 .

[17]  Yang Shen,et al.  Physical Properties of Composites Near Percolation , 2010 .

[18]  G. Kresse,et al.  From ultrasoft pseudopotentials to the projector augmented-wave method , 1999 .

[19]  Zhenxing Chen,et al.  Flaky silver powders prepared with nanofilm transition method: application for printable electronics , 2013 .

[20]  M. Taya,et al.  Electrical and thermal conductivities of a silver flake/thermosetting polymer matrix composite , 2009 .

[21]  B. Lindeke.  The non- and postenzymatic chemistry of N-oxygenated molecules. , 1982, Drug metabolism reviews.

[22]  T. Someya,et al.  Stretchable active-matrix organic light-emitting diode display using printable elastic conductors. , 2009, Nature materials.

[23]  C. Minot,et al.  Effect of relaxation on structure and reactivity of anatase (1 0 0) and (0 0 1) surfaces , 2004 .

[24]  H. Cho,et al.  Enhancement of electrical and thermomechanical properties of silver nanowire composites by the introduction of nonconductive nanoparticles: experiment and simulation. , 2013, ACS nano.

[25]  Harvey Scher,et al.  Critical Density in Percolation Processes , 1970 .

[26]  R. Kaner,et al.  Flash welding of conducting polymer nanofibres , 2004, Nature Materials.

[27]  J. Qu,et al.  Plasmon-induced photodegradation of toxic pollutants with Ag-AgI/Al2O3 under visible-light irradiation. , 2010, Journal of the American Chemical Society.

[28]  P. Ma,et al.  Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes , 2007 .

[29]  Govind Paneru,et al.  Complete reconfiguration of dendritic gold. , 2014, Nanoscale.

[30]  M. Yuen,et al.  Printed electrically conductive composites: conductive filler designs and surface engineering , 2013 .

[31]  Roya Maboudian,et al.  Silver dendrites from galvanic displacement on commercial aluminum foil as an effective SERS substrate. , 2010, Journal of the American Chemical Society.

[32]  Yang Yang,et al.  Fabrication of Infrared Left‐Handed Metamaterials via Double Template‐Assisted Electrochemical Deposition , 2008 .

[33]  Yi Cui,et al.  Self-limited plasmonic welding of silver nanowire junctions. , 2012, Nature materials.

[34]  S. Redner,et al.  Introduction To Percolation Theory , 2018 .

[35]  Lu,et al.  Temperature dependent sign reversal of the surface contraction of Ag(111). , 1994, Physical review letters.

[36]  Xiaopeng Zhao.  Bottom-up fabrication methods of optical metamaterials , 2012 .

[37]  A. Yu,et al.  Galvanic replacement synthesis of silver dendrites-reduced graphene oxide composites and their surface-enhanced Raman scattering characteristics. , 2015, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[38]  Younan Xia,et al.  Crystalline Silver Nanowires by Soft Solution Processing , 2002 .

[39]  G. Kresse,et al.  Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set , 1996 .

[40]  Z. X. Zhang,et al.  The Sintering Behavior of Electrically Conductive Adhesives Filled with Surface Modified Silver Nanowires , 2011 .

[41]  W. Kohn,et al.  Self-Consistent Equations Including Exchange and Correlation Effects , 1965 .

[42]  Younan Xia,et al.  Shape-controlled synthesis of silver nanoparticles: Ab initio study of preferential surface coordination with citric acid , 2008 .

[43]  Smith,et al.  Equivalent-crystal theory of oscillatory surface relaxation. , 1988, Physical Review B (Condensed Matter).

[44]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[45]  Shouheng Sun,et al.  Cold welding of ultrathin gold nanowires. , 2010, Nature nanotechnology.

[46]  Michel Rappaz,et al.  Orientation selection in dendritic evolution , 2006, Nature materials.

[47]  Y. Cohen,et al.  Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity , 2013, Science.

[48]  Lei Jiang,et al.  Programmable Fractal Nanostructured Interfaces for Specific Recognition and Electrochemical Release of Cancer Cells , 2013, Advanced materials.

[49]  K. Moon,et al.  A simple, low-cost approach to prepare flexible highly conductive polymer composites by in situ reduction of silver carboxylate for flexible electronic applications , 2011 .

[50]  S. Magdassi,et al.  Correction: Corrigendum: Merging of metal nanoparticles driven by selective wettability of silver nanostructures , 2014, Nature Communications.

[51]  M. Basta,et al.  An introduction to percolation , 1994 .

[52]  D. Kokh,et al.  Trends in adsorption of open-shell atoms and small molecular fragments on the Ag(1 1 1) surface , 2006 .

[53]  Hongxing Xu,et al.  Highly Surface‐roughened “Flower‐like” Silver Nanoparticles for Extremely Sensitive Substrates of Surface‐enhanced Raman Scattering , 2009 .

[54]  Xiaoyuan Li,et al.  Polyelectrolyte multilayer as matrix for electrochemical deposition of gold clusters: toward super-hydrophobic surface. , 2004, Journal of the American Chemical Society.

[55]  Lei Jiang,et al.  Underwater‐Transparent Nanodendritic Coatings for Directly Monitoring Cancer Cells , 2014, Advanced healthcare materials.

[56]  K. Moon,et al.  Fast preparation of printable highly conductive polymer nanocomposites by thermal decomposition of silver carboxylate and sintering of silver nanoparticles. , 2010, ACS applied materials & interfaces.

[57]  Daqin Chen,et al.  Evolution of single crystalline dendrites from nanoparticles through oriented attachment. , 2005, The journal of physical chemistry. B.

[58]  D. Heermann,et al.  Phase diagram for three-dimensional correlated site-bond percolation , 1981 .

[59]  Rodolfo Cruz-Silva,et al.  Flash reduction and patterning of graphite oxide and its polymer composite. , 2009, Journal of the American Chemical Society.

[60]  Wenning Wang,et al.  The first-principle study on chlorine-modified silver surfaces , 2005 .

[61]  R. W. Christy,et al.  Optical Constants of the Noble Metals , 1972 .

[62]  Younan Xia,et al.  Quantitative analysis of the role played by poly(vinylpyrrolidone) in seed-mediated growth of Ag nanocrystals. , 2012, Journal of the American Chemical Society.

[63]  C. Mirkin,et al.  Controlling anisotropic nanoparticle growth through plasmon excitation , 2003, Nature.

[64]  Fu-hui Wang,et al.  Understanding corrosion inhibition mechanisms—experimental and theoretical approach , 2011 .

[65]  L. Feldman,et al.  Epitaxy of Au on Ag(111) studied by high-energy ion scattering , 1981 .

[66]  Wei Lin,et al.  Highly reliable, low cost, isotropically conductive adhesives filled with Ag-coated Cu flakes for electronic packaging applications , 2010 .

[67]  Xiaoping Song,et al.  Dendritic Silver Nanostructure Growth and Evolution in Replacement Reaction , 2007 .

[68]  M. Yuen,et al.  Water‐Based Isotropically Conductive Adhesives: Towards Green and Low‐Cost Flexible Electronics , 2011 .

[69]  L. Feldman,et al.  Oscillatory relaxation of the Ag(110) surface , 1984 .

[70]  Matthew Ming Fai Yuen,et al.  Silver Surface Iodination for Enhancing the Conductivity of Conductive Composites , 2010 .