Four-level neutral point clamped converter with reduced switch count

This paper presents a new topology of four-level neutral point clamped (NPC) converter that is primarily targeted for high-power applications. The proposed topology is favorably compared to the conventional four-level NPC converter topology due to the desired feature of reduced switch count. Furthermore, in relation to the active NPC topology that generates three-level output voltages, the proposed topology features increased number of output voltage levels. For the high-power medium-voltage applications, for which the NPC topology has been consistently chosen as the workhorse, either reduced switch count or increased number of voltage levels bears substantial practical importance in light of the reduced cost, improved reliability, superior waveform quality and minimized filtering requirement. The operating principle of the proposed topology is analyzed in detail. The effectiveness of the modulation and control of the proposed topology is verified by high-fidelity numerical simulation conducted via Sabertrade.

[1]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[2]  T. Salzmann,et al.  High-power drive system with advanced power circuitry and improved digital control , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[3]  Thomas A. Lipo,et al.  A four level inverter based drive with a passive front end , 1997 .

[4]  H. Akagi,et al.  Analysis of variation of neutral point potential in neutral-point-clamped voltage source PWM inverters , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[5]  Bin Wu,et al.  A Novel Switching Sequence Design for Five-Level NPC/H-Bridge Inverters With Improved Output Voltage Spectrum and Minimized Device Switching Frequency , 2006, IEEE Transactions on Power Electronics.

[6]  F. Wang.  Reduce Beat and Harmonics in Grid-Connected Three-Level Voltage-Source Converters With Low Switching Frequencies , 2007, IEEE Transactions on Industry Applications.

[7]  G.S. Perantzakis,et al.  A Novel Four-Level Voltage Source Inverter—Influence of Switching Strategies on the Distribution of Power Losses , 2007, IEEE Transactions on Power Electronics.

[8]  Yifan Zhao,et al.  Force Commutated Three Level Boost Type Rectifier , 1993, IEEE Transactions on Industry Applications.

[9]  P. Enjeti,et al.  Optimal power control strategies for neutral point clamped (NPC) inverter topology , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[10]  Thomas A. Lipo,et al.  A four level inverter based drive with a passive front end , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[11]  Steffen Bernet,et al.  The active NPC converter and its loss-balancing control , 2005, IEEE Transactions on Industrial Electronics.

[12]  T. Bruckner,et al.  Loss balancing in three-level voltage source inverters applying active NPC switches , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[13]  Dushan Boroyevich,et al.  A fast space vector modulation algorithm for multilevel three-phase converters , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[14]  S. Bernet,et al.  Recent developments of high power converters for industry and traction applications , 2000 .

[15]  H. Akagi,et al.  A 6.6-kV transformerless STATCOM based on a five-level diode-clamped PWM converter: system design and experimentation of a 200-V, 10-kVA laboratory model , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[16]  A. Binder,et al.  Calculation of influence of insulated bearings and insulated inner bearing seats on circulating bearing currents in machines of inverter-based drive systems , 2006, IEEE Transactions on Industry Applications.

[17]  G. Venkataramanan,et al.  Comparative evaluation of modulation algorithms for neutral point clamped converters , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..