论文信息 - Research on the Recycling of Valuable Metals from Waste Printed Circuit Boards by Eddy Current Separation

Research on the Recycling of Valuable Metals from Waste Printed Circuit Boards by Eddy Current Separation

On the basis of introducing the latest research status of processing methods of waste printed circuit boards, the physical mechanism of eddy current separation was explained, and the component configuration of eddy current separator was described. A series of single-factor and orthogonal experiments were carried out to prove the separation effect of multiple metals with eddy current separator. The result indicates that the separation efficiency of above 92.0% and concentrate grade of above 95.0% can be obtained in the recycling of aluminum and brass with the delivery rate of 20~40%, rotate speed of rotor of 5~15Hz and belt speed of 7~9Hz.

[1] Lifeng Zhang,et al. Metallurgical recovery of metals from electronic waste: a review. , 2008, Journal of hazardous materials.

[2] S. Vidyasagar,et al. Classification of metals and plastics from printed circuit boards (PCB) using air classifier , 2008 .

[3] Yaqun He,et al. Study on Dynamic Models of Active Pulsing Air Separation and Their Numerical Simulation , 2008 .

[4] Peter Carlo Rem,et al. A model for eddy current separation , 1997 .

[5] Tao Yang,et al. Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans , 2009 .

[6] A Vidyadhar,et al. A novel flowsheet for the recovery of metal values from waste printed circuit boards , 2009 .

[7] Peter Carlo Rem,et al. Modelling the throw of metals and nonmetals in eddy current separations , 2004 .

[8] D. Fray,et al. Recovery of high purity precious metals from printed circuit boards. , 2009, Journal of hazardous materials.

[9] Zhi-gang Shen,et al. A novel approach to recycling of glass fibers from nonmetal materials of waste printed circuit boards. , 2009, Journal of hazardous materials.

[10] Li Jia,et al. A new two-roll electrostatic separator for recycling of metals and nonmetals from waste printed circuit board. , 2009, Journal of hazardous materials.

[11] Yaqun He,et al. Recovery of metals from waste printed circuit boards by a mechanical method using a water medium. , 2009, Journal of hazardous materials.