L–H transition studies on DIII-D to determine H-mode access for operational scenarios in ITER

A comprehensive set of L–H transition experiments has been performed on DIII-D to determine the requirements for access to H-mode plasmas in ITER's first (non-nuclear) operational phase with H and He plasmas and the second (activated) operational phase with D plasmas. The H-mode power threshold, PTH, was evaluated for different operational configurations and auxiliary heating methods for the different main ion species. Helium plasmas have significantly higher PTH than deuterium plasmas at low densities for all heating schemes, but similar PTH as deuterium plasmas at high densities except for H-neutral beam injection-heated discharges, which are still higher. Changes in PTH are observed when helium concentration levels in deuterium plasmas exceed 40%. There is a strong dependence of PTH on the magnetic geometry in the vicinity of the divertor. The trend of decreasing PTH with decreasing X-point height is observed for all of the main ion species irrespective of the heating method, which appears to indicate that there is a common physics process behind this effect for all of the ion species. Helium and deuterium plasmas exhibit a significant increase in PTH for strong resonant magnetic perturbations. The application of a local magnetic ripple of 3% from test blanket module mock-up coils did not change PTH in deuterium plasmas.

[1]  K. Burrell,et al.  Boronization in DIII-D , 1992 .

[2]  A. Carlson,et al.  Recent results from divertor operation in ASDEX Upgrade , 1994 .

[3]  Norio Suzuki,et al.  H-Mode Power Threshold Database for ITER , 1996 .

[4]  Y. Kamada,et al.  H mode transition threshold power scaling and its relation to the edge neutrals in JT-60U , 1997 .

[5]  J. Snipes,et al.  Local variables affecting H-mode threshold on Alcator C-Mod , 1998 .

[6]  T. C. Luce,et al.  Electron cyclotron current drive efficiency in general tokamak geometry , 2003 .

[7]  F. G. Rimini,et al.  Isotope scaling of the H mode power threshold on JET , 1999 .

[8]  Tomonori Takizuka,et al.  Reduction of L-H transition threshold power under the W-shaped pumped divertor geometry in JT-60U , 2000 .

[9]  A. Murari,et al.  ELMy H-modes in JET helium-4 plasmas , 2004 .

[10]  E. Doyle,et al.  The physics of edge resonant magnetic perturbations in hot tokamak plasmasa) , 2006 .

[11]  A. Polevoi,et al.  Progress in the ITER Physics Basis - Chapter 1: Overview and summary , 2007 .

[12]  A. Polevoi,et al.  Chapter 1: Overview and summary , 2007 .

[13]  J. M. Bialek,et al.  Study of in-vessel nonaxisymmetric ELM suppression coil concepts for ITER , 2008 .

[14]  Tomonori Takizuka,et al.  Power requirement for accessing the H-mode in ITER , 2008 .

[15]  P. Gohil,et al.  Dependence of the H-mode power threshold on toroidal plasma rotation in the DIII-D tokamak , 2008 .

[16]  J. S. deGrassie,et al.  RMP ELM suppression in DIII-D plasmas with ITER similar shapes and collisionalities , 2008 .

[17]  P. Gohil,et al.  The H-mode power threshold in hydrogen plasmas in DIII-D , 2009 .

[18]  R. Neu,et al.  H-mode threshold and confinement in helium and deuterium in ASDEX Upgrade , 2009 .

[19]  T. Osborne,et al.  The torque dependence of the H-mode power threshold in hydrogen, deuterium and helium plasmas in DIII-D , 2010 .

[20]  Michael J. Schaffer,et al.  ITER test blanket module error field simulation experiments at DIII-D , 2011 .