An improved equation for the overall heat transfer coefficient in packed beds

[1]  K. Westerterp,et al.  The lumping of heat transfer parameters in cooled packed beds: effect of the bed entry , 1993 .

[2]  G. Eigenberger,et al.  A reevaluation of fluid flow, heat transfer and chemical reaction in catalyst filled tubes , 1992 .

[3]  K. R. Westerterp,et al.  Influence of tube and particle diameter on heat transport in packed beds , 1992 .

[4]  An accurate one‐dimensional model for nonadiabatic annular reactors , 1991 .

[5]  D. Vortmeyer,et al.  Discrimination of three approaches to evaluate heat fluxes for wall-cooled fixed bed chemical reactors , 1991 .

[6]  The choice between cooled tubular reactor models: analysis of the hot spot , 1990 .

[7]  DEVELOPMENT OF OVERALL HEAT TRANSFER COEFFICIENTS FROM THE HETEROGENEOUS TWO DIMENSIONAL (2-D) MODEL FOR CATALYTIC FIXED BED REACTORS, A COMPARISON BETWEEN ID AND 2-D MODELS , 1989 .

[8]  Mordechay Herskowitz,et al.  Runaway in highly sensitive tubular reactors , 1988 .

[9]  P. S. Hagan,et al.  A simple approach to highly sensitive tubular reactors , 1988 .

[10]  Anthony G. Dixon,et al.  WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS , 1988 .

[11]  P. Hagan,et al.  Accurate one‐dimensional fixed‐bed reactor model based on asymptotic analysis , 1988 .

[12]  H. Kheshgi,et al.  Transients in tubular reactors: comparison of one- and two-dimensional models , 1988 .

[13]  Heat Transfer in Packed Bed Reactors , 1986 .

[14]  Theoretical prediction of heterogeneous one‐dimensional heat transfer coefficients for fixed‐bed reactors , 1985 .

[15]  Thermal resistance models of packed‐bed effective heat transfer parameters , 1985 .

[16]  O. M. Martinez,et al.  Modeling of fixed bed catalytic reactors , 1985 .

[17]  N. Lemcoff,et al.  A heterogeneous one-dimensional model for non-adiabatic fixed bed catalytic reactors , 1984 .

[18]  William R. Paterson,et al.  Fixed bed catalytic reactor modelling: The heat transfer problem , 1983 .

[19]  E. Newson,et al.  Heat Transfer in Packed Reactor Tubes Suitable for Selective Oxidation , 1982 .

[20]  R. Fahien,et al.  Tubular reactor design—II A modified one dimensional model , 1980 .

[21]  R. Fahien,et al.  Tubular reactor design—I Two dimensional model , 1980 .

[22]  Anthony G. Dixon,et al.  Theoretical prediction of effective heat transfer parameters in packed beds , 1979 .

[23]  K. M. Sundaram,et al.  A comparison of simulation models for empty tubular reactors , 1979 .

[24]  A. Dixon.  Heat transfer in packed beds of low tube/particle diameter ratio , 1978 .

[25]  J. Villadsen,et al.  Solution of differential equation models by polynomial approximation , 1978 .

[26]  Comparison between twodimensional fixed bed reactor calculations and measurements , 1975 .

[27]  D. J. Gunn,et al.  Thermal dispersion and wall heat transfer in packed beds , 1975 .

[28]  Bruce A. Finlayson,et al.  Packed bed reactor analysis by orthogonal collocation , 1971 .

[29]  D. Mears,et al.  Diagnostic criteria for heat transport limitations in fixed bed reactors , 1971 .

[30]  C. Mcgreavy,et al.  Model reduction of fixed bed catalytic reactors , 1970 .

[31]  Gilbert F. Froment,et al.  FIXED BED CATALYTIC REACTORS—CURRENT DESIGN STATUS , 1967 .

[32]  J. E. Crider,et al.  Effective wall heat transfer coefficients and thermal resistances in mathematical models of packed beds , 1965 .

[33]  G. Froment,et al.  Design of fixed-bed catalytic reactors based on effective transport models , 1962 .

[34]  John Beek,et al.  Design of Packed Catalytic Reactors , 1962 .