Experimental results on neural network-based control strategies for flexible-link manipulators

The problem of controlling a nonminimum phase nonlinear system with application to tip position control of a flexible-link manipulator is considered. An output re-definition strategy is developed which is applicable to a class of open-loop stable nonlinear systems whose input-output maps contain nonlinear terms from output and linear terms from input. No a priori knowledge about the nonlinearities of the system is required. The output re-definition scheme is based on first identifying the nonlinearities of the system using neural networks and then modifying the system zero dynamics. A stable/anti-stable factorization is performed on the zero dynamics of the system. The new output is re-defined using the neural identifier and the stable part of the zero dynamics. A controller is then designed based on the new output whose zero dynamics are stable and can be inverted. For the flexible-link manipulator case, the controller is composed of a stabilizing joint PD controller and an output re-definition tracking controller. Experimental and simulation results are presented to show the effectiveness of the proposed control scheme as compared to both linear and nonlinear conventional controllers.

[1]  P. Misra,et al.  Transmission Zero Assignment in Linear Multivariable Systems; Part II: The General Case , 1992, 1992 American Control Conference.

[2]  Sahjendra N. Singh,et al.  Inverse Trajectory Control and Zero Dynamics Sensitivity of an Elastic Manipulator , 1991, 1991 American Control Conference.

[3]  W. Book.  Recursive Lagrangian Dynamics of Flexible Manipulator Arms , 1984 .

[4]  Richard D. Braatz,et al.  On the "Identification and control of dynamical systems using neural networks" , 1997, IEEE Trans. Neural Networks.

[5]  Heidar Ali Talebi,et al.  Experimental results on tracking control of a flexible-link manipulator: a new output re-definition approach , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[6]  Mathukumalli Vidyasagar,et al.  Transfer functions for a single flexible link , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[7]  B. Siciliano,et al.  An asymptotically stable joint PD controller for robot arms with flexible links under gravity , 1992, [1992] Proceedings of the 31st IEEE Conference on Decision and Control.

[8]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[9]  M. Morari,et al.  On Nonlinear Systems with Poorly Behaved Zero Dynamics , 1992, 1992 American Control Conference.

[10]  J. Karl Hedrick,et al.  Tracking nonlinear non-minimum phase systems using sliding control , 1993 .

[11]  Marios M. Polycarpou,et al.  Modelling, Identification and Stable Adaptive Control of Continuous-Time Nonlinear Dynamical Systems Using Neural Networks , 1992, 1992 American Control Conference.

[12]  Heidar Ali Talebi,et al.  Neural network based control schemes for flexible-link manipulators: simulations and experiments , 1998, Neural Networks.

[13]  Bruno Siciliano,et al.  Trajectory control of a non-linear one-link flexible arm , 1989 .

[14]  S. Shankar Sastry,et al.  Nonlinear control design for slightly non-minimum phase systems: Application to V/STOL aircraft , 1992, Autom..

[15]  Thomas E. Alberts,et al.  Globally stabilizing controllers for flexible multibody systems , 1992, [1992] Proceedings of the 31st IEEE Conference on Decision and Control.