Experimental study on wave transmission coefficient, mooring lines and module connector forces with different designs of floating breakwaters

Abstract This paper presents the results and conclusions obtained from the physical model tests carried out with four different designs of floating breakwaters. Changes from a basic design have been introduced in order to evaluate the improvement in the efficiency as a coastal protection structure. Incident and transmitted waves have been measured, as well as the efforts in the mooring lines and module connectors. It has been found that the width of the pontoons is one of the key design parameters, while small modifications in the floating breakwater's cross section shape are less determinant in its hydrodynamic behaviour and in mechanical loads in the discussed ranges. 2D and 3D tests were conducted, observing the great influence that the wave obliquity has in the module connector forces.

[1]  X. Gironella,et al.  Floating breakwaters under regular and irregular wave forcing: reflection and transmission characteristics , 2005 .

[2]  M Fukuya,et al.  DEVELOPMENT OF FLOATING BREAKWATERS FOR FISHING PORTS , 1994 .

[3]  Bruce L. McCartney.  Floating Breakwater Design , 1985 .

[4]  G P Blumberg,et al.  FLOATING BREAKWATER PHYSICAL MODEL TESTING FOR MARINA APPLICATIONS , 1988 .

[5]  Josep R. Medina,et al.  ESTIMATING INCIDENT AND REFLECTED WAVES USING A FULLY NONLINEAR WAVE MODEL , 2005 .

[6]  Lyndell Z. Hales.  Floating breakwaters : state-of-the-art literature review / by Lyndell Z. Hales. , 1981 .

[7]  Vallam Sundar,et al.  Mooring forces and motion responses of pontoon-type floating breakwaters , 1998 .

[8]  Pascal Lafon,et al.  Multidisciplinary Optimization of a Moored Rectangular Floating Breakwater , 2008 .

[9]  J Gaithwaite.  PRACTICAL ASPECTS OF FLOATING BREAKWATER DESIGN , 1988 .

[10]  K. Murali,et al.  Performance of Cage Floating Breakwater , 1997 .

[11]  E. L. Mulvihill,et al.  BIOLOGICAL IMPACTS OF MINOR SHORELINE STRUCTURES ON THE COASTAL ENVIRONMENT: STATE OF THE ART REVIEW. VOLUME I , 1980 .

[12]  E. Eranti,et al.  STRUCTURAL CONTINUITY - KEY TO IMPROVED PERFORMANCE OF PONTOON PIERS AND BREAKWATERS , 1996 .

[13]  Bin Teng,et al.  Experiments on wave transmission coefficients of floating breakwaters , 2008 .

[14]  E. Mansard,et al.  The Measurement of Incident and Reflected Spectra Using a Least squares Method , 1980 .

[15]  Steven A Hughes,et al.  PHYSICAL MODELS AND LABORATORY TECHNIQUES IN COASTAL ENGINEERING , 1993 .

[16]  J. Mani.  Design of Y‐Frame Floating Breakwater , 1991 .

[17]  Akinori Yoshida,et al.  Dynamics of elastically moored floating objects , 1980 .

[18]  Mohamed. R. Gesraha.  Analysis of Π shaped floating breakwater in oblique waves: I. Impervious rigid wave boards , 2006 .

[19]  Barbara Zanuttigh,et al.  Wave basin experiments on floating breakwaters with different layouts , 2008 .

[20]  Piero Ruol,et al.  WAVE FLUME INVESTIGATION ON DIFFERENT MOORING SYSTEMS FOR FLOATING BREAKWATERS , 2009 .