Deciphering phase stress partition and its correlation to mechanical anisotropy of laser powder bed fusion AlSi10Mg

[1]  M. Zhang,et al.  Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg , 2022, Materials Science and Engineering: A.

[2]  Deliang Zhang,et al.  Influence of Mg on tensile deformation behavior of high Mg-content Al-Mg alloys , 2022, International Journal of Plasticity.

[3]  Minsheng Huang,et al.  Size-dependent microvoid growth in heterogeneous polycrystals , 2022, International Journal of Plasticity.

[4]  Minsheng Huang,et al.  Review on the Correlation Between Microstructure and Mechanical Performance for Laser Powder Bed Fusion AlSi10Mg , 2022, Additive Manufacturing.

[5]  M. Yadava,et al.  Combinatorial Synchrotron Diffraction-Constitutive Modelling-Crystal Plasticity Simulation Framework for Direct Metal Laser Sintered AlSi10Mg Alloy , 2022, SSRN Electronic Journal.

[6]  J. Benzing,et al.  A Microstructure-based porous crystal plasticity FE Model for additively manufactured Ti-6Al-4V alloys , 2022, International Journal of Plasticity.

[7]  Minsheng Huang,et al.  Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg , 2022, Materials Science and Engineering: A.

[8]  H. Andrä,et al.  Crystal plasticity simulation of the macroscale and microscale stress–strain relations of additively manufactured AlSi10Mg alloy , 2021, Computational Materials Science.

[9]  A. Bower,et al.  Microstructural origin of the anisotropic flow stress of laser powder bed fused AlSi10Mg , 2021, Acta Materialia.

[10]  J. Zhu,et al.  Effect of building orientation and heat treatment on the anisotropic tensile properties of AlSi10Mg fabricated by selective laser melting , 2021, Journal of Alloys and Compounds.

[11]  A. Jardini,et al.  Effects of build orientation and heat treatments on the tensile and fracture toughness properties of additively manufactured AlSi10Mg , 2021, International Journal of Mechanical Sciences.

[12]  G. Gibbons,et al.  A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: Microstructure and properties , 2021 .

[13]  D. Lados,et al.  Microstructure evolution, fatigue crack growth, and ultrasonic fatigue in As-fabricated laser powder bed and conventionally cast Al–10Si-0.4Mg: A mechanistic understanding and integrated flaw-sensitive fatigue design methods , 2021 .

[14]  R. Tongsri,et al.  MPB characteristics and Si morphologies on mechanical properties and fracture behavior of SLM AlSi10Mg , 2021, Materials Science and Engineering: A.

[15]  S. Sui,et al.  Evolution of Heterogeneous Microstructure and its Effects on Tensile Properties of Selective Laser Melted AlSi10Mg Alloy , 2021, Journal of Materials Engineering and Performance.

[16]  J. Kruzic,et al.  Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion , 2021 .

[17]  C. Emmelmann,et al.  Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy , 2021 .

[18]  Z. Deng,et al.  Microstructure and constitutive model for flow behavior of AlSi10Mg by Selective Laser Melting , 2021 .

[19]  L. Thijs,et al.  Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg , 2021, Scientific Reports.

[20]  H. Andrä,et al.  Multiscale constitutive modeling of additively manufactured Al–Si–Mg alloys based on measured phase stresses and dislocation density , 2021 .

[21]  Zhenhua Li,et al.  Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions , 2021 .

[22]  Paulraj Sathiya,et al.  Methods and materials for additive manufacturing: A critical review on advancements and challenges , 2021, Thin-Walled Structures.

[23]  S. Motaman,et al.  The microstructural effects on the mechanical response of polycrystals: A comparative experimental-numerical study on conventionally and additively manufactured metallic materials , 2021 .

[24]  George S. Kamaris,et al.  Aluminium alloys as structural material: A review of research , 2021, Engineering Structures.

[25]  S. Barcikowski,et al.  Research trends in laser powder bed fusion of Al alloys within the last decade , 2020 .

[26]  E. Maire,et al.  Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg , 2020 .

[27]  A. Simar,et al.  Nanoscale Periodic Gradients Generated by Laser Powder Bed Fusion of an AlSi10Mg Alloy , 2020 .

[28]  C. Badini,et al.  A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion , 2020 .

[29]  O. Faruque,et al.  Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg , 2020 .

[30]  Aiden A. Martin,et al.  Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing , 2020, Science.

[31]  Yusheng Shi,et al.  Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting , 2020 .

[32]  Zan Li,et al.  Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys , 2020 .

[33]  Nicholas C. Ferreri,et al.  Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures , 2020, International Journal of Plasticity.

[34]  Y. Liu,et al.  Integration of phase-field model and crystal plasticity for the prediction of process-structure-property relation of additively manufactured metallic materials , 2020 .

[35]  J. Plocher,et al.  Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures , 2019 .

[36]  C. Fressengeas,et al.  Crystal plasticity modeling of the effects of crystal orientation and grain-to-grain interactions on DSA-induced strain localization in Al–Li alloys , 2019, Materialia.

[37]  R. Hague,et al.  3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting , 2019, Progress in Materials Science.

[38]  Ernst Rank,et al.  Additive manufacturing in construction: A review on processes, applications, and digital planning methods , 2019, Additive Manufacturing.

[39]  H. Idrissi,et al.  Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions , 2019, Materials Science and Engineering: A.

[40]  Jacqueline Lecomte-Beckers,et al.  Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting , 2019, Acta Materialia.

[41]  V. Romanova,et al.  A method of step-by-step packing and its application in generating 3D microstructures of polycrystalline and composite materials , 2019, Engineering with Computers.

[42]  Wei Liu,et al.  Microstructure of selective laser melted AlSi10Mg alloy , 2019, Materials & Design.

[43]  Annalisa Pola,et al.  Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy , 2019 .

[44]  R. Misra,et al.  Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy , 2019, Materials Science and Engineering: A.

[45]  M. Mohammadi,et al.  Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders , 2018, Additive Manufacturing.

[46]  M. Elbestawi,et al.  Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder , 2018 .

[47]  Stefano Beretta,et al.  Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength , 2017 .

[48]  N. Takata,et al.  Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments , 2017 .

[49]  W. Woo,et al.  Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM , 2017 .

[50]  J. Eckert,et al.  Formation of metastable cellular microstructures in selective laser melted alloys , 2017 .

[51]  L. Hitzler,et al.  Direction and location dependency of selective laser melted AlSi10Mg specimens , 2017 .

[52]  K. An,et al.  Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction , 2016 .

[53]  Q. Pei,et al.  Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling , 2016 .

[54]  I. Ashcroft,et al.  The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment , 2016 .

[55]  R. Poprawe,et al.  Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties , 2015 .

[56]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[57]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[58]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[59]  K. L. Nielsen,et al.  Micro-mechanical modelling of ductile failure in 6005A aluminium using a physics based strain hardening law including stage IV , 2010 .

[60]  Chung-Souk Han,et al.  Mechanism-based strain gradient crystal plasticity—I. Theory , 2005 .

[61]  H. Fjaer,et al.  Modelling of the microstructure and strength evolution in Al–Mg–Si alloys during multistage thermal processing , 2004 .

[62]  James R. Rice,et al.  Strain localization in ductile single crystals , 1977 .

[63]  J. Rice,et al.  Constitutive analysis of elastic-plastic crystals at arbitrary strain , 1972 .

[64]  J. Rice Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity , 1971 .

[65]  G. Taylor The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical , 1934 .

[66]  P. Bai,et al.  Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting , 2021 .

[67]  Luca Iuliano,et al.  A literature review of powder-based electron beam melting focusing on numerical simulations , 2018 .

[68]  J. Kruth,et al.  Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting , 2012 .