论文信息 - Modeling of a novel Trombe wall with PV cells

Modeling of a novel Trombe wall with PV cells

Abstract A novel Trombe wall with PV cells is presented in this paper. A two-dimensional model of PV glass panel and a model of the PV-Trombe wall system are established. The temperature distribution and electrical performance of the PV-Trombe wall system are also obtained. Results show that according to the measured weather data and the special simulation condition, the temperature difference between the elements with and without PV cell on the glass panel reaches a maximum value of 10.6 ∘ C; the temperature difference between the room with and without PV-Trombe wall reaches a maximum value of 12.3 ∘ C during 3 days; after 7 days’ operation, the all-day temperature of the room with PV-Trombe wall retains at about 13.4 ∘ C and an increase of 5.00% for the electrical efficiency can be achieved.

[1] William A. Beckman,et al. Solar Engineering of Thermal Processes, 2nd ed. , 1994 .

[2] Gs Yakubu,et al. The reality of living in passive solar homes: A user-experience study , 1996 .

[3] H.X. Yang,et al. Validated simulation for thermal regulation of photovoltaic wall structures , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.

[4] Ha Herbert Zondag,et al. The thermal and electrical yield of a PV-thermal collector , 2002 .

[5] Guohui Gan,et al. A parametric study of Trombe walls for passive cooling of buildings , 1998 .

[6] W. Beckman,et al. Solar Engineering of Thermal Processes , 1985 .

[7] A. Thomas,et al. Some aspects of trombe wall heat transfer models , 1991 .

[8] Sushil K. Chaturvedi,et al. An approximate method for calculating laminar natural convective motion in a trombe-wall channel , 1994 .

[9] Hongxing Yang,et al. Thermal regulation of photovoltaic cladding , 1997 .