EXPERIMENTAL VERIFICATION OF STRUCTURAL-ACOUSTIC MODELLING AND DESIGN OPTIMIZATION

A number of papers have been published on the simulation of structural-acoustic design optimization. However, extensive work is required to verify these results in practical applications. Herein, a steel box of 1.0×1.1×1.5 meters with an external beam structure welded on three surface plates was investigated. This investigation included experimental modal analysis and experimental measurements of certain noise transfer functions (sound pressure at points inside the box due to force excitation at beam structure). Using these experimental data, the finite element model of the structure was tuned to provide similar results. With a first structural mode at less than 20 Hertz the reliable frequency range was identified up to about 60 Hertz. Obviously, the finite element model could not be further improved only by mesh refinement. The tuning process will be explained in detail since there was a number of changes that helped to improve the structure. Other changes did not improve the structure. Although this model of the box could be expected as a rather simple structure it can be considered to be a complex structure for simulation purposes. A defined modification of the physical model verified the simulation model. In a final step, the optimal location of stiffening beam structures was predicted by simulation. Their effect on the noise transfer function was experimentally verified. This paper critically discusses modeling techniques that are applied for structural-acoustic simulation of sedan bodies.

[1]  Carlos A. Brebbia.  Computational Acoustics and Its Environmental Applications , 1995 .

[2]  Steffen Marburg,et al.  Efficient optimization of a noise transfer function by modification of a shell structure geometry – Part I: Theory , 2002 .

[3]  Steffen Marburg,et al.  Efficient optimization of a noise transfer function by modification of a shell structure geometry – Part II: Application to a vehicle dashboard , 2002 .

[4]  Hans-Jürgen Hardtke,et al.  A study on the acoustic boundary admittance. Determination, results and consequences , 1999 .

[5]  Scott P. Crane,et al.  Comparison of Design Optimization Formulations for Minimization of Noise Transmission in a Cylinder , 1997 .

[6]  Kenneth A. Cunefare,et al.  Design Minimization of Noise in Stiffened Cylinders Due to Tonal External Excitation , 1999 .

[7]  Gary H. Koopmann,et al.  A Design Method for Minimizing the Sound Power Radiated from Plates by Adding Optimally Sized, Discrete Masses , 1995 .

[8]  Kenneth A. Cunefare,et al.  Stiffener Shape Design to Minimize Interior Noise , 2000 .

[9]  A. D. Belegundu,et al.  A general optimization strategy for sound power minimization , 1994 .

[10]  F. Ihlenburg.  Finite Element Analysis of Acoustic Scattering , 1998 .

[11]  Eric Constans,et al.  Design Approach for Minimizing Sound Power from Vibrating Shell Structures , 1998 .

[12]  Xi Zhao,et al.  An approach for evaluating power transfer coefficients for spot-welded joints in an energy finite element formulation , 1999 .

[13]  M. Tinnsten.  Optimization of acoustic response — a numerical and experimental comparison , 2000 .

[14]  L. Hermans,et al.  Modal parameter estimation from inconsistent data sets , 2000 .

[15]  Chinmoy Pal,et al.  Dynamic analysis of a coupled structural-acoustic problem: simultaneous multi-modal reduction of vehicle interior noise level by combined optimization , 1993 .

[16]  Søren Tørholm Christensen,et al.  Shape Optimization of a Loudspeaker Diaphragm with Respect to Sound Directivity Properties , 1998 .

[17]  John S. Lamancusa,et al.  Design optimization methods for rectangular panels with minimal sound radiation , 1994 .

[18]  S. Marburg.  SIX BOUNDARY ELEMENTS PER WAVELENGTH: IS THAT ENOUGH? , 2002 .

[19]  Shinji Suzuki,et al.  The Applications of ACOUST/BOOM — A Noise Level Predicting and Reducing Computer Code , 1988 .

[20]  Stephen A. Hambric.  Sensitivity Calculations for Broad-Band Acoustic Radiated Noise Design Optimization Problems , 1996 .

[21]  J. S. Lamancusa,et al.  Numerical optimization techniques for structural-acoustic design of rectangular panels , 1993 .

[22]  Eric Constans,et al.  THE USE OF MODAL TAILORING TO MINIMIZE THE RADIATED SOUND POWER OF VIBRATING SHELLS: THEORY AND EXPERIMENT , 1998 .

[23]  M. Heckl,et al.  Korperschall: Physikalische Grundlagen Und Technische Anwendungen , 1996 .

[24]  J. S. Lamancusa.  Geometric optimization of internal combustion engine induction systems for minimum noise transmission , 1988 .

[25]  Mikael Jonsson,et al.  Optimization of acoustic response , 1999 .

[26]  Chinmoy Pal,et al.  Optimization of Noise Level Reduction by Truncated Modal Coupled Structural-Acoustic Sensitivity Analysis , 1994 .

[27]  Hans-Jürgen Hardtke,et al.  Application of the concept of acoustic influence coefficients for the optimization of a vehicle roof , 1997 .

[28]  A. Belegundu,et al.  Material tailoring of structures to achieve a minimum radiation condition , 1992 .

[29]  Frank Hibinger.  Numerische Strukturoptimierung in der Maschinenakustik , 1998 .

[30]  R. A. Adey,et al.  Predicting acoustic contributions and sensitivity. Application to vehicle structures , 1970 .

[31]  Stephen A. Hambric.  Approximation Techniques for Broad-Band Acoustic Radiated Noise Design Optimization Problems , 1993 .