Disposable polyester-toner electrophoresis microchips for DNA analysis.

Microchip electrophoresis has become a powerful tool for DNA separation, offering all of the advantages typically associated with miniaturized techniques: high speed, high resolution, ease of automation, and great versatility for both routine and research applications. Various substrate materials have been used to produce microchips for DNA separations, including conventional (glass, silicon, and quartz) and alternative (polymers) platforms. In this study, we perform DNA separation in a simple and low-cost polyester-toner (PeT)-based electrophoresis microchip. PeT devices were fabricated by a direct-printing process using a 600 dpi-resolution laser printer. DNA separations were performed on PeT chip with channels filled with polymer solutions (0.5% m/v hydroxyethylcellulose or hydroxypropylcellulose) at electric fields ranging from 100 to 300 V cm(-1). Separation of DNA fragments between 100 and 1000 bp, with good correlation of the size of DNA fragments and mobility, was achieved in this system. Although the mobility increased with increasing electric field, separations showed the same profile regardless of the electric field. The system provided good separation efficiency (215,000 plates per m for the 500 bp fragment) and the separation was completed in 4 min for 1000 bp fragment ladder. The cost of a given chip is approximately $0.15 and it takes less than 10 minutes to prepare a single device.

[1]  Christoph Heller,et al.  Principles of DNA separation with capillary electrophoresis , 2001, Electrophoresis.

[2]  Emanuel Carrilho,et al.  Electrokinetic control of fluid in plastified laser-printed poly(ethylene terephthalate)-toner microchips , 2005, Analytical and bioanalytical chemistry.

[3]  X. Xia,et al.  Effect of surface microstructures on the separation efficiency of neurotransmitters on a direct-printed capillary electrophoresis microchip. , 2009, Talanta.

[4]  Emanuel Carrilho,et al.  Electrophoresis microchip fabricated by a direct‐printing process with end‐channel amperometric detection , 2004, Electrophoresis.

[5]  José Alberto Fracassi da Silva,et al.  A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films. , 2003, Analytical chemistry.

[6]  A. Woolley,et al.  Ultra-high-speed DNA fragment separations using microfabricated capillary array electrophoresis chips. , 1994, Proceedings of the National Academy of Sciences of the United States of America.

[7]  D. Ehrlich,et al.  Two-color multiplexed analysis of eight short tandem repeat loci with an electrophoretic microdevice. , 1999, Analytical biochemistry.

[8]  James P Landers,et al.  Dynamic solid phase DNA extraction and PCR amplification in polyester-toner based microchip. , 2011, Analytical chemistry.

[9]  G. Slater,et al.  The theory of DNA separation by capillary electrophoresis. , 2003, Current opinion in biotechnology.

[10]  E. Carrilho,et al.  Simplex maximization of the correlation coefficient for DNA sizing analysis by capillary electrophoresis , 2005, Electrophoresis.

[11]  Yick Chuen Chan,et al.  Biased reptation model with electroosmosis for DNA electrophoresis in microchannels with a sub-micron pillar array , 2011 .

[12]  José Alberto Fracassi da Silva,et al.  Toner and paper‐based fabrication techniques for microfluidic applications , 2010, Electrophoresis.

[13]  Thomas N. Chiesl,et al.  Ultrafast DNA sequencing on a microchip by a hybrid separation mechanism that gives 600 bases in 6.5 minutes , 2008, Proceedings of the National Academy of Sciences.

[14]  J P Landers,et al.  Robust polymeric microchannel coatings for microchip-based analysis of neat PCR products. , 2001, Analytical chemistry.

[15]  J. Landers,et al.  Rapid diagnosis of herpes simplex encephalitis using microchip electrophoresis of PCR products. , 1999, Clinical chemistry.

[16]  D. Soane,et al.  Capillary electrophoresis of DNA in entangled polymer solutions. , 1991, Journal of chromatography.

[17]  James P Landers,et al.  Hydroxyethylcellulose as an effective polymer network for DNA analysis in uncoated glass microchips: optimization and application to mutation detection via heteroduplex analysis. , 2002, Analytical biochemistry.

[18]  Victor M Ugaz,et al.  Microfabricated electrophoresis systems for DNA sequencing and genotyping applications: current technology and future directions , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[19]  Lin Chen,et al.  (Review Article) High-Throughput DNA Analysis by Microchip Electrophoresis , 2004 .

[20]  Hui Yu,et al.  Improved separation efficiency of neurotransmitters on a native printed capillary electrophoresis microchip simply by manipulating electroosmotic flow. , 2008, Talanta.

[21]  José Alberto Fracassi da Silva,et al.  Fabrication and integration of planar electrodes for contactless conductivity detection on polyester‐toner electrophoresis microchips , 2008, Electrophoresis.

[22]  Michael G. Roper,et al.  A fully integrated microfluidic genetic analysis system with sample-in–answer-out capability , 2006, Proceedings of the National Academy of Sciences.

[23]  James P Landers,et al.  Hydroxypropyl cellulose as an adsorptive coating sieving matrix for DNA separations: artificial neural network optimization for microchip analysis. , 2003, Analytical chemistry.

[24]  Emanuel Carrilho,et al.  Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester‐toner , 2008, Electrophoresis.

[25]  Feng-Yun He,et al.  Plastified poly(ethylene terephthalate) (PET)-toner microfluidic chip by direct-printing integrated with electrochemical detection for pharmaceutical analysis. , 2006, Talanta.