On the formation of Taylor bubbles in small tubes

The formation of Taylor bubbles and resulting bubble lengths were studied in a 1mm ID vertical tube for air–water and air–octane systems. In the co-flow tube/nozzle arrangement two nozzle sizes were used as gas inlets. Superficial velocities varied between 0.001–0.025m/s for the liquid and 0.002–0.04m/s for the gas. Three different mechanisms of initial bubble formation were observed. Of the three mechanisms, mechanism 3 is periodic (with period consisting of a bubble and a liquid slug), reproducible and can be simply modelled. After initial bubble formation further modifications may occur in the formed bubble size by coalescence or pairing. Bubble pairing is encouraged by smaller nozzles and liquid flow rates, while coalescence is observed only for cases where non-Taylor bubbles form initially. Two simple models have been proposed, the first predicts the size of the Taylor bubbles formed by mechanism 3 while the second attempts to predict the condition for bubble pairing to occur. Reasonable agreement with experimental results validates the predictions of the first model for a strong dependence of the volume of Taylor bubbles formed on the gas and liquid flow rates, a moderate dependence on nozzle diameter and a weak dependence (if at all) on the surface tension of the liquid used. Mismatch with the experimental results is caused (at least in part) by the experimental setup where there was no perfect axial alignment of the gas inlet. The experiments also suffered from problems at the outlet at low flow rates where smooth bubble disengagement could not be ensured for long Taylor bubbles. The second model for pairing predicts its occurrence for concentric tube/nozzle arrangements as a function of flow rates and channel diameters. The model over-predicted the range of liquid flow rates at which pairing was observed experimentally, but it captured the form of the boundary between different bubble volume modification mechanisms when represented on superficial velocity graphs.

[1]  H. Rath,et al.  Influence of buoyancy on bubble formation at submerged orifices , 1995 .

[2]  Chris R. Kleijn,et al.  Inertial and Interfacial Effects on Pressure Drop of Taylor Flow in Capillaries , 2005 .

[3]  David Quéré,et al.  Quick deposition of a fluid on the wall of a tube , 2000 .

[4]  F. Bretherton.  The motion of long bubbles in tubes , 1961, Journal of Fluid Mechanics.

[5]  Martin A. Abraham,et al.  Flow patterns in liquid slugs during bubble-train flow inside capillaries , 1997 .

[6]  Ziping Feng,et al.  Two-phase flow in microchannels , 2002 .

[7]  Fernando A. Saita,et al.  The rear meniscus of a long bubble steadily displacing a Newtonian liquid in a capillary tube , 1999 .

[8]  Jing-Den Chen,et al.  Measuring the film thickness surrounding a bubble inside a capillary , 1986 .

[9]  Deformation of advancing gas-liquid interfaces in capillary tubes. , 2003, Journal of colloid and interface science.

[10]  A. Gavriilidis,et al.  A model for predicting axial mixing during gas–liquid Taylor flow in microchannels at low Bodenstein numbers , 2004 .

[11]  J. Gracia-Fadrique,et al.  Elliptic solution to the Young-Laplace differential equation. , 2005, Journal of colloid and interface science.

[12]  Martin A. Abraham,et al.  Dispersion during bubble-train flow in capillaries , 1999 .

[13]  Albin Pintar,et al.  The role of gas bubbles and liquid slug lengths on mass transport in the Taylor flow through capillaries , 1997 .

[14]  Said Irandoust,et al.  Finite‐element analysis of Taylor flow , 1996 .

[15]  Fernando A. Saita,et al.  The axisymmetric and plane cases of a gas phase steadily displacing a Newtonian liquid—A simultaneous solution of the governing equations , 1997 .

[16]  S. Ostrach,et al.  Modeling bubble and drop formation in flowing liquids in microgravity , 1994 .

[17]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[18]  Y. Kamotani,et al.  Bubble formation in a coflow configuration in normal and reduced gravity , 1998 .

[19]  Bengt Andersson,et al.  Mass transfer and liquid-phase reactions in a segmented two-phase flow monolithic catalyst reactor , 1988 .

[20]  Martin A. Abraham,et al.  Bubble-train flow in capillaries of circular and square cross section , 1995 .

[21]  G. Taylor.  Deposition of a viscous fluid on the wall of a tube , 1961, Journal of Fluid Mechanics.

[22]  R. Kumar,et al.  The Formation of Bubbles and Drops , 1970 .

[23]  Said I. Abdel-Khalik,et al.  Gas–liquid two-phase flow in microchannels Part I: two-phase flow patterns , 1999 .