Identification of the location and size of cracks in beams by a piezoceramic actuator–sensor

This paper presents an application of the modal identification technique employing piezoceramic (PZT) material to identify the location and size of cracks in beams. A PZT patch can be used both as an actuator and a sensor by utilizing its electro-mechanical coupling property. Measuring the impedance at a location where a PZT is bonded to a beam, modal frequencies of the beam are identified from the measured impedance. In this technique, the beam can be excited at high frequencies in order to obtain information of high-frequency modes that are sensitive to local damage. The location and size of the cracks can be identified from the measured impedance as well as using a cracked beam model formulated from a spectral element method (SEM). The SEM is used in the structural modelling because of its high accuracy in modelling of beam in high-frequency range. An experiment was performed on a set of cracked aluminium beams and it is demonstrated that the location and depth of the cracks could be accurately identified using the proposed technique. Copyright © 2007 John Wiley & Sons, Ltd.

[1]  James F. Doyle,et al.  Determining the size and location of transverse cracks in beams , 1995 .

[2]  Craig A. Rogers,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems — Determination of the Actuator Power Consumption and System Energy Transfer , 1994 .

[3]  Suresh Bhalla,et al.  Incipient damage localization with smart piezoelectric material using high-frequency actuation , 2002, SPIE Micro + Nano Materials, Devices, and Applications.

[4]  John H. Holland,et al.  Outline for a Logical Theory of Adaptive Systems , 1962, JACM.

[5]  Victor Giurgiutiu,et al.  Electro-Mechanical Impedance Method for Crack Detection in Thin Plates , 2001 .

[6]  Daniel J. Inman,et al.  Feasibility of using impedance‐based damage assessment for pipeline structures , 2001 .

[7]  Suresh Bhalla,et al.  Performance of smart piezoceramic patches in health monitoring of a RC bridge , 2000 .

[8]  Yozo Fujino,et al.  Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor , 2004 .

[9]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[10]  Raymond D. Mindlin,et al.  TIMOSHENKO'S SHEAR COEFFICIENT FOR FLEXURAL VIBRATIONS OF BEAMS , 1953 .

[11]  Chen Liang,et al.  Application of active structural health monitoring technique to aircraft fuselage structures , 1996, Smart Structures.

[12]  C. Liang,et al.  Truss Structure Integrity Identification Using PZT Sensor-Actuator , 1995 .

[13]  Simon Parsons,et al.  Soft computing: fuzzy logic, neural networks and distributed artificial intelligence by F. Aminzadeh and M. Jamshidi (Eds.), PTR Prentice Hall, Englewood Cliffs, NJ, pp 301, ISBN 0-13-146234-2 , 1996, Knowl. Eng. Rev..

[14]  U. Lee.  Spectral Element Method in Structural Dynamics , 2009 .

[15]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[16]  Daniel J. Inman,et al.  Self-healing bolted joint analysis , 2002 .

[17]  Victor Giurgiutiu,et al.  Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification , 2002 .