Electronically Controllable Current-Mode Universal Biquad Filter Using Single DO-CCCDTA

This article presents a three-input two-output current-mode universal biquadratic filter performing completely standard functions: low-pass, high-pass, band-pass, band-reject and all-pass functions, based-on a dual output current controlled current differencing transconductance amplifier (DO-CCCDTA). The features of the circuit are that the bandwidth and pole frequency can be tuned electronically via the input bias currents and that the circuit description is very simple, consisting of merely a single DO-CCCDTA and two grounded capacitors. Additionally, each function response can be selected by suitably selecting input signals. Without any external resistors and using only grounded elements, the proposed circuit is very suitable to further develop into an integrated circuit. PSPICE simulation results are depicted. The given results agree well with the theoretical anticipation. The maximum power consumption is approximately 1.81 mW at ±1.5 V power supply voltages.

[1]  A. Sedra.  Microelectronic circuits , 1982 .

[2]  V. K. Sharma,et al.  New current-mode universal biquad filter , 1999 .

[3]  Raj Senani,et al.  Universal current mode biquad using a single CFOA , 2004 .

[4]  Mike W. T. Wong,et al.  Efficient fault diagnosis of large scale analogue circuits based on symbolic method , 1999 .

[5]  Chun-Ming Chang,et al.  Novel universal current-mode filters using unity-gain cells , 2001 .

[6]  Mohmad Amin Malik,et al.  High impedance voltage- and current-mode multifunction filters , 2005 .

[7]  Dalibor Biolek,et al.  Current-mode KHN filter employing current differencing transconductance amplifiers , 2006 .

[8]  Chun-Ming Chang,et al.  Novel versatile insensitive universal current-mode biquad employing two second-generation current conveyors , 2003 .

[9]  Jiun-Wei Horng.  Current conveyors based allpass filters and quadrature oscillators employing grounded capacitors and resistors , 2005, Comput. Electr. Eng..

[10]  Jie Wu,et al.  Universal voltage- and current-mode OTAs based biquads , 1998 .

[11]  Christofer Toumazou,et al.  Analogue IC design : the current-mode approach , 1993 .

[12]  Vinod Kumar Singh,et al.  Novel electronically controllable current-mode universal biquad filter , 2004, IEICE Electron. Express.

[13]  R. Weng,et al.  New universal biquad filters using only two unity-gain cells , 2000 .

[14]  Akira Hyogo,et al.  A Digitally Programmable CMOS Universal Biquad Filter Using Current-Mode Integrators , 2002, IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences.

[15]  M. Bhushan,et al.  Grounding of capacitors in integrated circuits , 1967 .

[16]  Ching-Ting Lee,et al.  Versatile insensitive current-mode universal biquad implementation using current conveyors , 2001 .

[17]  Sajal K. Paul,et al.  A novel current controlled current mode universal filter: SITO approach , 2005, IEICE Electron. Express.

[18]  Worapong Tangsrirat,et al.  Systematic realization of cascadable current-mode filters using current differencing transconductance amplifiers , 2006 .

[19]  Nisar A. Shah,et al.  Voltage/Current-Mode Universal Filter Using FTFN and CFA , 2005 .

[20]  D. R. Frey,et al.  Log-domain filtering: An approach to current-mode fil-tering , 1993 .

[21]  Mehmet Sagbas,et al.  Electronically tunable current-mode second-order universal filter using minimum elements , 2004 .

[22]  Santiago Celma,et al.  Universal filter using unity-gain cells , 1995 .

[23]  Shahram Minaei,et al.  A 22.5 MHz current-mode KHN-biquad using differential voltage current conveyor and grounded passive elements , 2005 .