XFEM‐based element subscale refinement for detailed representation of crack propagation in large‐scale analyses

In the present paper, we address the delicate balance between computational efficiency and level of detailing at the modelling of ductile fracture in thin-walled structures. To represent the fine-scale nature of the ductile process, we propose a new extended finite element method-based enrichment of the displacement field to allow for crack tips that end or kink within an element. The idea is to refine the crack tip element locally in a way such that the macroscale node connectivity is unaltered. This allows for a better representation of the discontinuous kinematics without affecting the macroscale solution procedure, which would be a direct consequence of a regular mesh refinement. The method is first presented in a general 3D setting, and thereafter, it is specialised to shell theory for the modelling of crack propagation in thin-walled structures. The paper is concluded by a number of representative examples showing the accuracy of the method. We conclude that the ideas proposed in the paper enhance the current methodology for the analysis of ductile fracture of thin-walled large-scale structures under high strain rates.

[1]  R. Larsson,et al.  Theory and numerics for finite deformation fracture modelling using strong discontinuities , 2006 .

[2]  Thomas-Peter Fries,et al.  Hanging nodes and XFEM , 2011 .

[3]  Martin Fagerström,et al.  Dynamic fracture modeling in shell structures based on XFEM , 2011 .

[4]  P. Hansbo,et al.  An unfitted finite element method, based on Nitsche's method, for elliptic interface problems , 2002 .

[5]  L. J. Sluys,et al.  A new method for modelling cohesive cracks using finite elements , 2001 .

[6]  A. Atkins,et al.  Out-of-plane stretching and tearing fracture in ductile sheet materials , 1997 .

[7]  Timon Rabczuk,et al.  Modeling and simulation of kinked cracks by virtual node XFEM , 2015 .

[8]  T. Belytschko,et al.  New crack‐tip elements for XFEM and applications to cohesive cracks , 2003 .

[9]  Ted Belytschko,et al.  A method for dynamic crack and shear band propagation with phantom nodes , 2006 .

[10]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[11]  T. Belytschko,et al.  Non‐linear analysis of shells with arbitrary evolving cracks using XFEM , 2005 .

[12]  Martin Fagerström,et al.  Approaches to dynamic fracture modelling at finite deformations , 2008 .

[13]  E. Ramm,et al.  On the physical significance of higher order kinematic and static variables in a three-dimensional shell formulation , 2000 .

[14]  R. de Borst,et al.  A consistent geometrically non‐linear approach for delamination , 2002 .

[15]  A. Needleman,et al.  The simulation of dynamic crack propagation using the cohesive segments method , 2008 .

[16]  Rolf Stenberg,et al.  ECCOMAS 2012, 6th European Congress on Computational Methods in Applied Sciences and Engineering, University of Vienna, Austria, September 10-14, 2012 , 2012 .

[17]  Ted Belytschko,et al.  Smoothed nodal forces for improved dynamic crack propagation modeling in XFEM , 2010 .

[18]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[19]  R. Larsson,et al.  Hypo- and hyper-inelasticity applied to modeling of compacted graphite iron machining simulations , 2011 .

[20]  R. Larsson,et al.  Dynamic crack propagation in elastoplastic thin‐walled structures: Modelling and validation , 2013 .