A current source inverter with series connected AC capacitors for photovoltaic application with grid fault ride through capability

The current source inverter (CSI) is preferred to interface a renewable source such photovoltaics (PV) to the AC power grid because it can provide smooth current source in the DC side, which fits to the PV behaviour and also steps-up the voltage from DC side to AC side, which allows smaller and safer DC voltage levels to be used. However, the CSI has the problem that during an AC grid fault, it cannot operate properly. In this paper, a single-stage power conversion approach based on a CSI inverter with series capacitors is proposed, proven to provide improved efficiency and smaller DC inductor size and the capability to ride through AC grid faults with full reactive power injection support when compared to a standard CSI.

[1]  Remus Teodorescu,et al.  Leakage current evaluation of a singlephase transformerless PV inverter connected to the grid , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[2]  G. Joos.  Wind turbine generator low voltage ride through requirements and solutions , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[3]  M. Salo,et al.  A Novel Vector Controlled Current Source Shunt Active Power Filter with Reduced Component Voltage Stresses , 2007, 2007 IEEE Power Electronics Specialists Conference.

[4]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[5]  Frede Blaabjerg,et al.  A new power converter for fuel cells with high system efficiency , 2003 .

[6]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[7]  S. Fukuda,et al.  Current source rectifier/inverter system with sinusoidal currents , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[8]  Patrick Wheeler,et al.  A more efficient current source inverter with series connected AC capacitors for photovoltaic and fuel cell applications , 2008 .

[9]  Mutschler,et al.  Inverters without transformer in grid connected photovoltaic applications , 1995 .

[10]  I. Erlich,et al.  Grid code requirements concerning connection and operation of wind turbines in Germany , 2005, IEEE Power Engineering Society General Meeting, 2005.

[11]  C. Klumpner.  A New Single-Stage Current Source Inverter for Photovoltaic and Fuel Cell Applications using Reverse Blocking IGBTs , 2007, 2007 IEEE Power Electronics Specialists Conference.

[12]  Gerard Ledwich.  Current source inverter modulation , 1991 .

[13]  Jayanti,et al.  Rating requirements of a unified power quanty conditioner (UPQC) for vortage ride through capability enhancement , 1988 .

[14]  J. Schlabbach.  Low voltage fault ride through criteria for grid connection of wind turbine generators , 2008, 2008 5th International Conference on the European Electricity Market.